Calculus III: Multivariate Functions, Partial Differentiation, and Multiple Integration
Section 15.1: Functions of Several Variables
Multivariate Functions: Unlike vector-valued functions (which have one independent variable and several dependent variables), multivariate or multivariable functions possess one dependent variable and several independent variables.
Functions of Two Independent Variables: Most properties are developed for functions with two independent variables, and , and a dependent variable .
- Explicit Form: .
- Implicit Form: .
Domains and Ranges:
- The Domain is the collection of all ordered pairs in the plane that produce a real output. This differs from single-variable calculus where the domain is an interval of single values.
- The Range is the set of resulting real outputs.
Graphs of Functions of Two Independent Variables: The graph is the set of all points satisfying .
- Vertical Line Test: A relation is a function if every line parallel to the -axis intersects the graph at most once.
Level Curves:
- A contour curve is a path on a surface where the elevation (the -value) is a constant .
- When a contour curve is projected onto the -plane, it produces the equation , known as a level curve.
- A set of level curves provides a 2D representation of a 3D surface.
- Proximity Rule: Closely spaced level curves indicate that the surface is changing more rapidly (steeper), while spread-out curves indicate a slower change.
Functions of Three or More Independent Variables:
- Algebraic properties and definitions of domain/range extend naturally.
- Visualization: A function of three independent variables has a graph in four dimensions, making it difficult to visualize. Graph work is generally limited to two independent variables, though algebra and calculus calculations apply to any number of variables.
Section 15.2: Limits and Continuity
Definition of a Limit: A function of two independent variables has a limit if, as approaches a fixed point , the distance can be made arbitrarily small for all points in the domain sufficiently close to .
- Notation:
Single Variable vs. Two-Variable Limits:
- In single-variable calculus (), a limit exists if the left-hand and right-hand limits match (only two directions).
- In multivariable calculus, a point on a surface can be approached from infinitely many paths.
- Existence Requirement: For a limit to exist, the function must approach the same value from every possible path.
Basic Limit Laws:
- Limits can be evaluated using substitution if the function is continuous.
- If substitution results in an indeterminate form, algebraic techniques (factoring, canceling, rationalization) should be employed.
Showing a Limit Does Not Exist:
- To prove a limit does not exist, find two different paths in the domain that lead to different values being approached.
- Critical Warning: Finding two paths that approach the same value is not sufficient to prove a limit exists, as two paths do not represent all paths.
Continuity:
- A function is continuous at if .
- This core definition and the rules for composite functions remain the same as single-variable calculus.
Topological Definitions:
- Interior Point: A point where there exists an open disk centered at the point contained entirely within the set.
- Boundary Point: A point where every open disk centered at the point contains both points inside and outside the set.
- Open Set: A set consisting entirely of interior points.
- Closed Set: A set that contains all its boundary points.
Section 15.3: Partial Derivatives
Concept: If standing on a surface at point , the slope depends on the direction of travel (e.g., walking East/up-hill vs. North/down-hill).
- Partial Derivative with respect to (): Fix as a constant and differentiate with respect to . This represents the slope of the surface in the -direction.
- Partial Derivative with respect to (): Fix as a constant and differentiate with respect to . This represents the slope in the -direction.
Limit Definitions:
Notation:
- Leibniz notation uses the (del) symbol: or .
- Subscript notation: or .
Higher-Order Partial Derivatives:
- Pure Partials: Differentiating with respect to the same variable repeatedly (e.g., ).
- Mixed Partials: Differentiating with respect to different variables in sequence (e.g., or ).
Mixed Partial Notation & Ordering:
- Subscript Notation: Differentiate from left to right (e.g., means differentiate by first, then ).
- Leibniz Notation: Differentiate from right to left (e.g., means differentiate by first, then ).
Equality of Mixed Partials (Clairaut's Theorem): If and are continuous on an open set, then they are equal (). This applies to higher orders, such as , provided continuity is maintained.
Differentiability:
- A function is differentiable at if partial derivatives exist in a neighborhood and are continuous.
- Theorem: If a function is differentiable at a point, it is also continuous at that point.
Section 15.4: Chain Rules
Chain Rule (One Independent Variable): If where and , then is ultimately a function of the single independent variable .
- The Tree Diagram: branches to and (partial); and branch to (ordinary).
- Formula:
- Definitions: is the dependent variable, is the independent variable, and are intermediate variables.
Chain Rule (Several Independent Variables): If where and .
- Formula for :
- Formula for :
Implicit Differentiation (Partial Style): Given an implicit relation , where is a function of :
- Resulting formula:
Section 15.5: Directional Derivatives and the Gradient
Directional Derivatives: Partial derivatives only quantify change parallel to the axes. The directional derivative calculates the rate of change in any direction specified by a unit vector .
- Limit Definition:
- Calculation Theorem: If is differentiable, then .
The Gradient Vector:
- In 2D:
- In 3D:
- Relationship to Directional Derivative: .
Interpretations of the Gradient:
- The direction of maximum rate of increase is . The magnitude of this increase is .
- The direction of maximum rate of decrease is . The magnitude of this rate is .
- The directional derivative is zero in any direction orthogonal to .
Gradients and Level Curves/Surfaces:
- The gradient vector is always orthogonal to the level curve at point .
- In 3D, the gradient is orthogonal to level surfaces.
Section 15.6: Tangent Planes, Linear Approximations, and Differentials
Tangent Plane for Implicit Relations: For a surface , the gradient serves as the normal vector to the tangent plane at point .
- Equation:
Tangent Plane for Explicit Surfaces: For , the gradient of the surface rewritten as gives properties , , and .
- Formula:
Linear Approximation: The tangent plane can linearly approximate the value of a function near a point .
- Equation:
The Differential (): Approximates the change in the dependent variable when moving from point to .
- Equation:
Section 15.7: Local Maxima and Minima
Critical Points: A point is a critical point if and , or if either partial derivative is undefined.
Saddle Points: A point is a saddle point if in every open disk centered at , there exist points where and points where .
Second Derivative Test: Let be a critical point and define the determinant .
- Local Minimum: If and .
- Local Maximum: If and .
- Saddle Point: If .
- Inconclusive: If .
Section 16.1: Double Integrals over Rectangular Regions
Riemann Sum Formulation: A rectangular region in the -plane is partitioned into subrectangles with area . The volume of boxes under surface approximates the volume under the surface.
- Double Integral Definition:
Iterated Integrals: Double integrals are evaluated by performing partial integration repeatedly.
- Evaluate the inner integral while fixing outer variables.
- Evaluate the outer integral with respect to the remaining variable.
Fubini's Theorem: For a rectangular region, the order of integration does not matter:
Average Value: The average value of over a rectangular region is given by:
Section 16.2: Double Integrals over General Regions
Type I Regions: Bounded above and below by continuous functions of : for .
- Setup:
Type II Regions: Bounded left and right by continuous functions of : for .
- Setup:
Critical Rules for Non-Rectangular Regions:
- Variables in Limits: The variable of integration cannot appear in the limits of the same integral (e.g., if integrating , limits cannot contain ), nor can they appear in any outer limits.
- Switching Order: You cannot simply swap the differentials and limits. You must sketch the region and redefine the bounding functions (from -perspective to -perspective or vice-versa).
Volume Between Two Surfaces: If , the volume is:
Area Calculated by Double Integration: If the integrand is set to , the numerical result of the double integral equals the area of region .
Section 16.3: Double Integrals in Polar Coordinates
Polar Rectangle: A region defined by and .
Conversion to Polar Integration: When converting from Cartesian to polar, the differential transforms to .
- Formula:
- Critical Note: Do not forget the extra factor of in the integrand.
Coordinate Relations: