sour mashing to extract deffinations

Introduction to Sour Beers

  • Sour beers, particularly "fast sour beers," are gaining popularity and can be prepared quickly, similar to regular ales.

  • Objective: Achieve a desirable level of lactic acidity within a short timeframe.

  • Key Concept: Souring is caused by lactobacillus strains, which are sensitive to hop acids, limiting their effectiveness in highly hopped beers.

Types of Sour Beer Techniques

Sour Mashing

  • Involves allowing a normal mash to remain warm after inoculating lactobacillus.

  • Process Overview:

    • Acidify the mash to lower pH (around 4.5) through:

      • Addition of food grade acid

      • Acidulated malt

      • Biological acidification.

    • Heat mash to lock in fermentable sugar spectrum.

    • Cool to 120°F before inoculating with lactobacillus.

  • Precautions:

    • To prevent acetic acid formation, maintain an inert gas blanket and seal the vessel from air ingress.

  • Monitoring:

    • pH monitored after 24-36 hours.:

      • Target pH for Berlinerweiss and Goza is around 3.6.

      • 3.3 is for more sour lambics.

    • Titration is essential to assess total acidity alongside pH readings to measure perceived sourness accurately.

Kettle Souring

  • Involves souring occurs on the collected wort after the mashing process:

    • Sterilize wort with a short boil, cool to ~120°F, inoculate with lactobacillus under CO2 blanket.

    • Sour until desired pH/TA achieved, then boil and add hops before fermentation.

  • Control: Kettle souring is generally easier and offers better consistency compared to sour mashing.

Traditional Techniques and Historical Context

  • Kettle souring has origins in Belgian brewing around 1822, where thick mashes were needed due to taxation on mash ton size.

  • Use of raw wheat instead of malted led to adaptations in the brewing process:

    • Beta-glucan rest incorporated due to the need to handle adjuncts.

  • Traditional methods produced cloudy wort with starches and complex molecules, allowing flavors to develop over long fermentation periods with specific yeasts (e.g., Brettanomyces).

Wort Composition and Extract Values

  • Discussing grain behavior during brewing:

    • Significant portion remains in spent grains and contributes to extract losses occurring during processing due to various inefficiencies.

    • Majority of malt weight contributes to original wort gravity prior to fermentation.

    • Fermentation converts extract into alcohol, CO2, and byproducts, leaving behind non-fermentable extracts in the beer.

  • Knowledge Check:

    • Incomplete conversion may lead to less fermentable extract, lower yields, and flavor instability. Tool for testing: iodine test (not absolute, used for comparison).

Extract Values Defined

  • Original Extract: Concentration of soluble components in wort before fermentation—equivalent to original gravity.

  • Real Extract: Concentration of remaining soluble substances post-fermentation, calculated by boiling liquid off.

  • Apparent Extract: Measured extract in liquid, factoring in the density difference caused by alcohol, leading to deeper hydrometer readings.

  • Terminal gravity at the end of fermentation equals specific gravity when only non-fermentables are left.

  • Conclusion: The definitions of real and apparent extracts help clarify their roles in evaluating the fermentation process and resulting beer characteristics.