Protectionism and free trade
Protectionism: refers to government policies and regulations (such as restrictive
quotas and tariffs on imported goods), which are designed to benefit local
producers of goods and services in their competition with imported goods, thus
helping them to survive.
Free trade: occurs where government creates very few barriers to international trade. This allows the free flow of goods and services into the country from any other country that can produce these goods cheaper, better, or in the required volumes.
Export promotion
Definition
Export promotion involves providing incentives to encourage local
businesses to produce goods for export.
Reasons for export promotion
Some of the reasons for export promotion are:
•The country achieves significant export-led economic growth.
•Export promotion enlarges the production capacity of the country.
•Export markets are much bigger than local markets.
•More workers will be employed.
•Prices will be reduced.
Methods of export promotion
Methods used to support export promotion include:
• Incentives: The government supplies information on export markets,
research on new markets, concessions on transport charges, export
credit, etc. in order to stimulate exports.
• Subsidies: These include direct and indirect subsidies:
– Direct subsidies: Cash payments to exporters.
– Indirect subsidies: Refunds on import tariffs and general tax
rebates.
• Trade neutrality: Subsidies equal in size to import duties, are paid.
Neutrality can be achieved through trade liberalisation.
Advantages of export promotion
The advantages of export promotion include:
•There are no limitations to size and scale of market.
•Production is based on cost and efficiency.
•There is increased domestic production.
•Exchange rates would be realistic.
Disadvantages of export promotion
The disadvantages of export promotion include:
•The real cost of production is reduced by subsidies and incentives.
•Incentives and subsidies reduce prices and force competitors out of
the market. This leads to a lack of competition.
•Export promotion results in increased tariffs and quotas by powerful
overseas competitors.
•Export promotion results in the protection of labour-intensive
industries by developed countries.
Import Substitution
Definition
Import substitution is part of South Africa’s international trade policy. It
occurs when locally produced goods replace goods that had previously
been imported. This has a positive impact on the balance of trade.
Reasons for import substitution
Reasons for import substitution include the following:
• Diversification: when goods that were previously imported are
produced locally domestic manufacturing expands and an economy
becomes less reliant on foreign countries.
• Industrialisation is promoted: the development of new industries to
produce previously imported goods can increase tax revenues and
create jobs.
• Balance of payment problems: if the deficit on the BoP is too high,
a decrease in imports can help to rectify this.
• Trade: developing countries’ reliance on natural resources as a
basis for growth and development limits their ability to grow. If these
resources are used to produce goods and services which can be
used domestically or exported, economic growth might be increased.
Methods of import substitution
The government imposes certain measures to restrict the amount of
imports into the country and to support local industries. Restrictive
measures used to reserve the domestic market for local manufacturers
are:
Tariffs: Customs duties or import duties are taxes on imported goods.
They can be ad valorem (based on the value) or specific to certain
goods. Prices of imported goods increase for domestic consumers,
and they tend to shift demand from imports to domestic products
(goods).
Quotas: Limits are put on the supply of goods and services. Supply
is reduced and prices rise. Foreign enterprises benefit if demand for
their products remains high.
Subsidies: They enable relatively high cost domestic enterprises to
undercut more efficient foreign enterprises in the domestic market.
Exchange control: Government reduces imports by limiting the
amount of foreign exchange made available to those who wish to
import.
Physical control: A complete ban or embargo is imposed on the
import of certain goods from a particular country.
Diverting trade: Monetary deposits, time-consuming customs
procedures and high-quality standards are imposed to make the
importing of goods more difficult.
Advantages of import substitution
Some of the advantages of import substitution are:
• Increased employment: More local workers are employed. This
stimulates the economy and GDP increases.
• More choice: Available foreign exchange can be used for other
imports, thus increasing choices.
• Diversification: By producing more goods locally, the range of
available goods increases, and the country becomes less vulnerable
to foreign actions and conditions.
Disadvantages of import substitution
Some of the disadvantages of import substitution for the local economy
are:
Capital and entrepreneurial talent: This is drawn away from
comparative advantage.
Technology borrowed from abroad: This may be unsuitable for local
production.
Competitiveness of certain sectors decreases: Where comparative
advantages exist.
Import substitution leads to demand for protection: This demand
comes from industries that provide inputs to local industries.
*Many economists argue for protection, especially for developing countries.
Many other economists insist that free trade is the best way to regulate
markets. Governments often choose a mix of selected protectionist and
free trade policies that suit the particular conditions of their country.
Protection
Definition of protection
A trade policy whereby the state discourages the importing of certain
goods and services in order to protect local industries against unequal
competition from abroad
Arguments in favour of protection
Industrial development: Some developing countries are well suited
to establishing certain kinds of industries. Free trade makes it
difficult for these countries to compete with countries with well-
established industries.
Infant industries: Newly established industries find it difficult to
survive because of high average costs of production which are higher
than those of well-established foreign competitors.
Stable wage levels and higher standards of living: A country with
high wages has a view that the standard of living will be undermined
if cheaper goods are imported from countries with low wages.
The protection of job opportunities: If local industries cannot find
profitable markets because of cheaper imports, production may
decrease and this will lead to more unemployment.
Economic self-sufficiency and strategic key industries: In times
of conflict, cut-off or friction between countries occurs. Protection
should be granted, especially to key industries to ensure the
availability of these key products.
Dangers of dumping: Some countries sell their surplus goods in
a foreign country at lower prices than it cost them to produce the
goods. Local producers cannot compete, and their factories may
close.
Stabilise exchange rates and balance of payments: Traders buy in
the cheapest markets and sell in the most expensive ones. Countries
export primary products and import manufactured goods, causing
disrupted balance of payments and exchange rates.
Protection of natural resources: Free trade can easily exhaust natural
resources, therefore protection is needed to protect local industries
and indigenous knowledge systems so that they can survive. The
South African government has taken steps to protect Rooibos tea as
natural resource and safeguard indigenous knowledge that allows the
hoodia plant to be used for medicinal purposes.
Free trade
Definition of free trade
When producers and consumers are free to buy goods and services from
anywhere in the world without the interference of government.
Arguments in favour of free trade
Specialisation: The theory of comparative advantage shows that
world output can be increased if countries specialise in what they
are relatively best at producing. If each nation does what it does
best, everyone will enjoy lower prices and higher levels of output.
Economies of scale: Free trade allows economies of scale to be
maximised and thus unit cost are reduced. Economies of scale are a
source of comparative advantage.
Choice: Free trade allows consumers the choice of what to buy
from the whole world, and not just what is produced domestically.
Consumers’ welfare is thus increased because some consumers at
least will prefer to buy foreign goods rather than domestic goods.
Innovations: Free trade increases competition and this encourages
innovation in goods and processes.
Improves global efficiency: Under free trade, resources are
allocated more efficiently as markets expand, because each country
specialises in its most effective production. Free trade leads to greater world production of traded goods, leading
to an increase in economic welfare. Free trade leads to mutual gains from international trade to all
countries.
A desirable mix of protection and free trade
Import substitution and export promotion
The strategies of Import substitution and export promotion should not
be regarded as unavoidable opposites. Many countries started out by
protecting their domestic industries and then applied export-orientated
policies only after a considerable length of time. Import substitution almost
inevitably leads to export promotion.
Protection and free trade
Regionalisation, in the form of trade blocks, makes use of free trade and
protection. Member countries pursue free trade with one another but
apply trade restrictions outside their block. (Free trade area, e.g. NAFTA
and Custom unions, e.g. Mercusor)
Globalisation
Restrictive practices, whether they relate to imports or to exports have the
same effect – they reduce the potential volume of world production that
would be possible if there was complete free trade and only those goods
for which countries had comparative advantage were produced. To pursue
this objective of free trade, an independent facilitator was required. The
WTO (world trade organisation) is such a facilitator.
Economic integration
Some of these trade protocols that focus on economic integration are:
Free trade areas (FTAs) – Member countries agree to the removal of
all tariffs. Each member country is still permitted to maintain its own
level of trade protection against non-member countries.
Customs unions – Member countries agree to the removal of all
tariffs. However, in a custom union, member countries all set and
maintain the same external restrictions on non-member countries.
Common markets – Are a form of economic integration that satisfies
all the requirements of a customs union but also allows for the free
movement of factors of production between member countries.
Economic unions – Meet all the requirements of a common market,
but go further which results in member countries establishing a
single authority responsible for joint economic policy making, a single
monetary system, one central bank, a unified fiscal system and a
common foreign economic policy.
Evaluation of South Africa’s trade policies
Export promotion and import substitution
South Africa’s export promotion policy unfolds as follows:
Export promotion
1970’s – measures such as cash grants, tax concessions on export
turnover and profits and rail freight concessions were introduced
in order to reduce costs for manufacturers of goods with export
potential.
1980’s – some quotas were removed and replaced with tariffs.
Export subsidies were introduced. A list of importers that needed
approval replaced a list of imports that did not need approval.
1985 – When the US banks refused to roll over import guarantees,
South Africa declared a debt standstill and unilaterally restructured
the payment of its foreign loans. The rand depreciated substantially
and surcharge of 10% on imports was introduced. This led to the
effective protection rate increase from 30% to 70%.
1990’s – the General Export Incentive Scheme (GEIS) was
introduced for the purpose of encouraging the production of value-
added exports. For the first time the official policy stance was one of
export-orientated industrialisation.
South Africa’s Import substitution policy unfolds as follows:
Import substitution
Tariff protection – in 1910 the Cullinan Commission was appointed
to investigate the feasibility of establishing a domestic manufacturing
industry in South Africa. Tariffs were introduced by the Customs
Tariff Act of 1914 and provided protection for local manufacturing
industries. In 1925 a new act was implemented and the ‘South Africa
first campaign’ was introduced. South Africa thereby introduced an
official inward-looking policy.
The Second World War – Iscor (now Arcelor Mittal) was established
as a strategic industry in 1928, in time to take advantage of the
opportunities brought about by the Second World War. The SWW
stimulated manufacturing and industrial development in general.
This was because SA was isolated from many imports and had to
produce many products itself.
Export ready – After the SWW it was accepted that import
substitution was the best policy to enhance economic growth.
Sasol was established in 1955 to produce oil from coal. From the
mid-1960’s, import substitution reached a mature phase when
manufacturing increasingly focused on intermediate and capital
production. Domestic demand was the main stimulus. However
large markets were essential for these goods and necessitated
exports. South Africa was ready for an export promotion policy. SA
manufacturing sector’s contribution to GDP increased from 5,8
in 1912 to 31,1% in 1981. Import substitution had indeed been
successful.