1301 Spring 2025 Final Exam Study Guide
Chapter 1
Negative vs. Positive Feedback Loops: Understand the difference between negative and positive feedback loops with examples.
Isolines:
Definition: Lines on a map that connect points of equal value.
Topographic Map: Called contour lines.
Surface Weather Map: Examples include isobars (lines of equal pressure) and isotherms (lines of equal temperature).
Active vs. Passive Remote Sensing Systems:
Active: Emit their own energy and then measure the energy reflected back (e.g., radar).
Passive: Rely on naturally emitted or reflected energy (e.g., satellite images).
Chapter 2
Insolation: Incoming solar radiation.
Earth's Shape & Insolation Distribution: Explain how the Earth's spherical shape causes uneven distribution of insolation, leading to variations in temperature and climate zones.
Latent Heat:
Water Vapor to Liquid Water (Condensation): Latent heat is released to the environment. Surrounding environment warms.
Liquid Water to Water Vapor (Evaporation): Latent heat is absorbed from the environment. Surrounding environment cools.
Chapter 3
Four Forces Determining Wind Speed & Direction:
Pressure Gradient Force: Air flows from high to low pressure.
Coriolis Force: Deflects wind to the right in the Northern Hemisphere and to the left in the Southern Hemisphere.
Friction: Slows down wind speed near the surface.
Gravity: Vertical component of the air flow
Hadley Cells:
Location: Near the equator.
Rising Air: At the Intertropical Convergence Zone (ITCZ), air rises due to convergence and intense solar heating, leading to cloud formation and precipitation.
Sinking Air: At around 30° latitude, air sinks, creating subtropical high-pressure systems.
Subtropical High-Pressure Systems:
Latitude: Located at approximately 30° latitude.
Climate Characteristics: Associated with clear skies, dry conditions, and deserts.
Chapter 4
Relative Humidity:
Definition: The amount of water vapor in the air, expressed as a percentage of the maximum amount that the air could hold at a given temperature.
Change with Temperature: Relative humidity typically decreases as temperature increases during the day and increases as temperature decreases at night.
Adiabatic Processes:
Definition: Changes in temperature due to the expansion or compression of air.
Unsaturated Air:
As air ascends, it expands and cools at the dry adiabatic lapse rate (~ ).
As air descends, it compresses and warms at the dry adiabatic lapse rate (~ ).
Saturated Air:
As air ascends and becomes saturated (reaches its dew point), it cools at the saturated adiabatic lapse rate (which is variable, but generally ~ ).
As air descends, it warms at the dry adiabatic lapse rate (~ ) until it is no longer saturated.
Lifting Condensation Level (LCL):
Definition: The altitude at which a rising parcel of air becomes saturated and condensation begins.
Identification: It's the height at which clouds start to form.
Atmospheric Lifting Mechanisms:
Orographic Lifting: Air is forced to rise over a mountain range.
Windward Side: Air rises, cools, and may precipitate.
Leeward Side: Air descends, warms, and dries (rain shadow effect).
Frontal Lifting (Convergence): Occurs when air masses collide, forcing air to rise along the frontal boundary. This is connected to Midlatitude Cyclones.
Convectional Lifting: Air rises due to localized heating of the Earth's surface.
Convergence: Air converges into a low-pressure zone and subsequently rises.
Chapter 5
Air Masses:
Classification: Based on temperature and moisture content.
Temperature: Arctic (A), Polar (P), Tropical (T)
Moisture: Maritime (m), Continental (c)
Characteristics & Origin:
mT (maritime Tropical): Warm, moist; originates over tropical oceans.
cT (continental Tropical): Hot, dry; originates over deserts.
mP (maritime Polar): Cold, moist; originates over high-latitude oceans.
cP (continental Polar): Cold, dry; originates over high-latitude landmasses.
Midlatitude Cyclones:
Definition: Large-scale weather systems characterized by low pressure at their center and fronts extending outwards.
Characteristics: Convergence, uplift, and fronts (warm and cold).
Pressure: Characterized by low pressure at the center.
Requirements: 1. Low pressure 2. Convergence 3. Upper-level divergence
Tropical Storms:
Stages of Development:
Easterly Waves: Troughs of low pressure that move westward across the tropics.
Eastern Side of Trough (Left): Convergence, uplift, and precipitation.
Western Side of Trough (Right): Subsidence and fair weather.
Sustaining Hurricane Growth:
Warm ocean temperatures (at least or ).
Low vertical wind shear.
Moist air in the mid-troposphere.
Chapter 7
Climate vs. Weather:
Weather: Short-term atmospheric conditions.
Climate: Long-term average of weather patterns.
Köppen Climate Classification:
Definition: A system for classifying climates based on temperature and precipitation.
Purpose: To provide a standardized way to describe and map climate zones.
Climate Types:
Arid (B): Dry climates; caused by subtropical high-pressure systems and rain shadows.
Temperate Midlatitude (C): Moderate temperatures and precipitation; influenced by fronts and midlatitude cyclones.
Modern vs. Proxy Data:
Modern Data: Direct measurements (e.g., temperature from thermometers, precipitation from rain gauges).
Benefits: Direct, accurate measurements.
Limitations: Limited historical record.
Proxy Data: Indirect measurements (e.g., tree rings, ice cores, pollen).
Benefits: Provides historical climate information.
Limitations: Less precise, requires interpretation.
Chapter 17
Biotic vs. Abiotic:
Biotic: Living components of an ecosystem (e.g., plants, animals, bacteria).
Abiotic: Non-living components of an ecosystem (e.g., water, soil, air, sunlight).
K-selected vs. r-selected Species:
K-selected: Species that produce few offspring and invest heavily in their care (e.g., elephants, humans).
r-selected: Species that produce many offspring with little parental care (e.g., insects, bacteria).
Carrying Capacity:
Definition: The maximum population size that an environment can sustain given available resources.
Boom or Bust Cycle:
Definition: A pattern of population growth characterized by rapid growth (boom) followed by a sudden collapse (bust) due to exceeding carrying capacity.
Chapter 10
Plate Boundaries:
Convergent: Plates collide.
Landforms: Mountain ranges (e.g., Andes, Himalayas), volcanoes, and trenches.
Divergent: Plates move apart.
Landforms: Mid-ocean ridges, rift valleys.
Transform: Plates slide past each other.
Landforms: Fault lines (e.g., San Andreas Fault).
Driving Forces of Plate Tectonics:
Slab Pull: The force exerted by the weight of a subducting plate pulling the rest of the plate along.
Ridge Push: The force exerted by the elevated mid-ocean ridge pushing adjacent plates away.
Convection: The transfer of heat by the physical movement of currents (mantle convection).
Chapter 11
Volcanoes:
Low vs. High Viscosity Magma:
Low Viscosity: Flows easily (e.g., basaltic magma).
High Viscosity: Flows slowly or not at all (e.g., rhyolitic magma).
Viscosity & Eruption Style:
Low Viscosity: Effusive eruptions (lava flows).
High Viscosity: Explosive eruptions (pyroclastic flows).
Viscosity & Gases in Magma:
Low Viscosity: Gases escape easily.
High Viscosity: Gases are trapped, leading to explosive eruptions.
Composite Volcano (Stratovolcano):
Characteristics: Steep-sided, alternating layers of lava and ash.
Formation: Formed by repeated explosive eruptions of viscous magma.
Magma Viscosity: High.
Shield Volcano:
Characteristics: Broad, gently sloping sides.
Eruptions: Effusive eruptions of low-viscosity lava.
Magma Viscosity: Low.
Deformation & Faults:
Normal Fault: Caused by tensional stress; the hanging wall moves down relative to the footwall.
Reverse Fault: Caused by compressional stress; the hanging wall moves up relative to the footwall.
Strike-Slip Fault: Caused by shear stress; plates slide horizontally past each other.
Earthquakes:
Subduction & Earthquakes: Subduction causes earthquakes as one plate is forced beneath another, leading to stress buildup and release.
Earthquakes & Tsunamis: Earthquakes on the ocean floor can cause tsunamis by displacing large volumes of water.
Earthquake Location & Depth:
Shallow Earthquakes: Occur at divergent and transform boundaries.
Intermediate and Deep Earthquakes: Occur at subduction zones.
Chapter 12
Weathering:
Physical Weathering: Mechanical breakdown of rocks.
Examples: Frost wedging, abrasion, thermal expansion.
Chemical Weathering: Chemical alteration of rocks.
Examples: Dissolution, oxidation, hydrolysis.
Karst Landscapes:
Definition: Landscapes formed from the dissolution of soluble rocks such as limestone.
Features: Sinkholes, caves, underground streams.
Formation: Formed by chemical weathering (dissolution) of limestone by slightly acidic water.
Angle of Repose:
Definition: The steepest angle at which a slope of loose material is stable.
Exceeding Angle of Repose: If a slope exceeds its angle of repose, slope failure (mass wasting) will occur.
Slope Failures (Mass Wasting):
Creep: Slow, gradual downslope movement of soil and regolith.
Slump: Downward sliding of a mass of rock or unconsolidated material along a curved surface.
Debris Flow: Rapid flow of a mixture of rock, soil, and water.
Rockslide: Rapid sliding of a mass of bedrock along a planar surface.
Chapter 13
Stream Discharge:
Definition: The volume of water flowing past a point in a stream per unit time. where is discharge, is cross-sectional area, and is velocity.
Measurement: Measured using stream gauges or calculated based on stream width, depth, and velocity.
Importance: Important for water resource management, flood prediction, and understanding stream dynamics.
Hydrographs:
Definition: Graphs that show the discharge of a stream over time.
Information: They show how streamflow changes in response to precipitation events and other factors.
Floods:
Definition: An overflow of water that submerges land that is normally dry.
Graphing Flood Flows: Hydrographs show a sharp peak in discharge during a flood event.
Flash Flood Hydrograph: Characterized by a rapid rise and fall in discharge.
1993 Mississippi River Flood:
Cause: Prolonged heavy rainfall over a large area of the Mississippi River basin.