Comprehensive Study Guide: Dispersion, Histograms, Skewness, Kurtosis, and Quantiles
Measures of Dispersion & Variability
Review of Foundational Summary Measures:
- Range: Difference between the largest and smallest values in a dataset.
- Interquartile Range (): Difference between the percentile () and percentile ():
- Variance ( or ): Sum of squared deviations divided by population size () or sample size minus one ():
- Standard Deviation ( or ): Square root of the variance:
- Z-scores: Number of standard deviations an observation lies away from the mean:
Coefficient of Variation (CV):
- Definition: Relative measure of dispersion that quantifies the spread of data as a proportion or percentage of its mean.
- Formulas:
- Properties:
- is a dimensionless (unitless) number.
- It enables comparison of variation across populations with different units or vastly different means.
- Applications:
- Characterizing spatial or temporal variability of geographic, climatic, or biophysical variables (e.g., precipitation, temperature, leaf area index [LAI], biomass, NDVI).
- Xiao & Moody (2004) analyzed 1990–2000 data relating the of NDVI to the of temperature and of precipitation.
- Comparative Case Study (Chapel Hill vs. Bend):

- Chapel Hill (Location A):
- Mean ():
- Standard Deviation ():
- Coefficient of Variation (): ()
- Bend (Location B):
- Mean ():
- Standard Deviation ():
- Coefficient of Variation (): ()
- Key Insight: Although Chapel Hill has a higher absolute standard deviation (), Bend exhibits significantly greater relative variability relative to its mean ().
Frequency Distributions and Histograms
Core Concepts:
- Frequency: Number of times a variable assumes a specific value or falls into a defined range.
- Frequency Distribution: Complete representation of all possible variable values and their corresponding frequencies (e.g., rolling a pair of dice multiple times yields values constrained between and with specific occurrence counts).
- Absolute Frequency: Actual raw count of occurrences.
- Relative Frequency: Normalized frequencies obtained by dividing absolute frequency by total observations (), yielding values in or percentages. Relative frequencies permit direct comparison of distributions drawn from sources with different sample sizes.
Histograms:
- Definition: Vertical bar graph used to graphically summarize the distribution of a continuous dataset.
- Structure: Range of data values is divided into intervals (classes). A bar is placed over each interval with height equal to class frequency or relative frequency.
- Midpoints: Commonly marked on the horizontal axis.
Step-by-Step Procedure for Constructing a Histogram:
- Ungrouped Frequency Table: Count occurrences of each individual value from lowest to highest.
- Example (Topographic Moisture Index - TMI):
- TMI Value : Ungrouped Frequency =
- TMI Value : Ungrouped Frequency =
- TMI Value : Ungrouped Frequency =
- …
- TMI Value : Ungrouped Frequency =
- Grouped Frequency Table: Group observations into a manageable number of discrete class intervals.
- Example Class Intervals and Frequencies:
- Class : Frequency =
- Class : Frequency =
- Class : Frequency =
- Class : Frequency =
- Class : Frequency =
- Class : Frequency =
- Class : Frequency =
- Class : Frequency =
- Class : Frequency =
- Class : Frequency =
- Plot Frequencies: Render vertical bars for each class interval.

Field Example (Crown Width Histogram):
- Koukoulas & Blackburn (2005) measured Quercus robur crown width in situ in Frame Wood (, mean , ).

- Koukoulas & Blackburn (2005) measured Quercus robur crown width in situ in Frame Wood (, mean , ).
Statistical Moments of a Distribution
- Measures of central tendency and dispersion quantify location and spread, but do not describe distribution shape. Statistical moments formally describe distribution characteristics:
- Moment (Mean, or ): Measures central value / location.
- Moment (Variance, or ): Measures dispersion / scale.
- Moment (Skewness): Measures asymmetry.
- Moment (Kurtosis): Measures relative peakedness and tail weight.
Skewness
Definition: Quantitative measure of symmetry, or lack of symmetry, of a data distribution around its mean.
Types of Skewness:
- Symmetric Distribution:
- Skewness .
- Left and right sides of the distribution are mirror images around the mean.
- Mean Median Mode.
- Positive Skewness (Skewed Right):
- Skewness
- Long right tail relative to left tail.
- Majority of observations lie below the mean.
- Mean Median.
- Prevalent in lower-bounded variables (e.g., failure times in reliability studies, where values cannot be negative).
- Negative Skewness (Skewed Left):
- Skewness
- Long left tail relative to right tail.
- Small number of low observations and large cluster of high observations.
- Median Mean.


Formulas for Skewness:
- Population / Moment-Based Skewness Formula: where:
- Unadjusted Sample Skewness ():
- Adjusted Sample Skewness (, Joanes and Gill Formula):
Step-by-Step Worked Calculation for Sample Skewness:
- Data Table ():
- Class Mark , Frequency :
- Class Mark , Frequency :
- Class Mark , Frequency :
- Class Mark , Frequency :
- Class Mark , Frequency :
- Totals & Moments:
- Unadjusted Skewness ():
- Sample Skewness ():
Kurtosis
Definition: Quantitative measure of whether data are peaked or flat relative to a normal distribution, heavily determined by tail behavior and tail heaviness.
Standard Normal Distribution Baseline:
- Unadjusted Kurtosis
- Excess Kurtosis
Classifications of Kurtosis:


- Mesokurtic:
- Normal distribution baseline (, ).
- Leptokurtic:
- Positive excess kurtosis (, ).
- Sharper peak near mean, rapid frequency decline, long/heavy tails.
- Platykurtic:
- Negative excess kurtosis (, ).
- Flat top near mean, broader frequency spread, short/light tails (extreme case: uniform distribution).
Formulas for Kurtosis:
- Population Moment Formula:
- Ratio of Moments (): where:
- Unadjusted Excess Kurtosis ():
- Adjusted Sample Excess Kurtosis (, Joanes and Gill Formula):
Graphical Summaries: Histograms vs. Box Plots
Summary Capability Comparison:
- Histogram: Shows center (location), spread (scale), skewness, kurtosis, presence of outliers, and multi-modality.
- Box Plot: Provides a concise graphical summary of the Five-Number Summary and identifies potential outliers.
Five-Number Summary Components:
- Minimum ()
- Percentile ( / First Quartile)
- Median ( / Percentile / Second Quartile)
- Percentile ( / Third Quartile)
- Maximum ()

- Worked Examples for Box Plots:
- Example 1: Commodore Prices (in , ):
- Raw Unsorted Data:
- Ranked Data:
- Median (): ( observation, 4 values on each side).
- Percentile (): (median of the 4 smallest values).
- Percentile (): (median of the 4 largest values).
- Interquartile Range ():
- Example 2: Commuting Times (in minutes, ):
- Ranked Data:
- Percentile Position:
- Percentile Position:
- Interquartile Range ():
Measures of Non-Central Location
Quantiles that partition ordered datasets into specific equal parts: Quartiles, Deciles, Percentiles.
Quartiles ():
- Splits ordered data into 4 equal parts.
- (First Quartile): of observations are smaller, are larger.
- (Second Quartile): of observations are smaller, are larger (equal to Median).
- (Third Quartile): of observations are smaller, are larger.
- Ungrouped Data Example ():
- Ordered Data:
- ( observation)
- ( observation / observation from bottom)
- Grouped Data Formula for Quartiles: where:
Deciles ():
- Splits ordered data into 10 equal parts (9 decile points, to ).
- Grouped Data Formula for Deciles:
Percentiles ():
- Splits ordered data into 100 equal parts (99 percentile points, to ).
- Grouped Data Formula for Percentiles:
Comprehensive Grouped Data Worked Examples (Algebra Student Scores, Table 4, Total ):
- Distribution Table:
- Class : , ,
- Class : , ,
- Class : , ,
- Class : , ,
- Class : , ,
- Class : , ,
- Class : , ,
- Class : , ,
- Calculation of :
- Position:
- Class: (, , , ) (Note: Nominally recorded in text as ).
- Calculation of :
- Position:
- Class: (, , , )
- Calculation of :
- Position:
- Class: (, , , )
- Calculation of Decile :
- Position:
- Class: (, , , )
- Calculation of Percentile :
- Position:
- Class: (, , , )
Equivalence Principle:
Other Descriptive Summary Measures
Ratios:
- Relates the number of observations in category A to category B:
- Example: overcast days, mostly cloudy days .
Proportions:
- Relates one specific category to the total number of observations ():
- The sum of all category proportions equals .
- Example: Marble box containing 4 yellow, 6 red, 5 blue, and 2 green (). Yellow proportion . Enables baseline comparisons with other samples (e.g., a box with 2 yellow out of 23 marbles ).
Percentages:
- Calculated as .
- Example: .
- Usage should generally be restricted to larger sample sizes (e.g., ).
Location Quotients (LQ):
- Index measuring relative spatial concentration by comparing a subregion's share of a specific phenomenon to its share of total base area or population:
- Worked Example (Influenza Outbreak in Region with 600 Total Cases):
- Subregion A (, 150 cases):
- Area Proportion
- Case Proportion
- Location Quotient
- Subregion B (, 100 cases):
- Area Proportion
- Case Proportion
- Location Quotient
- Subregion C (, 350 cases):
- Area Proportion
- Case Proportion
- Location Quotient