Chapter 14: Semiconductor Electronics Study Notes
Chapter 14: Semiconductor Electronics
Introduction
This chapter covers Semiconductor Electronics, focusing on materials, devices, and simple circuits.
Classification of Materials
Classification Based on Conductivity
Conductivity and Resistivity: Definition
Conductivity (): Measure of a material's ability to conduct electric current.
Resistivity (): Measure of how strongly a material opposes the flow of electric current. The relationship is given by:
Types of Materials:
Metals
Definition: Materials with very low resistivity (or high conductivity).
Range of Resistivity:
Conductivity Range:
Semiconductors
Definition: Materials with conductivity intermediate between metals and insulators.
Range of Resistivity:
Conductivity Range:
Insulators
Definition: Materials with high resistivity (or low conductivity).
Range of Resistivity:
Conductivity Range:
Energy Band Diagrams
Concept of Energy Bands
Energy Bands: The grouping of different energy levels exhibited by electrons within a solid material.
Key Bands:
Valence Band
Contains valence electrons that have varying energy levels.
Definition: The highest occupied energy level.
Conduction Band
Valence electrons that are not tightly held and can leave the outermost orbit, contributing to current conduction.
Definition: Band formed by free electrons that can move to conduct electricity.
Energy Gap (Band Gap)
Definition: The energy difference between the valence band and conduction band, which determines the electromagnetic energy needed for an electron to jump from the valence band to the conduction band.
Importance: A critical factor in determining whether a material is a conductor, semiconductor, or insulator.
Energy Band Diagrams for Different Materials:
Metals: There is an overlapping of the conduction and valence bands ().
Examples: Cu, Ag, Al
Insulators: Large energy gap , no free movement of electrons.
Examples: Rubber, wood, plastic
Semiconductors: Small energy gap, do not conduct at low temperatures but do at higher temperatures.
Types of Semiconductors
Based on Purity
Intrinsic Semiconductors
Definition: Pure semiconductors without any significant dopants.
Examples: Germanium (Ge), Silicon (Si)
Charge Carriers: The number of electrons equals the number of holes.
Lattice Charge: Net charge on the lattice equals zero.
Conductivity: Low at room temperature.
Energy Band Gap for Intrinsic Semiconductors
For Germanium ():
For Silicon ():
Extrinsic Semiconductors
Definition: Doped semiconductors with impurities added to change electrical properties.
Types:
p-type Semiconductors: Formed by adding trivalent impurity (acceptor type). Majority carriers are holes.
n-type Semiconductors: Formed by adding pentavalent impurity (donor type). Majority carriers are electrons.
Doping Process
Definition: The process of adding impurities to pure semiconductors to modify their conductivity.
Majority Carrier: Refers to the charge carrier in greater number within a semiconductor.
P-n Junction Diode
Formation of P-n Junction
Definition: A junction created from the contact of p-type and n-type semiconductors.
Depletion Region: An area around the p-n junction where charge carriers are depleted, leading to a region void of free charge carriers.
Characteristics of P-n Junction Diodes:
Width of Depletion Region: Approximately .
Barrier Potential: The potential difference that prevents further diffusion of majority charge carriers from both sides of the junction, typically around for Ge and for Si.
Biasing of P-n Junction Diodes
Forward Biasing
Connects positive battery to p-side and negative to n-side, reducing the depletion region.
Exceeding the barrier potential allows current to flow.
Current increases exponentially after crossing the barrier potential.
Case I: If applied voltage , the diode does not conduct.
Case II: If applied voltage , the diode conducts.
Reverse Biasing
Connects negative battery to p-side and positive to n-side.
Increases depletion width, making current flow difficult except for a small leakage current.
V-I Characteristics of a P-n Junction Diode
The curve showing the relationship between voltage across the diode and current flow, displayed in three regions:
Forward Bias Region: Current exponentially increases after exceeding barrier potential.
Reverse Bias Region: A small current flows until breakdown voltage is reached.
Breakdown Region: Current sharply increases as voltage exceeds breakdown threshold, risking damage to the diode.
Rectifiers
Definition: A device that converts alternating current (AC) into direct current (DC).
Operation Principle: Based on the unidirectional current flow characteristic of p-n junction diodes.
Types of Rectifiers
Half Wave Rectifier
Construction: Uses a diode to allow only positive half cycles of AC to pass.
Output: Pulsating DC from positive half-cycles, zero output during negative half-cycles.
Efficiency and Advantages: Low cost, simple circuit, low efficiency.
Full Wave Rectifier
Definition: Allows both halves of the AC waveform to be used, yielding smoother DC output.
Advantages: Higher efficiency and DC output voltage compared to half-wave rectifiers.
Efficiency of Rectifiers
Half-Wave Rectifier Efficiency: Approximately 40.2%.
Full-Wave Rectifier Efficiency: Approximately 80.4%.
Conclusion: Pulsating DC from rectifiers can be smoothed into pure DC using filter circuits like capacitors and inductors.