Cardiac Ion Channels Lecture
Introduction to Cardiac Ion Channels
- Overview of Presentation
- Focus on cardiac ion channels
- Learning objectives provided (specific details not elaborated here)
Equilibrium Potential
- Definition
- Equilibrium potential for an ion, denoted as Eeqx, represents the membrane potential where the inward flow of the ion equals its outward flow.
- This potential is where the diffusional gradient (concentration gradient) balances the electrical gradient.
- Calculation via Nernst Equation
- The equilibrium potential is determined by the intracellular and extracellular concentrations of the ion as described in the Nernst equation:
E<em>eqx=zFRTimesextln[Ion]in[Ion]</em>out
- Where:
- R = universal gas constant
- T = absolute temperature in Kelvin
- z = valence of the ion
- F = Faraday's constant
Concentration Differences in Key Ions for Cardiac Cells
- Potassium (K+)
- High intracellular concentration promotes efflux (flow out of the cell).
- Electrical potential favors influx (flow into the cell).
- Sodium (Na+)
- High extracellular concentration causes sodium ions to flow into the cell (influx).
- Electrical potential favors efflux (flow out of the cell).
- Calcium (Ca2+)
- Significant difference with concentrations of 2 mmol/L outside and 0.001 mmol/L inside.
- Key Concentrations in Cardiac Cells
- Sodium: 250 mmol/L (outside), 15 mmol/L (inside)
- Potassium: 5 mmol/L (outside), 150 mmol/L (inside)
- Calcium: 2 mmol/L (outside), 0.001 mmol/L (inside)
Classes and Subtypes of Ion Channels
- Ion Channels Explanation
- Ions, being charged species, usually cannot cross the lipid bilayer of the cell membrane without the aid of specialized proteins known as ion channels.
- Opening these channels allows ions to move across the membrane down their concentration gradients.
- Specificity of Ion Channels
- Most ion channels are specific to one ion, while some (mixed conductance channels) allow multiple ions to pass.
- Importance
- Electrical properties of tissues depend on the types of ion channels expressed in a cell's membrane.
Membrane Excitation in Cardiac Muscle
- Main Channels
- Sodium, potassium, and calcium channels play crucial roles in cardiac muscle excitation.
- Mixed Conductance Channels
- When multiple ions can pass through a channel, the reversal potential reflects their relative permeabilities.
- Example of Reversal Potential Calculation
- For a channel with equal conductance for sodium (E<em>Na=+60 mV) and potassium (E</em>K=−90 mV):
- Reversal potential equation:
E<em>rev=0.5imesE</em>Na+0.5imesEK=0.5imes60+0.5imes(−90)=−15extmV
Sodium Ion Channels
- Characteristics
- Large inward electrochemical gradient for sodium.
- Open when membrane potential reaches around -70 mV (fast voltage-gated sodium channels).
- Depolarization Process
- Sodium influx causes the interior of the cell to become more positive (depolarization).
Potassium Ion Channels
- Characteristics
- Potassium channels primarily facilitate outward flow, leading to hyperpolarization or repolarization of the cell.
- Types of Potassium Channels 1. Inward Rectifier Potassium Channel (KIR)
- Background potassium channel maintaining resting potential near -90 mV.
- Transient Outward Potassium Channel (ITO)
- Rapidly opens during depolarization and closes quickly; creates transient repolarizing force.
- Delayed Rectifier Potassium Currents (IKR and IKS)
- Closed at negative voltages; open when the membrane potential becomes more positive.
- IKR has a faster inactivation rate than IKS, making IKR more significant in repolarizing action potentials.
Calcium Ion Channels
- Types of Calcium Channels
- T-Type Calcium Channels
- Tiny conductance; transient openings found in pacemaker and atrial cells. Open at around -55 mV.
- L-Type Calcium Channels
- Large conductance and long-lasting; found throughout cardiac tissues, especially in ventricular myocytes. Open at -40 mV and activate more slowly than T-type channels.
- Calcium Influx
- Calcium entry depolarizes the cell due to the positive charge.
Mixed Conductance Channels
- Fun Currents (IF)
- Activated by hyperpolarization (unlike most currents activated by depolarization).
- Found in neural and pacemaker cells and permeable to both sodium and potassium.
- Their reversal potential is around -20 mV, reflecting contributions from both sodium and potassium currents.
Cardiac Conduction System
- Overview
- The heart exhibits pacemaker activity, allowing it to beat independently of the nervous system.
- SA Node
- Initiates action potential at 60-100 beats per minute.
- Action potential spreads throughout the atria at approximately 1 m/s due to electrical coupling.
- AV Node
- Slower conduction at 0.5 m/s, introducing delay (~100 ms) between atrial and ventricular excitation for effective filling of ventricles.
- Propagation of Action Potential
- Spreads from AV node through the bundle of His and down to the ventricular walls via Purkinje fibers to activate the cardiac muscle.
Intrinsic Firing Rates
- Firing Rates for Pacemaker Cells
- SA Node: 60-100 beats per minute (dominant pacemaker).
- AV Node: 40-60 beats per minute (backup pacemaker).
- Purkinje Fibers: 20-40 beats per minute (last resort pacemaker).
- Overdrive Suppression
- The rapid firing of the SA node suppresses other pacemakers' intrinsic rates.
Summary of Key Concepts
- Ion channels are specialized proteins crucial for ion movement across membranes.
- Sodium influx leads to depolarization, while potassium efflux results in repolarization.
- Calcium channels (T-type and L-type) play significant roles in cardiac muscle function.
- Cardiac conduction relies on pacemaker cells (SA node, AV node, and Purkinje fibers) and their intrinsic activities are regulated by overdrive suppression.
- Overall, these mechanisms ensure rhythmic cardiac activity and proper blood flow dynamics.