Alberta Basic Licence Drivers Assessment Study Guide

Speed Limits, Distance Guidelines, and Roadway Scanning

The basic speed limit outside a city, town, or village on a primary highway is 100 km/h100\,km/h unless posted otherwise. Speed limit signs specify the maximum legal speed permitted when driving conditions are favourable. Drivers must never exceed the posted speed limit, even when passing another vehicle on a primary highway or passing multiple vehicles simultaneously. In construction zones, drivers must strictly obey the posted speed limits at all times, regardless of whether it is daylight, whether workers are present, or whether a flag person is posted.

In urban areas, drivers should scan the road ahead by approximately 12 to 15 seconds12 \text{ to } 15\,seconds. To maintain a safe following distance behind another vehicle, drivers should apply the 2-second2\text{-second} rule, which provides an accurate distance measure at any speed. School zone speed limits, unless posted otherwise, are in effect on school days during three specific daily time windows: from 8:00 A.M.8:00\,\text{A.M.} to 9:30 A.M.9:30\,\text{A.M.}, from 11:30 A.M.11:30\,\text{A.M.} to 1:30 P.M.1:30\,\text{P.M.}, and from 3:00 P.M.3:00\,\text{P.M.} to 4:30 P.M.4:30\,\text{P.M.}. At 9:00 A.M.9:00\,\text{A.M.} on a school day, the maximum speed limit in a school zone is 30 km/h30\,km/h. Playground zones are in effect every day from 8:30 A.M.8:30\,\text{A.M.} until 1 hour1 \text{ hour} after sunset.

Vehicle Maneuvering, Reversing, and Parking Rules

When backing a passenger vehicle to the left, the driver must look over their left shoulder while making occasional glances to the front. To reverse a vehicle in a straight line, the proper procedure is to place the left hand at the top of the steering wheel and look over the right shoulder directly through the rear window. Before executing a turn or changing lanes, drivers must perform a shoulder check, which is defined as glancing towards the blind spot in the direction the driver intends to move. When exiting a parallel parking space on the right side of a road, the driver must perform a shoulder check to the left before pulling into traffic.

A parking lane is defined as that portion of a primary highway located between the edge of the roadway to the right of traffic flow and the nearest solid white line marked on the roadway (excluding the centre line). When parallel parking, the vehicle's wheels closest to the curb must be positioned within a maximum distance of 30 cm30\,cm from the curb. For angle parking, the front wheel closest to the curb must be within a maximum distance of 50 cm50\,cm from the nearest curb. When parking uphill on a two-way road with a curb, the vehicle's front wheels must be turned to the left. Parking is strictly prohibited within 5 m5\,m of a Stop sign and within 5 m5\,m of a fire hydrant. Parking in spaces designated for persons with disabilities is permitted only when the vehicle displays an official identifying placard or licence plate.

Intersection Rules, Right-of-Way, and Traffic Circles

When facing an intersection with a traffic control light displaying a green right-turn arrow along with a red light, a driver may proceed in the direction of the arrow without stopping, provided it is safe to do so. Making a right turn on a solid red traffic light is permitted provided the driver stops completely, checks left and right, yields the right-of-way to all oncoming traffic and pedestrians, and ensures no sign prohibits the turn. When making a left turn at a steady green traffic light, the driver does not have automatic right-of-way and must not cross the path of an approaching vehicle unless it is safe to clear the intersection.

When approaching a Yield sign, a driver must yield the right-of-way to all traffic not facing the sign as well as any pedestrians within the intersection. At an uncontrolled "T" intersection—an intersection lacking all traffic signs and signal lights—where two vehicles approach at right angles at approximately the same time, the vehicle on the left must yield the right-of-way to the vehicle on the right. When entering a traffic circle, drivers must yield the right-of-way to vehicles already circulating within the traffic circle. A weave zone is an area on a highway where entrance and exit lanes are situated close together, requiring vehicles slowing down to exit the highway to maneuver between vehicles accelerating to enter.

When turning left from a two-way road onto a one-way road, the vehicle must turn into the lane nearest the left curb of the one-way road. To turn left from a one-way road, unless posted otherwise, the driver must position the vehicle in the left lane nearest the left curb. Dual turns at an intersection are permitted exclusively when indicated by pavement markings or official traffic control signs. When exiting a parking lot onto a roadway, a vehicle must come to a complete stop before crossing the sidewalk or entering the street. Drivers must yield the right-of-way to funeral processions crossing an intersection and must never break through the procession. When a pedestrian stands at a crosswalk with an arm raised at a right angle pointing toward the opposite curb, drivers are legally required to stop and yield to the pedestrian.

Traffic Control Signals, Light Indications, and Lane Markings

A traffic-lane control signal displaying an illuminated red "X" indicates that travel is strictly prohibited in that specific lane. A flashing red traffic light requires a driver to come to a complete stop and proceed only when it is safe to do so. A steady yellow traffic light indicates that drivers must stop prior to entering the intersection unless the stop cannot be made in safety. A flashing yellow traffic light alerts drivers to proceed through the intersection with caution.

A single solid white line separating driving lanes in an urban area signifies that lane changing is prohibited between those lanes. On a highway, a solid yellow line combined with a broken yellow line marked at the centre line indicates that passing is permitted only for vehicles on the side of the broken yellow line. A large "X" painted directly onto the pavement indicates a railway crossing ahead. Acceleration lanes are designated merge lanes used by entering vehicles to accelerate to highway speeds. When driving in the right lane of a highway and another vehicle attempts to merge from an acceleration lane, the driver should move into the left lane if safe, or be prepared to adjust speed. Deceleration lanes are specialized lanes where vehicles reduce speed when exiting a highway.

Road Signs and Specific Sign Classifications

Specific road signs communicate distinct highway regulations, warnings, and information. A sign depicting a truck carrying dangerous goods designates a dangerous goods route. A warning sign showing a curved arrow indicates a winding road ahead, while a sign showing a Yield symbol warns of a Yield sign ahead. A sign displaying two opposing arrows signifies divided highway ends, whereas a sign showing a divided roadway split indicates a divided highway begins. A sign illustrating a physical raised surface indicates a bump ahead. An added lane sign indicates a free-flow merging situation where entering traffic receives its own designated lane.

A circular sign displaying a white horizontal bar inside a red circle signifies "Do not enter". Signs displaying a silhouette of children or pedestrians indicate school zones, playground zones, school crosswalks, or pedestrian crosswalks depending on the exact symbol. A sign displaying an advance warning of traffic lights indicates a traffic control signal ahead. A sign with a straight arrow and a right-turning arrow indicates that drivers in that lane may proceed straight through or turn right. A sign depicting a black silhouette of a flag person or construction workers indicates construction zones ahead where people are working. A triangular emblem on the rear of a vehicle indicates a slow-moving vehicle. A sign featuring a primary highway route number serves as a primary highway route marker. Hazard markers indicate roadside obstructions or physical hazards.

Graduated Driver Licensing (GDL), Demerits, and Legal Obligations

Under the Graduated Driver Licensing (GDL) program, a Class 7 learner is prohibited from operating a motor vehicle between the hours of midnight (12:00 A.M.12:00\,\text{A.M.}) and 5:00\,\text{A.M.. A Class 7 learner licence is suspended upon accumulating 8 demerit points8\,demerit\,points. A driver must complete a minimum of 2 years2\,years as a probationary Class 5 driver before fully graduating from the GDL program. A fully licenced driver (non-learner, non-probationary) accumulates a suspension upon reaching 15 demerit points15\,demerit\,points. Under GDL regulations, a driver receives 2 demerit points2\,demerit\,points for carrying more passengers than there are functioning seat belts in the vehicle.

Parents or legal guardians have the right to withdraw previously given parental consent for a driver under 18 years18\,\text{years} of age, provided the individual remains under 1818 and is neither married nor self-supporting. The driver is solely responsible and legally obligated to report any medical condition, physical disability, or change in health that could impair their ability to drive safely. Drivers are legally responsible for ensuring that all passengers under 16 years16\,\text{years} of age are properly secured with seat belts or child safety restraints. Drivers must report any collision to the police immediately if anyone is injured or killed, or if the combined damage to all vehicles and property exceeds $1000\$1000. A driver examiner will refuse to conduct a road test if the test vehicle is determined to be mechanically unsafe.

Safety Regulations, Special Vehicles, and Emergency Scenarios

When passing a large truck on a two-way highway, drivers must leave extra space before returning to their lane to avoid cutting off the truck. A slow-moving vehicle sign must be mounted on the rear of any vehicle that normally travels at speeds less than 40 km/h40\,km/h. When approached from any direction on a two-way road by an emergency vehicle with its siren sounding, the driver must pull over as close as possible to the right curb or edge of the roadway and come to a complete stop. When approaching a stopped school bus displaying alternating flashing amber lights, drivers should prepare to stop, as this signals that alternating flashing red lights will activate once the bus stops. When approaching the rear of a stopped school bus with alternating flashing red lights activated, drivers must stop completely behind the bus and remain stopped until the red lights cease flashing.

Passing a vehicle that has stopped to allow a pedestrian to cross the road is strictly illegal; rear-approaching vehicles must not pass. When adjusting a vehicle's head restraint, the centre of the restraint must be level with the top of the driver's ears. When a "PASSING LANE AHEAD" sign is posted, drivers of slower-moving vehicles should move into the right lane as soon as it is safe to do so. In the driver's handbook, "nighttime" is explicitly defined as the period starting 1 hour1\,hour after sunset and ending 1 hour1\,hour before the following sunrise. When approaching a railway crossing with activated flashing red lights and bells, drivers must stop at least 5 m5\,m from the nearest rail and wait until the train has cleared. Passing a turning loaded log-haul truck is extremely hazardous because a danger zone exists where the rear log overhang can sweep across and block all lanes of the highway during the turn. On a two-lane highway, passing another vehicle travelling in the same direction should be executed on the left when safe. If followed by another vehicle attempting to pass on a two-way road, the driver should maintain their speed, stay in their lane, and move to the right portion of the lane.

Vehicle Control, Braking Techniques, and Adverse Driving Conditions

"Over-driving" headlights at night occurs when a driver travels at a speed that prevents them from stopping within the distance illuminated by their headlights. Headlights must be dimmed to low beam at night when approaching another vehicle from behind at a minimum distance of 150 m150\,m. During conditions of reduced visibility caused by fog, smoke, or snow, drivers must use their low beam headlights. When stopping in traffic behind another vehicle, drivers should maintain sufficient space to steer into another lane without having to reverse. If a vehicle is tailgating, the driver should gradually reduce speed to encourage the tailgating vehicle to pass safely.

In vehicles without anti-lock brakes (ABS), "threshold braking" is the technique of applying steady braking pressure up to the point just before the wheels lock, and easing off slightly if locking occurs. The recommended braking technique for a normal, smooth stop is to apply brake pressure, ease off slightly just before the vehicle comes to a complete halt, and then re-apply sufficient pressure to stop smoothly. Seat belts must be worn properly by drivers and passengers at all times in Alberta. When recovering from a vehicle skid, the driver should steer in the direction they want the front of the vehicle to go without locking the brakes or over-accelerating. Most skids are caused directly by driver error. When approaching the crest of a hill on a two-lane highway, drivers should keep to the right portion of their lane. When entering a highway via a merge sign, drivers should observe traffic flow, match highway speed in the acceleration lane, and blend smoothly into a gap. If a vehicle's right wheels drop off the paved road onto the shoulder, the driver should hold the steering wheel firmly, ease off the accelerator pedal, and gradually steer back onto the paved roadway. To negotiate a highway curve safely, drivers should reduce speed before entering the curve, stay within their lane, and gently accelerate after entering the curve.