Exhaustive Study Notes on Chemical Reactions and Equations

Fundamentals of Chemical Reactions and Notation

A chemical reaction occurs whenever a chemical change takes place. During a chemical change, existing chemical bonds between atoms are broken and new chemical bonds are formed. The products created possess chemical properties entirely distinct from those of the original reactants. Because of this fundamental alteration in molecular structure and chemical bonding, chemical changes cannot normally be reversed by simple physical methods.

Examples of chemical changes include the burning of Liquefied Petroleum Gas (LPG), the baking of a cake, and cellular respiration. In contrast, physical changes alter only physical form or appearance without changing chemical composition; examples include the plucking of flowers, the cutting of a mango, and the breaking of a stone.

Five primary observational indicators signify that a chemical reaction has taken place:

  1. Change in physical state

  2. Change in colour

  3. Change in odour

  4. Evolution of a gas

  5. Change in temperature

Chemical transformations are systematically categorized using defined chemical terms and symbolic notations:

  • Reactants: The starting substances that undergo chemical changes during a reaction. Reactants are always written on the left-hand side (L.H.S.) of a chemical equation.

  • Products: The newly formed substances resulting from a chemical reaction. Products are always written on the right-hand side (R.H.S.) of a chemical equation.

  • Directional Arrow: The arrowhead points from reactants toward products, indicating the direction in which the chemical reaction proceeds.

  • Word Equation: A preliminary representation of a chemical reaction using the full spoken or written names of the participating substances.

  • Skeletal Equation: An unbalanced chemical equation written using chemical symbols and chemical formulas rather than full names, displaying raw reactant and product identities without balanced proportions.

  • Chemical Equation: A standardized symbolic notation using formulas, stoichiometric coefficients, and physical state indicators to represent a chemical transformation comprehensively.

The Law of Conservation of Mass and Equation Balancing

The balancing of chemical equations is strictly based on the Law of Conservation of Mass. This fundamental law asserts that mass can neither be created nor destroyed in a chemical reaction. Consequently, the total mass present in the products must be precisely equal to the total mass present in the reactants. In terms of atomic count, the total number of atoms of each individual element remains identical before and after a chemical reaction takes place.

Balancing chemical equations requires adjusting stoichiometric coefficients so that every element has an equal number of atoms on both sides of the equation. Below are key chemical reactions represented as balanced chemical equations:

  • Reaction between nitric acid and calcium hydroxide:

2HNO3+Ca(OH)2→Ca(NO3)2+2H2O2\text{HNO}_3 + \text{Ca(OH)}_2 \rightarrow \text{Ca(NO}_3)_2 + 2\text{H}_2\text{O}

  • Neutralization of sodium hydroxide with sulphuric acid:

2NaOH+H2SO4→Na2SO4+2H2O2\text{NaOH} + \text{H}_2\text{SO}_4 \rightarrow \text{Na}_2\text{SO}_4 + 2\text{H}_2\text{O}

  • Precipitation of silver chloride from sodium chloride and silver nitrate:

NaCl+AgNO3→AgCl+NaNO3\text{NaCl} + \text{AgNO}_3 \rightarrow \text{AgCl} + \text{NaNO}_3

  • Precipitation of barium sulphate from barium chloride and sulphuric acid:

BaCl2+H2SO4→BaSO4+2HCl\text{BaCl}_2 + \text{H}_2\text{SO}_4 \rightarrow \text{BaSO}_4 + 2\text{HCl}

  • Combustion of methane (natural gas):

CH4(g)+2O2(g)→CO2(g)+2H2O(g)\text{CH}_{4(g)} + 2\text{O}_{2(g)} \rightarrow \text{CO}_{2(g)} + 2\text{H}_2\text{O}_{(g)}

  • Oxidation of iron by oxygen:

4Fe(s)+3O2(g)→2Fe2O3(s)4\text{Fe}_{(s)} + 3\text{O}_{2(g)} \rightarrow 2\text{Fe}_2\text{O}_{3(s)}

  • Oxidation of sodium metal by oxygen:

4Na(s)+O2(g)→2Na2O(s)4\text{Na}_{(s)} + \text{O}_{2(g)} \rightarrow 2\text{Na}_2\text{O}_{(s)}

  • Reaction of sodium metal with gaseous water (steam):

2Na(s)+2H2O(g)→2NaOH(aq)+H2(g)2\text{Na}_{(s)} + 2\text{H}_2\text{O}_{(g)} \rightarrow 2\text{NaOH}_{(aq)} + \text{H}_{2(g)}

  • Reaction of iron metal with steam:

4Fe(s)+3H2O(g)→2Fe2O3(s)+3H2(g)4\text{Fe}_{(s)} + 3\text{H}_2\text{O}_{(g)} \rightarrow 2\text{Fe}_2\text{O}_{3(s)} + 3\text{H}_{2(g)}

  • Synthesis of ammonia from hydrogen and nitrogen gas:

3H2(g)+N2(g)→2NH3(g)3\text{H}_{2(g)} + \text{N}_{2(g)} \rightarrow 2\text{NH}_{3(g)}

  • Combustion of hydrogen sulphide gas in air:

2H2S(g)+3O2(g)→2H2O(l)+2SO2(g)2\text{H}_2\text{S}_{(g)} + 3\text{O}_{2(g)} \rightarrow 2\text{H}_2\text{O}_{(l)} + 2\text{SO}_{2(g)}

  • Reaction of aqueous barium chloride with aqueous aluminium sulphate:

3BaCl2(aq)+Al2(SO4)3(aq)→2AlCl3(aq)+3BaSO4(s)3\text{BaCl}_{2(aq)} + \text{Al}_2(\text{SO}_4)_{3(aq)} \rightarrow 2\text{AlCl}_{3(aq)} + 3\text{BaSO}_{4(s)}

  • Reaction of potassium metal with liquid water:

2K(s)+2H2O(l)→2KOH(aq)+H2(g)2\text{K}_{(s)} + 2\text{H}_2\text{O}_{(l)} \rightarrow 2\text{KOH}_{(aq)} + \text{H}_{2(g)}

  • Reaction of barium chloride solution with sodium sulphate solution:

BaCl2(aq)+Na2SO4(aq)→BaSO4(s)+2NaCl(aq)\text{BaCl}_{2(aq)} + \text{Na}_2\text{SO}_{4(aq)} \rightarrow \text{BaSO}_{4(s)} + 2\text{NaCl}_{(aq)}

  • Neutralization of aqueous sodium hydroxide with aqueous hydrochloric acid:

NaOH(aq)+HCl(aq)→NaCl(aq)+H2O(l)\text{NaOH}_{(aq)} + \text{HCl}_{(aq)} \rightarrow \text{NaCl}_{(aq)} + \text{H}_2\text{O}_{(l)}

Types of Chemical Reactions

Chemical reactions are classified into several fundamental categories based on the nature of the chemical changes occurring between reactants and products.

Combination Reactions are chemical reactions in which two or more substances (elements or compounds) combine to form a single new product. Exemplary combination reactions include:

  • Burning of magnesium metal in oxygen:

2Mg+O2→2MgO2\text{Mg} + \text{O}_2 \rightarrow 2\text{MgO}

  • Synthesis of water from hydrogen and oxygen gases:

2H2+O2→2H2O2\text{H}_2 + \text{O}_2 \rightarrow 2\text{H}_2\text{O}

  • Reaction of quicklime (calcium oxide) with carbon dioxide:

CaO+CO2→CaCO3\text{CaO} + \text{CO}_2 \rightarrow \text{CaCO}_3

  • Reaction of ammonia with sulphuric acid:

2NH3+H2SO4→(NH4)2SO42\text{NH}_3 + \text{H}_2\text{SO}_4 \rightarrow (\text{NH}_4)_2\text{SO}_4

  • Synthesis of hydrogen chloride gas:

H2(g)+Cl2(g)→2HCl(g)\text{H}_{2(g)} + \text{Cl}_{2(g)} \rightarrow 2\text{HCl}_{(g)}

Decomposition Reactions are chemical reactions in which a single compound breaks down into two or more simpler substances. Decomposition reactions require an external energy source to break chemical bonds, making them the direct opposite of combination reactions (which combine substances and release energy). Decomposition reactions are categorized according to the form of energy supplied:

  1. Thermal Decomposition (Energy supplied as Heat):
  • Thermal decomposition of calcium carbonate (limestone):

CaCO3(s)→HeatCaO(s)+CO2(g)\text{CaCO}_{3(s)} \xrightarrow{\text{Heat}} \text{CaO}_{(s)} + \text{CO}_{2(g)}

  • Thermal decomposition of lead nitrate:

2Pb(NO3)2→Heat2PbO+4NO2+O22\text{Pb(NO}_3)_2 \xrightarrow{\text{Heat}} 2\text{PbO} + 4\text{NO}_2 + \text{O}_2

  • Thermal decomposition of ferrous sulphate (green ferrous sulphate crystals lose water of crystallization and decompose):

2FeSO4→HeatFe2O3+SO2+SO32\text{FeSO}_4 \xrightarrow{\text{Heat}} \text{Fe}_2\text{O}_3 + \text{SO}_2 + \text{SO}_3

  • Thermal decomposition of zinc carbonate:

ZnCO3(s)→HeatZnO(s)+CO2(g)\text{ZnCO}_{3(s)} \xrightarrow{\text{Heat}} \text{ZnO}_{(s)} + \text{CO}_{2(g)}

  • Thermal decomposition of ammonium nitrite:

NH4NO2→2H2O+N2\text{NH}_4\text{NO}_2 \rightarrow 2\text{H}_2\text{O} + \text{N}_2

  1. Photolytic Decomposition (Energy supplied as Light / Sunlight):
  • Decomposition of silver chloride in sunlight (white silver chloride turns grey due to silver formation):

2AgCl(s)→Sunlight2Ag(s)+Cl2(g)2\text{AgCl}_{(s)} \xrightarrow{\text{Sunlight}} 2\text{Ag}_{(s)} + \text{Cl}_{2(g)}

  1. Electrolytic Decomposition (Energy supplied as Electricity):
  • Electrolysis of liquid water into hydrogen and oxygen gas:

2H2O(l)→Electricity2H2(g)+O2(g)2\text{H}_2\text{O}_{(l)} \xrightarrow{\text{Electricity}} 2\text{H}_{2(g)} + \text{O}_{2(g)}

Displacement Reactions are reactions in which a more reactive element displaces a less reactive element from its compound in aqueous solution. Key examples include:

  • Zinc displacing copper from copper sulphate solution:

CuSO4(aq)+Zn(s)→ZnSO4(aq)+Cu(s)\text{CuSO}_{4(aq)} + \text{Zn}_{(s)} \rightarrow \text{ZnSO}_{4(aq)} + \text{Cu}_{(s)}

  • Iron displacing copper from copper sulphate solution:

Fe(s)+CuSO4(aq)→FeSO4(aq)+Cu(s)\text{Fe}_{(s)} + \text{CuSO}_{4(aq)} \rightarrow \text{FeSO}_{4(aq)} + \text{Cu}_{(s)}

  • Magnesium displacing hydrogen from hydrochloric acid:

Mg(s)+2HCl(aq)→MgCl2(aq)+H2(g)\text{Mg}_{(s)} + 2\text{HCl}_{(aq)} \rightarrow \text{MgCl}_{2(aq)} + \text{H}_{2(g)}

  • Zinc displacing hydrogen from sulphuric acid:

Zn+H2SO4→ZnSO4+H2\text{Zn} + \text{H}_2\text{SO}_4 \rightarrow \text{ZnSO}_4 + \text{H}_2

  • Copper displacing silver from silver nitrate solution during silver recovery:

2AgNO3(aq)+Cu(s)→Cu(NO3)2(aq)+2Ag(s)2\text{AgNO}_{3(aq)} + \text{Cu}_{(s)} \rightarrow \text{Cu(NO}_3)_2(aq) + 2\text{Ag}_{(s)}

  • Aluminium displacing iron from iron(III) oxide:

Fe2O3+2Al→Al2O3+2Fe\text{Fe}_2\text{O}_3 + 2\text{Al} \rightarrow \text{Al}_2\text{O}_3 + 2\text{Fe}

  • Iron filings reacting with dilute hydrochloric acid:

Fe+2HCl→FeCl2+H2\text{Fe} + 2\text{HCl} \rightarrow \text{FeCl}_2 + \text{H}_2

  • Aluminium reacting with copper chloride:

2Al+3CuCl2→2AlCl3+3Cu2\text{Al} + 3\text{CuCl}_2 \rightarrow 2\text{AlCl}_3 + 3\text{Cu}

Double Displacement Reactions are reactions in which there is a mutual exchange of ions between two reactant compounds to form two new compounds. An example is the reaction between aqueous potassium bromide and aqueous barium iodide:

2KBr(aq)+BaI2(aq)→2KI(aq)+BaBr2(s)2\text{KBr}_{(aq)} + \text{BaI}_{2(aq)} \rightarrow 2\text{KI}_{(aq)} + \text{BaBr}_{2(s)}

Precipitation Reactions are chemical reactions in which an insoluble solid product, called a precipitate, is formed in aqueous solution. An example is the reaction between sodium carbonate and calcium chloride yielding calcium carbonate precipitate:

Na2CO3(aq)+CaCl2(aq)→CaCO3(s)+2NaCl(aq)\text{Na}_2\text{CO}_{3(aq)} + \text{CaCl}_{2(aq)} \rightarrow \text{CaCO}_{3(s)} + 2\text{NaCl}_{(aq)}

Exothermic and Endothermic Energetics describe heat transfers during reactions:

  • Exothermic Reactions are chemical reactions that release energy, primarily in the form of heat, alongside the formation of products. Examples include cellular respiration, the combustion of natural gas (CH4(g)+2O2(g)→CO2(g)+2H2O(g)+Energy\text{CH}_{4(g)} + 2\text{O}_{2(g)} \rightarrow \text{CO}_{2(g)} + 2\text{H}_2\text{O}_{(g)} + \text{Energy}), the burning of carbon (C+O2→CO2+Heat energy\text{C} + \text{O}_2 \rightarrow \text{CO}_2 + \text{Heat energy}), and the decomposition of vegetable matter into compost.

  • Endothermic Reactions are chemical reactions that absorb thermal energy or require an input of energy to proceed. Examples include thermal decomposition of silver chloride, sublimation of dry ice (solid carbon dioxide), dissolving ammonium chloride in water, and the thermal reaction of nitrogen with oxygen:

N2(g)+O2(g)→Heat2NO(g)\text{N}_{2(g)} + \text{O}_{2(g)} \xrightarrow{\text{Heat}} 2\text{NO}_{(g)}

Oxidation, Reduction, and Redox Reactions

Oxidation and reduction describe complementary chemical processes involving oxygen transfer or electron/hydrogen shifts:

  • Oxidation Reaction: A chemical reaction in which a substance gains oxygen or loses hydrogen.

  • Reduction Reaction: A chemical reaction in which a substance loses oxygen or gains hydrogen.

  • Oxidation-Reduction (Redox) Reaction: A chemical reaction in which one reactant undergoes oxidation while another reactant simultaneously undergoes reduction.

Detailed analyses of specific redox systems illustrate these mechanisms:

  1. Heating Metallic Copper in Air: When shiny brown element 'X' (Copper, Cu\text{Cu}) is heated in air, it reacts with oxygen to form a black-coloured compound, copper oxide (CuO\text{CuO}):

2Cu+O2→Heat2CuO2\text{Cu} + \text{O}_2 \xrightarrow{\text{Heat}} 2\text{CuO}

  1. Reduction of Copper Oxide by Hydrogen: Passing hydrogen gas over heated black copper oxide reverses the reaction to recover metallic copper and form water:

CuO(s)+H2(g)→HeatCu(s)+H2O(l)\text{CuO}_{(s)} + \text{H}_{2(g)} \xrightarrow{\text{Heat}} \text{Cu}_{(s)} + \text{H}_2\text{O}_{(l)}

In this reaction, copper oxide (CuO\text{CuO}) loses oxygen and is reduced to copper (Cu\text{Cu}), whereas hydrogen gas (H2\text{H}_2) gains oxygen and is oxidised to water (H2O\text{H}_2\text{O}).

  1. Reduction of Zinc Oxide by Carbon:

ZnO+C→Zn+CO\text{ZnO} + \text{C} \rightarrow \text{Zn} + \text{CO}

Zinc oxide (ZnO\text{ZnO}) is reduced to zinc (Zn\text{Zn}), while carbon (C\text{C}) is oxidised to carbon monoxide (CO\text{CO}).

  1. Reduction of Lead Oxide by Carbon:

2PbO+C→2Pb+CO22\text{PbO} + \text{C} \rightarrow 2\text{Pb} + \text{CO}_2

In this reaction, lead oxide (PbO\text{PbO}) is reduced to lead (Pb\text{Pb}), and carbon (C\text{C}) is oxidised to carbon dioxide (CO2\text{CO}_2). Claims that elemental lead is reduced or carbon dioxide is oxidised are incorrect; the actual starting reactants undergoing chemical change are PbO\text{PbO} (reduced) and C\text{C} (oxidised).

  1. Reaction between Sulphur Dioxide and Hydrogen Sulphide:

SO2(g)+2H2S(g)→2H2O(l)+3S(s)\text{SO}_{2(g)} + 2\text{H}_2\text{S}_{(g)} \rightarrow 2\text{H}_2\text{O}_{(l)} + 3\text{S}_{(s)}

Hydrogen sulphide (H2S\text{H}_2\text{S}) undergoes oxidation to form water and elemental sulphur, while sulphur dioxide (SO2\text{SO}_2) undergoes reduction.

  1. Reaction between Iron(III) Oxide and Aluminium:

Fe2O3+2Al→Al2O3+2Fe\text{Fe}_2\text{O}_3 + 2\text{Al} \rightarrow \text{Al}_2\text{O}_3 + 2\text{Fe}

Aluminium (Al\text{Al}) is more reactive than iron (Fe\text{Fe}) and displaces it. Al\text{Al} gains oxygen and is oxidised to Al2O3\text{Al}_2\text{O}_3, while Fe2O3\text{Fe}_2\text{O}_3 loses oxygen and is reduced to elemental iron.

Practical Applications, Observations, and Everyday Phenomena

Respiration as an Exothermic and Decomposition Process:

Respiration is classified both as an exothermic reaction and as a decomposition process. It is a decomposition process because complex glucose molecules break down into simpler molecules of carbon dioxide and water vapour. It is exothermic because the oxidation of glucose produces a large amount of heat energy to power cellular activities:

C6H12O6(aq)+6O2(aq)→6CO2(aq)+6H2O(l)+Heat energy\text{C}_6\text{H}_{12}\text{O}_{6(aq)} + 6\text{O}_{2(aq)} \rightarrow 6\text{CO}_{2(aq)} + 6\text{H}_2\text{O}_{(l)} + \text{Heat energy}

Magnesium Ribbon Pre-Treatment and Combustion:

Magnesium is a highly reactive metal. When stored, it reacts with atmospheric oxygen to form a thin, protective layer of basic magnesium oxide (MgO\text{MgO}) on its surface. To ensure proper combustion, the magnesium ribbon is thoroughly cleaned with sandpaper prior to burning. Cleaning removes this oxide layer, exposing the underlying metal directly to air. When ignited, magnesium ribbon burns with a bright, dazzling white flame to form a basic white powder of magnesium oxide (MgO\text{MgO}):

2Mg(s)+O2(g)→2MgO(s)2\text{Mg}_{(s)} + \text{O}_{2(g)} \rightarrow 2\text{MgO}_{(s)}

Substance 'X' in Whitewashing and Cement Manufacturing:

Substance 'X', used in solution for whitewashing walls, is calcium oxide (CaO\text{CaO}), commonly known as quicklime. Quicklime is also used in the industrial manufacture of cement. When calcium oxide reacts vigorously with water, it forms calcium hydroxide (Ca(OH)2\text{Ca(OH)}_2), known as slaked lime, accompanied by the evolution of heat:

CaO(s)+H2O(l)→Ca(OH)2(aq)\text{CaO}_{(s)} + \text{H}_2\text{O}_{(l)} \rightarrow \text{Ca(OH)}_{2(aq)}

Gas Volume Ratio in Water Electrolysis (Activity 1.7):

During the electrolytic decomposition of water, electric current breaks liquid water down into hydrogen gas and oxygen gas. Chemical analysis shows that water consists of hydrogen and oxygen combined in a 2:1 atomic ratio (H2O\text{H}_2\text{O}). Consequently, the volume of hydrogen gas collected in one test tube during electrolysis is double the volume of oxygen gas collected in the other test tube.

Displacement Experiments in Solution:

  • Iron Nails in Copper Sulphate Solution: When an iron nail is immersed in a blue copper sulphate solution for 20 minutes, a single displacement reaction occurs. Iron, being more reactive than copper, displaces copper from the solution. The blue solution fades as light green ferrous sulphate (FeSO4\text{FeSO}_4) forms, while the iron nail turns brownish due to the deposition of displaced copper metal:

Fe(s)+CuSO4(aq)→FeSO4(aq)+Cu(s)\text{Fe}_{(s)} + \text{CuSO}_{4(aq)} \rightarrow \text{FeSO}_{4(aq)} + \text{Cu}_{(s)}

  • Copper Coins in Silver Nitrate Solution: When a copper coin is kept in a silver nitrate solution, copper displaces silver because copper is more reactive than silver. The solution gradually turns blue due to the formation of aqueous copper nitrate (Cu(NO3)2\text{Cu(NO}_3)_2), while silver metal deposits on the coin:

Cu(s)+2AgNO3(aq)→Cu(NO3)2(aq)+2Ag(s)\text{Cu}_{(s)} + 2\text{AgNO}_{3(aq)} \rightarrow \text{Cu(NO}_3)_2(aq) + 2\text{Ag}_{(s)}

Corrosion of Metals:

Corrosion is the process where materials, usually metals, deteriorate due to chemical reactions with atmospheric agents like oxygen, moisture, and chemical pollutants. Corrosion of iron (rusting) is a severe practical problem because structural iron suffers extensive physical damage, requiring massive expenditures to replace damaged components. Rusting forms hydrated iron oxide:

4Fe+3O2+xH2O→2Fe2O3⋅xH2O4\text{Fe} + 3\text{O}_2 + x\text{H}_2\text{O} \rightarrow 2\text{Fe}_2\text{O}_3 \cdot x\text{H}_2\text{O}

Rusting of iron cannot occur in pure distilled water. Distilled water contains neither dissolved oxygen, carbon dioxide, nor electrolytes, all of which are essential catalysts for rusting. Paint is applied to iron articles to prevent rusting; paint forms a protective surface layer that cuts off direct contact between iron, moisture, and air.

Other metals exhibit specific corrosion products upon long-term atmospheric exposure:

  • Silver items develop a black surface coating of silver sulphide (Ag2S\text{Ag}_2\text{S}).

  • Copper items develop a green surface coating of basic copper carbonate (Cu2CO3(OH)2\text{Cu}_2\text{CO}_3(\text{OH})_2 or CuCO3⋅Cu(OH)2\text{CuCO}_3 \cdot \text{Cu(OH)}_2).

Rancidity and Food Preservation:

Rancidity is the process of chemical oxidation of fats and oils in food items when kept unprotected for long periods. Oxidation produces unpleasant changes in both taste and odour. For instance, the taste and smell of butter change significantly when stored for extended periods. Similarly, when consumer foods like potato chips exhibit an unpleasant smell and altered taste (as observed in Laxmi's chips), fat oxidation via rancidity is the spoiling mechanism.

To prevent rancidity, antioxidants are added to fat-containing foods to inhibit oxidation. Snack manufacturers flush bags of chips with nitrogen gas before sealing. Nitrogen is an inert gas that displaces reactive atmospheric oxygen, preventing fat oxidation and keeping the food fresh.