Comprehensive Study Guide to Metals, Nonmetals, Alloys, and Extraction Processes
Project and Research
- Students are assigned to read from a reliable source concerning the uses of common metals and their compounds, specifically:
- Sodium ()
- Potassium ()
- Magnesium ()
- Calcium ()
- Tantalum ()
- Research findings are to be submitted to the teacher and discussed in class.
Alloys and Their Properties
- Definition of Alloys: Alloys are mixtures of two or more metals, or metals combined with nonmetals. These constituents are melted together when molten and then allowed to cool to form a solid material. The constituent elements do not separate upon solidification.
- Structural Difference (Figure 5.3):
- Pure Metal: Atoms are of uniform size. Layers of atoms can easily slide over one another when a force is applied.
- Alloy: The introduction of a second element with different-sized atoms stops the layers from sliding. This structural disruption makes sliding difficult, thereby increasing hardness and strength.
- Effects of Alloying:
- Increases hardness and strength.
- Modifies the color and melting point.
- Decreases electrical conductivity.
- Increases resistance to corrosion.
- Examples of Alloys:
- Amalgam: An alloy of mercury () combined with another metal.
- Gun metal: Composed of copper (), tin (), and zinc ().
- Solder (Fuse Metal):
- Composition: tin and lead.
- Properties: Melts at . This is significantly lower than the melting point of pure tin ().
- Usage: Used to join wires and electrical resistances.
Gold Alloys and Content Measurement
- Hardening Gold: Pure gold is very soft. It is hardened by alloying it with copper () and silver ().
- Gold Content (Carats): The quantity of gold in an alloy is expressed in carats or as a mass percent.
- Carat Definition: A carat is equal to the mass unit of gold in of the alloy.
- : Represents pure gold with no other metals.
- : Contains of pure gold by mass in of the alloy (commonly used for jewelry).
- : Contains of pure gold by mass in of the alloy.
- Calculation of Mass Percent of Gold:
- 24 Carat: (Pure gold).
- 22 Carat: (Alloy containing or ).
- 18 Carat: .
Production of Aluminum
- Abundance and Importance:
- Aluminum is the most abundant metal in the Earth's crust ( by mass).
- It is the third most abundant element overall after oxygen and silicon.
- In consumption, it ranks second globally after iron.
- Natural Occurrence: Aluminum does not occur in a free metal state. Its main minerals include:
- Bauxite ()
- Cryolite ()
- Corundum ()
- Beryl ()
- China Clay ( or )
The Hall-Héroult Process (Extraction of Aluminum)
Aluminum is extracted industrially from bauxite using the Hall-Héroult process.
- Purification of Bauxite:
- Bauxite is often contaminated with silicon dioxide (), iron oxide (), and titanium (IV) oxide ().
- The powdered ore is heated with an aqueous sodium hydroxide () solution.
- Silica conversion: (Soluble sodium silicate).
- Aluminum oxide conversion: (Soluble sodium aluminate).
- Impurities: Iron oxides and titanium (IV) oxide are unaffected by the base and are removed via filtration.
- Precipitation and Calcination:
- The solution is treated with acid: .
- Aluminum hydroxide is filtered, washed, dried, and heated strongly in a furnace (calcination):
- Electrolysis (Figure 5.4):
- Pure (alumina) is mixed with cryolite () and fluorspar.
- Role of Cryolite: Reduces the melting point of alumina from to approximately and provides a good conducting medium.
- The Cell: A steel tank with a graphite (carbon) lining serving as the cathode. Graphite rods serve as the anode.
- Electrode Reactions:
- Anode (Oxidation): (The graphite anodes gradually oxidize and must be replaced regularly).
- Cathode (Reduction): .
- Overall Reaction: .
- Molten aluminum is siphoned from the bottom of the cell.
Properties and Reactions of Aluminum
- Physical Properties:
- Soft, silvery-white, and lightweight.
- Density: .
- Melting Point: .
- Highly ductile and malleable (wires, rolls, casts).
- Excellent conductor of heat and electricity.
- Chemical Properties:
- Reaction with Oxygen: Forms a thin, protective film of aluminum oxide () that inhibits further corrosion: .
- Reaction with Nitrogen: Burns to form aluminum nitride: .
- Reaction with Acids: Reacts with dilute and to liberate hydrogen gas:
- Nitric Acid Exception: Does not react with dilute or concentrated due to the formation of a protective oxide layer. Thus, aluminum containers can transport .
- Reaction with Halogens: Burns in chlorine gas: .
- Reaction with Bases: Reacts with sodium hydroxide: .
Applications of Aluminum and Thermite Welding
- General Uses: Duralumin alloys (Al, Cu, Mg) for aircraft, ships, and automobiles; household cookware (high thermal conductivity); window frames; roofing; food packaging; power transmission lines.
- Thermite Welding:
- Used for welding rails, propeller shafts, and heavy machinery parts.
- The Process: Powdered aluminum mixed with iron (III) oxide () is ignited, reaching temperatures of .
- Equation: .
- Thermite Mixture: The specific mixture of powdered and .
- Other applications: Used to isolate other metals like chromium: .
Production of Iron in the Blast Furnace
- Iron Ores:
- Hematite () - Chief ore.
- Magnetite ().
- Siderite ().
- Limonite ().
- Iron Pyrites (), known as "fool's gold."
- Raw Materials for Extraction: Iron ore, coke (fuel and reducing agent), limestone (flux), and hot air.
- Process (Figure 5.5):
- Oxidation of Coke: ( near the bottom).
- Reduction to Carbon Monoxide: .
- Reduction of Iron Oxides:
- Limestone Decomposition and Slag Formation:
- Flux reaction: .
- Scavenging silica (sand) impurity: .
- Slag: Molten calcium silicate is lighter than molten iron and floats on top. It is used in cement manufacturing.
Types of Iron and Steel Making
- Pig Iron (Crude Iron): Obtained directly from the blast furnace. Contains iron, carbon, and smaller amounts of silicon (), phosphorus (), manganese, and sulfur. It is very brittle.
- Cast Iron: Formed by re-melting pig iron with scrap iron and casting into molds.
- Wrought Iron: The purest commercial form ( iron). Tough, malleable, and ductile. Made by heating impure iron with hematite and limestone.
- Steel Making (Purification): The process of removing excess carbon and impurities through oxidation at high temperatures.
- Techniques:
- Bessemer Converter: Molten pig iron is placed in a vessel with a magnesium and calcium carbonate lining. Hot air is blown through holes in the bottom. Takes only but quality is variable and difficult to control.
- Open-hearth Furnace: Large shallow hearth lined with and . Charged with pig iron, , scrap iron, and limestone. Impurities like carbon and sulfur bubble out as gases (, ). Takes ; quality is better controlled.
- Basic Oxygen Process: Powdered and oxygen gas are forced onto the surface of molten pig iron via an oxygen lance. Highly exothermic. Takes . This has largely replaced the open-hearth method.
- Tempering: A process of heating and controlled cooling to achieve desired hardness. Removes cementite (), which otherwise reduces steel hardness.
Physical and Chemical Properties of Iron
- Physical Properties:
- Gray, lustrous, malleable, and ductile.
- Density: .
- Melting Point: .
- Ferromagnetic: Can be permanently magnetized.
- Chemical Properties:
- Rusting: Occurs in the presence of air and moisture, forming hydrated iron (III) oxide ().
- Reaction with Acids: Forms iron (II) salts and : .
- Oxidation States: Common states are (ferrous - pale green) and (ferric - yellowish brown).
- Oxidation of Hydroxides: .
- Reaction with Halogens/Sulfur:
- Displacement Reactions: Iron displaces less active metals like copper from solutions: .
Classification of Steels
| Type | % Carbon | Typical Uses |
|---|---|---|
| Mild Steel | Up to | Screws, motors, railway lines, ships, nuts, bolts |
| Medium Steel | Springs and chains | |
| High Carbon Steel | Drill bits, knives, hammers, chisels | |
| Stainless Steel | Kitchen pots, pans, food machinery, laundry machines |
- Alloy Steel: Contains higher percentages of other metals (Chromium, Nickel, Tungsten, Manganese) to provide hardness, toughness, and heat resistance.
Occurrence and Extraction of Copper
- Minerals:
- Sulphide ores: Chalcopyrite (), Chalcocite (), Covellite (), Bornite ().
- Oxide ores: Cuprite (), Tenorite ().
- Carbonate ores: Malachite ().
- Extraction Process (from Chalcopyrite):
- Concentration: Crushed ore is concentrated by froth flotation, increasing copper content from to .
- Roasting: .
- Smelting: Limestone and sand () are added to remove iron oxide and silica as slag:
- Reduction: The obtained is heated with a limited oxygen supply to produce copper: .
Questions & Discussion
Activity 5.2 (Aluminum)
- Question: What properties of aluminum make it useful for packaging cigarettes and medicines?
- Response: Malleability (can be rolled into thin foil) and resistance to corrosion.
- Question: Why are steel-cored aluminum cables used for high-voltage electricity?
- Response: Aluminum is a good conductor and lightweight; the steel core provides structural strength to prevent the cable from sagging or breaking over long distances.
- Question: Materials in your home made of aluminum?
- Response: Cans, foil, pots, window frames; noted for light weight, lack of rusting, and ease of shaping.
Activity 5.3 (Aluminum Reactivity/Cooking)
- Question: Why should food containing iron salts not be cooked in aluminum utensils?
- Response: Due to displacement reactions where the more reactive aluminum might displace iron.
- Question: Aluminum is highly reactive, yet used for utensils. Why?
- Response: The instantaneous formation of a thin, protective layer of prevents further reaction with food or water.
Activity 5.5 (Blast Furnace)
- Question: Explain the principle of the blast furnace.
- Response: It uses counter-current reduction where rising gas reduces descending iron ore while limestone removes impurities as slag.
- Question: Why is calcium carbonate used?
- Response: To act as a flux that reacts with acidic impurities (like sand) to form slag.
Activity 5.6 (Iron/Steel)
- Question: Which form of iron is the purest?
- Response: Wrought iron ( iron).