Electrochemistry: Constant Current, Faraday's Constant, and the Electrolysis of Seawater

Fundamental Units of Charge and Time

  • Electric Charge (qq)

    • The unit of measurement for electric charge is the Coulomb (CC).
    • Definition of a Coulomb: One Coulomb is equivalent to one Joule per Volt (C=J/VC = J/V).
  • Time (tt)

    • The official International System (SI) unit for time is the second (ss).
    • Sponsorship of the definition: The second is based on the decay of a radioactive isotope, which is the mechanism used in atomic clocks.
    • Traditional units derived from seconds include minutes, hours, and days.

Faraday's Constant (FF)

  • The value of the Faraday constant is approximately 9.65×1049.65 \times 10^4.
  • Dimensional options for Faraday's Constant:
    • It can be expressed as Volt-moles (V⋅mol−1V \cdot mol^{-1}).
    • It can also be expressed as Coulombs per mole (C⋅mol−1C \cdot mol^{-1}).
  • Selection of the unit depends on which part of the definition is more salient to the specific calculation or system being modeled.

Electroplating Systems and Current Modeling

  • Current (II)
    • Current is measured in Amperes (AA or Amps).
    • Formula: Current=ChargeTime\text{Current} = \frac{\text{Charge}}{\text{Time}}, or I=qtI = \frac{q}{t}.
  • Constant Current
    • In mathematical modeling, constant current is assumed for simplicity.
    • In real-world applications, current is not always constant due to brownouts, electrical surges, and other fluctuations.
    • Designing electronics to handle these fluctuations is possible but complicates mathematical modeling significantly.

Case Study: Electroplating Copper (CuCu)

  • Scenario Parameters
    • A constant current is passed for a duration of 5 hours5\text{ hours}.
    • The process results in the deposition of 404 mg404\,mg of copper.
  • Stoichiometry Path
    1. Convert mass of copper to moles of copper.
    2. Relate moles of copper to moles of electrons transferred based on the half-reaction (two moles of electrons per mole of copper).
    3. Convert moles of electrons to Coulombs using Faraday’s constant.
    4. Convert Coulombs to Amperes by dividing by time (in seconds).
  • Step-by-Step Calculation
    • Mass Conversion: 0.404 g Copper0.404\,g\text{ Copper}.
    • Moles of Copper: 63.6 g63.6\,g in 1 mole1\,mole of copper (0.404 g×1 mol63.6 g0.404\,g \times \frac{1\,mol}{63.6\,g}).
    • Electron Relationship: Two moles of electrons per one mole of copper (2 mol e−/1 mol Cu2\,mol\,e^- / 1\,mol\,Cu).
    • Charge in Coulombs: 0.404 g63.6 g/mol×2×(9.65×104 C⋅mol−1)=1.226×103 C\frac{0.404\,g}{63.6\,g/mol} \times 2 \times (9.65 \times 10^4\,C \cdot mol^{-1}) = 1.226 \times 10^3\,C.
    • Time Conversion: 5 hours=18,000 seconds5\text{ hours} = 18,000\text{ seconds}.
    • Final Current calculation: 1.226×103 C18,000 s=0.0681 A\frac{1.226 \times 10^3\,C}{18,000\,s} = 0.0681\,A.

Questions & Discussion

  • Question regarding the Electron-to-Coulomb conversion: How are we getting the number of electrons to coulombs?
    • Response: We determine the number of electrons transferred per mole of copper from the half-reaction. Then, we use Faraday's constant (9.65×104 C/1 mol e−9.65 \times 10^4\,C / 1\,mol\,e^-) to convert moles of electrons into Coulombs.
  • Clarification on Symbols: Is the notation for current and charge confusing?
    • Response: Yes. If CC is alone, it stands for Coulombs. Current is measured in Amps (AA). In physics, current is often represented by a capital II.
  • Discussion on Significant Figures: A student's calculation was on track but needed one more significant figure. The lecturer corrected the calculation to achieve 0.0681 A0.0681\,A.

Halogens as Oxidizing Agents

  • Chlorine (Cl2Cl_2):
    • Produces substance commonly known as bleach.
  • Bromine (Br2Br_2):
    • Used as an oxidizing agent in hot tubs to maintain cleanliness.
  • Fluorine (F2F_2):
    • A very strong oxidizing agent.
    • The lecturer notes that public fear regarding fluoride in drinking water is often based on internet misinformation confusing the dangers of reactive fluorine gas with fluoride ions (F−F^-).
  • Iodine (I2I_2):
    • Obtained generally from seawater.
    • Used as a topical antiseptic when dissolved in alcohol (ethanol).
    • It leaves a characteristic purple mark on the skin, which serves as a visual indicator that the skin has been cleaned and is ready for medical procedures like vaccinations.

Case Study: Producing Iodine (I2I_2) from Seawater

  • Reaction Details
    • Iodine is produced and collects on the cathode.
    • The other half-reaction involves a platinum electrode and the reduction of water to hydrogen gas (H2H_2).
  • Problem Parameters
    • Current (II) = 8.52 mA8.52\,mA (milliamps).
    • Time (tt) = 10 minutes10\text{ minutes}.
  • Calculation Steps
    • Charge (qq): 8.52×10−3 C/s×600 s=5.112 C8.52 \times 10^{-3}\,C/s \times 600\,s = 5.112\,C.
    • Moles of Electrons: 5.112 C/9.65×104 C⋅mol−1=5.297×10−5 mol e−5.112\,C / 9.65 \times 10^4\,C \cdot mol^{-1} = 5.297 \times 10^{-5}\,mol\,e^-.
    • Moles of Iodine (I2I_2): There is a 1:21:2 ratio (one mole of diatomic iodine for every two electrons).
    • Mass of Iodine: Molar mass of I2I_2 is 254 g/mol254\,g/mol.
    • Result: 5.1129.65×104×12×254=6.73×10−3 g\frac{5.112}{9.65 \times 10^4} \times \frac{1}{2} \times 254 = 6.73 \times 10^{-3}\,g or 6.73 mg I26.73\,mg\,I_2.

Industrial Application: The Chlor-Alkali Process

  • Definition: The process of undergoing electrolysis on seawater.
  • Resources Extracted: Seawater is a rich source of materials including:
    • Bleach.
    • Baking soda and Baking powder.
    • Sodium carbonate (Na2CO3Na_2CO_3).
    • Sodium hydroxide (NaOHNaOH).
    • Halogens.
  • Medicinal Production: For medicinal iodine products, the harvested iodine is dissolved in ethanol (creating a tincture) and then typically mixed with water and other products.