Module 2 SPA 6322
Audiologic Rehabilitation and Hearing Aids
Audiologic rehabilitation encompasses various methods and technologies, with a primary focus on hearing aids as the most common form.
The efficiency of hearing aid selection is inversely correlated with the reliance on visual and situational cues.
Effective hearing is essential for awareness of the environment and for receiving and expressing moods and emotions.
**Goal of Audiologic Rehabilitation: ** Enable individuals with hearing impairment to maximize their residual hearing potential.
Historical Evolution of Hearing Aids
Earliest forms:
Hand-cupping: Increased sound by approximately 12 dB at 1 kHz.
Use of animal horns and seashells.
Development of ear horns and ear trumpets in early history.
1800s:
Introduction of electronic hearing aids, suitable mostly for mild losses, initially as tabletop devices.
Introduction of carbon hearing aids led to smaller designs.
Development of vacuum tube devices allowed for amplification of more severe losses, producing clearer and more powerful sounds.
1950s:
Introduction of transistor technology revolutionized hearing aids, leading to smaller batteries and the feasibility of behind-the-ear (BTE) models.
1960s:
Development of in-the-ear (ITE) hearing aids, evolving from concha-filling models to completely-in-the-canal (CIC) models, which are now nearly invisible.
Recent advancements:
Transition from analog to digital technology since the late 1980s.
Compatibility with Bluetooth technology, leading to further miniaturization and efficiency in designs.
Main Components of Hearing Aids
Microphone:
Picks up sound or acoustic energy and converts it to an electrical signal.
Common types:
Electret microphones are popular due to their wide frequency range, low mechanical vibration sensitivity, and low noise.
Typically equipped with two microphones for better directionality.
Directional vs. Omnidirectional microphones:
Omnidirectional: Sensitive to sound from all directions.
Directional: Better sensitivity primarily from one direction, usually front-facing.
Amplifier (Digital Processor):
Amplifies the acoustic signal.
Uses integrated circuits for compact design and allows for selective frequency amplification.
Digital signal processing (DSP) allows personalized hearing aid fitting, minimizing feedback and enhancing speech understanding in noise.
Equipped with algorithms for optimal performance in various environments, allowing for dynamic adjustments through dual processors.
Receiver:
Converts the amplified electrical signal back into sound.
Often a microphone in reverse, with certain designs featuring bone conduction output (BC receiver).
Modern devices separate the microphone from the receiver to enhance placement within the ear canal for optimal function.
Battery:
Powers the devices, commonly using zinc-air batteries, rated at 1.4 volts.
Color-coded for quick identification: Blue (675), Orange (13), Brown (312), Yellow (10A), Rarely Red (5).
Shift towards rechargeable lithium-ion batteries, offering longer lifespan and convenience but requiring special handling considerations.
Computer Chip:
Contains the intricate algorithms that manage the digital functions of the hearing aid.
Advances in Hearing Aid Fitting and Technology
Circuit Designs:
Constant evolution with new signal processing formulas affecting fitting processes.
Probe-Microphone Measurements and Speech Mapping:
Techniques for measuring the hearing aid output at the patient's eardrum.
Includes standardized measurements from a test box for hearing aids.
Computerization:
Software usage for hearing aid specifications, fitting methods, adjustment capabilities, and questionnaires.
Miniaturization:
Development of CIC models, increasing accessibility for users with mild losses.
Bluetooth and RF Technologies:
Enhanced pairing capabilities with smartphones and smart devices.
Modern capabilities allow for remote programming and adjustments post-COVID-19.
Optional Controls and Features in Hearing Aids
On-off Switch:
Essential in older models, now more prevalent in remote controls instead of the devices themselves.
Telecoil:
An induction circuit that can filter out microphone sounds to focus on electromagnetic signals from phones.
Commonly found in most BTEs, with limited applicability in ITEs and CICs.
Volume Control:
Adjusts the amplification level, with newer models integrating controls on mobile apps.
Tone Control:
Allows adjustment of frequency response, typically focusing on reducing low frequencies.
Directional Microphones:
Two to three microphones designed to improve signal clarity in noisy environments, using polar plots to determine directionality needs.
Noise Cancellation Technology:
Widely employed to enhance signal clarity and minimize feedback.
Program Button:
Switches between multiple pre-set programs (up to four).
Frequency-Specific Gain Control:
Customizes amplification according to the individual's hearing loss profile at different frequencies.
Output Limiting Techniques:
Ensures maximum output does not exceed comfort levels, utilizing:
Peak Clipping: Linear increase until limits are reached, potentially distorting the signal.
Compression: Non-linear, regulating output dynamically to avoid discomfort or distortion.
Wide Dynamic Range Compression (WDRC) / Automatic Gain Control (AGC) for adjustable input and output monitoring.
Digital Signal Processing (DSP):
Transforms analog signals to digital for enhanced manipulation.
Remote Control:
Handy device for adjusting settings and connecting Bluetooth functionalities.
Bluetooth/RF Modules:
Facilitate direct streaming from TVs or phones, improving accessibility.
Remote Microphone:
Connects directly to the hearing aids for focused listening from remote sources.
Testing and Standards for Hearing Aids
Electroacoustic Properties: Evaluated by ANSI Standards:
Saturation Sound Pressure Level (SSPL90): Measurement of maximum sound level when input reaches 90 dB SPL, maintained below the user’s loudness discomfort level (LDL).
Acoustic Gain (HFA Gain): Amount of amplification derived from an input sound compared to output.
Frequency Response: Range of frequencies that a hearing aid can effectively amplify.
Total Harmonic Distortion (THD): Represents the clarity and intelligibility of delivered sounds compared to original input, aiming for minimal distortion.
Reference Test Gain: Describes average amplification at a given input sound.
Testing methods often include the use of a test box for standardized measurements; different methods are applied for BTEs and ITEs using KEMAR standards for realistic results.
Understanding Hearing Aid Specifications
Example of Hearing Aid Model: Super-Front PP-C-4.
PP stands for push-pull amplification.
C denotes compression capabilities to limit maximum amplifications.
Number 4 indicates the quantity of adjustment controls.
SSPL 90 Level: 140 dB SPL indicates high output capacity, and HF Average SSPL 90 measures average output at high frequencies.
Frequency Response: Adjustments across variable settings to optimize per individual needs.
Battery Current Drain: Measures consumption, indicating how long batteries will last typically assessed at 3.3 mA.
Types of Hearing Aids and Implants
Body Aids:
Powerful but bulky, used for cases where BTE models are unsuitable.
Eyeglass Aids:
Rarely used due to weight and design limitations.
BTE (Behind-The-Ear) Aids:
Known for flexibility in fitting, more robust for profound losses, although viewed less favorably for aesthetics.
ITE (In-The-Ear) Aids:
Fill the outer ear, historically the most common but facing challenges with kids regarding feedback and comfort.
ITC (In-The-Canal) Aids:
Smaller, with cosmetic advantages but limited amplification power.
CIC (Completely-In-the-Canal) Aids:
Invisible but may face issues related to dexterity for insertion/removal.
IIC (Invisible-In-the-Canal) Aids:
The smallest type, very discreet for those conscious of appearance.
RIC (Receiver-in-the-Ear) Aids:
A popular choice with separation between receiver and body, resulting in better frequency response.
CROS/BiCROS Aids:
Devices using contralateral routing for unilateral hearing loss patients.
Bone Conduction Aids:
Designed for patients without a viable ear canal; e.g., BAHA systems.
Brainstem Implants:
Bypasses cochlear structures, placed directly onto the brainstem for sound perception.
Assistive Listening Devices:
Various technologies supplementing or replacing hearing aids.
Future Considerations in Hearing Technology
Research is ongoing into fully implantable devices, automated earmold scanning, hair cell regeneration, and pharmaceutical strategies for hearing loss mitigation.
The American FDA has legalized Over the Counter (OTC) hearing devices targeting adults with mild to moderate loss.
Ethical concerns regarding OTC devices include potential risks of untreated conditions and self-diagnosis pitfalls.
Ongoing investigations into hidden hearing loss (cochlear synaptopathy) raise awareness of challenges faced by those with seemingly normal audiograms but difficulty in noisy social environments.