Unit 2 Water Review Vocabulary Flashcards

Two-Day Study Plan and Execution Methodology

  • Study Plan Overview and Schedule:

    • Tonight (20 Minutes): Cover Matter, Heat Transfer, and Water Properties (Questions 1–12).
    • Tonight (25 Minutes): Cover Groundwater, Pollution, and Water Use (Questions 13–28).
    • Tonight (15 Minutes): Cover Atoms, Conversions, and Graphs (Questions 29–35).
    • Tomorrow First Session: Take Practice Test A without notes. Correct every missed item immediately.
    • Tomorrow Second Session: Study only missed concepts, then take Practice Test B.
    • Test Morning (10 Minutes): Review the Fast Facts page. Do not introduce new study material.
  • Study Execution Rules:

    • Work through one section at a time while keeping all remaining pages out of sight.
    • Answer each question aloud first before writing down the response (recognition alone is insufficient for mastery).
    • Check answers immediately. Record every missed item on a dedicated retry sheet.
    • Retest all missed items after a 15-minute15\text{-minute} interval and retest them again the following day.
    • Utilize Knowt for digital flashcard repetition, but execute all metric conversions, atom calculations, graph plotting, and long written explanations manually on paper.
  • Three Core Rules to Memorize:

    • Mass Number=Protons+Neutrons\text{Mass Number} = \text{Protons} + \text{Neutrons}
    • Charge=Protons−Electrons\text{Charge} = \text{Protons} - \text{Electrons}
    • Independent Variable=x-axis;Dependent Variable=y-axis\text{Independent Variable} = x\text{-axis}; \quad \text{Dependent Variable} = y\text{-axis}

Matter, Heat Transfer, and Water Properties

  • Matter:

    • Defined as anything that possesses mass and occupies physical space.
  • Phase Changes (Liquid to Gas):

    • Vaporization: The process by which a liquid transitions into a gas.
    • Evaporation: Vaporization that occurs strictly at the liquid's surface.
    • Thermal Dynamics: The substance absorbs thermal energy during this state change, which increases particle motion.
  • Thermal Energy Transfer Mechanisms:

    • Conduction: Thermal energy transfer via direct physical contact between particles. Example: A metal spoon becoming hot while resting in a cup of hot water.
    • Convection: Thermal energy transfer through the bulk movement of a fluid (liquid or gas). Warm, less-dense air or liquid rises, whereas cool, denser fluid sinks.
    • Mechanics of Hot Air Rising: Heating air causes its constituent particles to move faster and spread farther apart. This expansion makes the air less dense than the surrounding cooler air, resulting in buoyancy that forces it to rise.
    • Radiation: Thermal energy transfer through electromagnetic waves. Radiation does not require a material medium. Examples: Sunlight warming the surface of Earth, or a person feeling radiant heat from a fire.
    • Particle Speed and Temperature: Particles in a hot substance possess a higher average speed, whereas particles in a cool substance move more slowly on average.
  • Properties of Water:

    • Adhesion: The attractive force between water molecules and a different substance. Memory Cue: Water adheres to another surface.
    • Cohesion: The attractive force between individual water molecules. Memory Cue: Water coheres to water.
    • Surface Tension: Cohesive forces acting at the liquid surface create a tight, film-like surface layer that resists external force and breaking.
  • Hydrologic Phase Transitions:

    • Condensation: Process where gas or water vapor loses thermal energy and transforms into a liquid. Examples: Water droplets forming on a cold glass, moisture fogging a bathroom mirror, or atmospheric cloud formation.
    • Precipitation: Any form of water falling from clouds back to Earth's surface. Primary types include rain, snow, sleet, and hail.

Groundwater, Pollution, and Watershed Systems

  • Infiltration:

    • The movement of surface water soaking into soil and rock layers. Infiltrated water migrates downward under gravity to recharge groundwater reserves.
  • Pollution Types:

    • Point-Source Pollution: Pollutants originating from a single, distinct, and identifiable source. Example: An industrial effluent pipe discharging directly into a stream.
    • Nonpoint-Source Pollution: Pollutants originating from diffuse, widespread areas carried into waterways by surface runoff. Examples: Agricultural fertilizers, vehicle oil, and surface trash.
  • Water Usage Categories:

    • Direct Water Use: Water consumed personally and visibly in daily life. Examples: Drinking water or bathing.
    • Indirect Water Use: Water consumed to cultivate food or manufacture goods. Examples: Irrigation water for growing crops or water used to dye textiles.
  • Groundwater Geology and Dynamics:

    • Aquifer: A permeable underground rock or sediment layer capable of storing and transmitting groundwater. Note: An aquifer is a porous geological structure, not an underground open lake.
    • Groundwater Contamination Mechanism: Precipitation transforms into groundwater through infiltration and percolation. Hazardous materials such as surface fertilizers, industrial chemicals, leaking storage tanks, septic system effluent, and polluted runoff percolate through soil to contaminate groundwater aquifers.
    • Aquifer Recharge: The process by which water moves downward into an aquifer to replenish stored reserves. Recharge balances artificial water extraction via pumping and maintains the level of the water table.
  • Human Activity Impacts on Aquifers:

    • Impenetrable structural surfaces such as asphalt pavement, concrete roads, and buildings block natural infiltration. This increases surface runoff volume while drastically reducing natural aquifer recharge.
    • Excessive groundwater extraction through pumping lowers the local water table.
    • Mitigation strategies include setting aside protected open space and constructing designated recharge basins.
  • Hydrogeological Properties:

    • Porosity: The percentage of total void space (open pores) within a rock or soil sample. Higher porosity allows greater volume storage of water. Porosity measures total storage capacity, not fluid flow speed.
    • Permeability: The measure of a material's capacity to transmit fluids through interconnected pores or fractures. High permeability allows water to flow through effortlessly.
  • Subsurface Zones:

    • Aerated Zone (Unsaturated Zone): The underground region located directly above the water table where soil pore spaces are filled with a combination of air and water.
    • Saturated Zone: The subterranean zone where every available pore space and rock fracture is completely filled with water.
    • Water Table: The uppermost boundary layer of the saturated zone.
  • Watersheds and Local Water Systems:

    • Watershed (Drainage Basin): A continuous land area where all surface runoff drains into a shared body of water such as a stream, river, lake, or ocean outlet.
    • Parker Water System:
      • Supply Sources: Surface water drawn from Cherry Creek and Newlin Gulch (stored within Rueter-Hess Reservoir), deep groundwater from the Denver Basin aquifer system, and WISE water.
      • Downstream Drainage Route: Local surface runoff flows into local gulches and Cherry Creek, continuing into the South Platte River, proceeding through the Platte, Missouri, and Mississippi river networks, and eventually discharging into the Gulf of Mexico.
    • Environmental Impact of Urban Development: Expanding impermeable surfaces (roofs, roads, parking lots) reduces natural infiltration and elevates surface runoff. This produces reduced recharge, severe soil erosion, flash flooding, and increased transport of oil, trash, and synthetic chemicals into aquatic ecosystems. Concurrently, heightened municipal demand depletes local water reserves.
    • Urban Water Cycle: The engineered infrastructure system designed to manage water within human settlements. The three study stages are:
      1. Collection
      2. Treatment
      3. Distribution
    • Desalination: The process of removing dissolved salts from ocean water or brackish groundwater. Desalination is not universally adopted due to its extreme energy requirements, high financial expenses, and the generation of hyper-saline brine waste requiring hazardous disposal.

Scientific Methods, Atomic Structure, and Metric Conversions

  • Graphing Standards and Variable Designation:

    • Every complete scientific graph must feature a descriptive title, clearly labeled axes, explicit measurement units, an appropriate numerical scale, correctly plotted data points, and a legend or key when applicable.
    • Independent Variable: Plotted exclusively on the horizontal x-axisx\text{-axis}.
    • Dependent Variable: Plotted exclusively on the vertical y-axisy\text{-axis}.
  • Observations versus Inferences:

    • Observation: Objective information gathered directly via physical measurement, numerical recording, or primary sensory perception.
    • Inference: A logical deduction, explanation, or conclusion synthesized from observations combined with prior knowledge.
  • Subatomic Particles:

    • Proton: Located inside the atomic nucleus; relative mass of approximately 1 amu1\,\text{amu}; electrical charge of +1+1.
    • Neutron: Located inside the atomic nucleus; relative mass of approximately 1 amu1\,\text{amu}; electrical charge of 00.
    • Electron: Located in the outer electron cloud surrounding the nucleus; relative mass of approximately 0 amu0\,\text{amu}; electrical charge of −1-1.
  • Atomic Structure Calculations Example:

    • System Configuration: An atom contains 66 protons, 1010 neutrons, and 77 electrons.
    • Element Identity: Carbon (because atomic number Z=6\text{Z} = 6 protons).
    • Mass Number: Mass Number=6+10=16\text{Mass Number} = 6 + 10 = 16
    • Net Electrical Charge: Charge=6−7=−1\text{Charge} = 6 - 7 = -1
  • Definitions of Atoms and Molecules:

    • Atom: The fundamental microscopic unit of an element that retains all chemical properties of that element.
    • Molecule: A stable, electrically neutral particle composed of two or more atoms bound together by chemical bonds.
  • Metric System Conversions:

    • Prefix Conversion Scale:
      • kilo-=1,000×base unit\text{kilo-} = 1{,}000\times \text{base unit}
      • hecto-=100×base unit\text{hecto-} = 100\times \text{base unit}
      • deka-=10×base unit\text{deka-} = 10\times \text{base unit}
      • base unit=1×base unit\text{base unit} = 1\times \text{base unit}
      • deci-=0.1×base unit\text{deci-} = 0.1\times \text{base unit}
      • centi-=0.01×base unit\text{centi-} = 0.01\times \text{base unit}
      • milli-=0.001×base unit\text{milli-} = 0.001\times \text{base unit}
    • Decimal Movement Rules:
      • Shift the decimal point one position for every step along the metric staircase.
      • When converting to smaller metric units: Shift decimal point to the right.
      • When converting to larger metric units: Shift decimal point to the left.
    • Sample Worked Conversions:
      • Convert 39,100 L39{,}100\,\text{L} to kL\text{kL}: Shift decimal 33 places left →39.1 kL\rightarrow 39.1\,\text{kL}
      • Convert 0.0008082 kL0.0008082\,\text{kL} to cL\text{cL}: Shift decimal 55 places right →80.82 cL\rightarrow 80.82\,\text{cL}
      • Convert 170.4 L170.4\,\text{L} to mL\text{mL}: Shift decimal 33 places right →170,400 mL\rightarrow 170{,}400\,\text{mL}
  • Water-Cycle Diagram Label Key:

    • Label A: Precipitation
    • Label B: Runoff
    • Label C: Infiltration
    • Label D: Groundwater Flow
    • Label E: Evaporation
    • Label F: Atmospheric Transport (toward cloud formation)
    • Note: Condensation represents cloud droplet formation; identify this term if a test diagram points to the cloud structure itself rather than the movement arrow.

Fast Facts Quick-Reference Summary

  • Core Concepts and Memory Cues:

    • Matter: Possesses mass and occupies space
    • Conduction: Heat transfer via direct physical contact
    • Convection: Heat transfer via bulk fluid movement
    • Radiation: Energy transfer via electromagnetic waves
    • Evaporation: Liquid to gas transition; thermal energy is absorbed
    • Condensation: Gas to liquid transition; thermal energy is released
    • Cohesion: Water molecules sticking to water molecules
    • Adhesion: Water molecules sticking to non-water surfaces
    • Porosity: Volume of open pore space; defines fluid storage capacity
    • Permeability: Ease of fluid transmission through interconnected spaces
    • Aerated Zone: Subsurface area above water table containing air and water
    • Saturated Zone: Subsurface area below water table where pores are filled with water
    • Aquifer: Permeable geological layer that stores and transmits groundwater
    • Watershed: Total land area draining into a single outlet
    • Point Pollution: Originates from one discrete, identifiable source
    • Nonpoint Pollution: Originates from many diffuse surface runoff sources
    • Observation: Information directly measured, seen, or recorded
    • Inference: Logical explanation built on evidence and prior knowledge
    • Graph Rules: Independent variable on x-axisx\text{-axis}; Dependent variable on y-axisy\text{-axis}
    • Atom Rules: Element=Protons\text{Element} = \text{Protons}; Mass Number=Protons+Neutrons\text{Mass Number} = \text{Protons} + \text{Neutrons}; Charge=Protons−Electrons\text{Charge} = \text{Protons} - \text{Electrons}
  • System Patterns and Principles:

    • Increased pavement →\rightarrow reduced soil infiltration and groundwater recharge →\rightarrow elevated surface runoff and pollutant transport.
    • High geological permeability →\rightarrow rapid migration of water and dissolved contaminants through subsoil.
    • Declining groundwater table →\rightarrow localized drying of residential water wells and depleted drinking water reserves.
    • Electrostatic interaction: Opposite electrical charges attract; like electrical charges repel.
    • Subatomic modifications:
      • Adding or removing protons alters the atomic number, creating a completely different element.
      • Adding or removing neutrons changes the mass number and creates an isotope, leaving the element unchanged.
      • Adding or removing electrons changes the electrical charge, producing an ion.

Practice Assessments and Detailed Solutions

Practice Test A

  • Multiple-Choice Questions:

    1. Which process transfers thermal energy through direct contact?
      • A. Radiation
      • B. Conduction
      • C. Convection
      • D. Condensation
      • Answer: B. Conduction
    2. Why does warm air rise?
      • A. It becomes more dense
      • B. Its particles stop moving
      • C. It becomes less dense
      • D. Gravity becomes weaker
      • Answer: C. It becomes less dense
    3. Water sticking to the side of a glass demonstrates—
      • A. cohesion
      • B. adhesion
      • C. radiation
      • D. precipitation
      • Answer: B. adhesion
    4. Which term measures the amount of open space in rock or soil?
      • A. Permeability
      • B. Recharge
      • C. Porosity
      • D. Runoff
      • Answer: C. Porosity
    5. Where are pore spaces completely filled with water?
      • A. Aerated zone
      • B. Saturated zone
      • C. Atmosphere
      • D. Watershed
      • Answer: B. Saturated zone
    6. A parking lot most directly causes—
      • A. more infiltration
      • B. more groundwater recharge
      • C. more runoff
      • D. less pollution transport
      • Answer: C. more runoff
    7. Oil washed from many roads into a creek is—
      • A. point-source pollution
      • B. nonpoint pollution
      • C. desalination
      • D. condensation
      • Answer: B. nonpoint pollution
    8. Which particle identifies the element?
      • A. Neutron
      • B. Electron
      • C. Proton
      • D. Molecule
      • Answer: C. Proton
    9. Which graph axis normally contains the independent variable?
      • A. x axis
      • B. y axis
      • C. both axes
      • D. neither axis
      • Answer: A. x axis
    10. A factory pipe releasing waste is—
      • A. nonpoint pollution
      • B. point-source pollution
      • C. indirect water use
      • D. groundwater recharge
      • Answer: B. point-source pollution
  • Free-Response and Calculation Items:

    1. Item: An atom has 88 protons, 99 neutrons, and 1010 electrons. Identify the element, mass number, and charge.
      • Solution: Element = Oxygen (88 protons); Mass Number=8+9=17\text{Mass Number} = 8 + 9 = 17; Charge=8−10=−2\text{Charge} = 8 - 10 = -2
    2. Item: Convert 39,100 L39{,}100\,\text{L} to kL\text{kL}. Show the decimal movement.
      • Solution: 39.1 kL39.1\,\text{kL} (Decimal shifts 33 places left).
    3. Item: Convert 0.0008082 kL0.0008082\,\text{kL} to cL\text{cL}.
      • Solution: 80.82 cL80.82\,\text{cL} (Decimal shifts 55 places right).
    4. Item: Explain the difference between porosity and permeability.
      • Solution: Porosity is the measure of open space in a material defining storage volume; permeability is the ability to transmit fluids through connected pore paths.
    5. Item: Explain how groundwater becomes polluted.
      • Solution: Surface water dissolves contaminants (fertilizers, chemicals, septic fluids, vehicle oil) and carries them downward via infiltration and percolation into an underlying aquifer.
    6. Item: Identify the observation and inference: The sidewalk is wet, so Maya concludes that it rained overnight.
      • Solution: Observation = The sidewalk is wet; Inference = It rained overnight.
    7. Item: Name the three urban water-cycle parts used in the class study guide.
      • Solution: Collection, treatment, and distribution.
    8. Item: Explain why desalination is not used everywhere.
      • Solution: Desalination requires immense energy consumption, involves high monetary expenditures, and generates hyper-saline brine waste that presents disposal challenges.
    9. Item: List the six water-cycle diagram labels A through F from the study guide.
      • Solution: A = Precipitation; B = Runoff; C = Infiltration; D = Groundwater flow; E = Evaporation; F = Atmospheric transport (or cloud-forming condensation).
    10. Item: A town adds roads and buildings above an aquifer. Predict two effects on water and explain why.
      • Solution: 1) Decreased infiltration and groundwater recharge due to impermeable surfaces. 2) Increased surface runoff, flooding, and pollutant transport into local streams.

Practice Test B

  • Multiple-Choice Questions:

    1. A material has many pore spaces but they are poorly connected. It could have—
      • A. high porosity and low permeability
      • B. low porosity and high permeability
      • C. no mass
      • D. no groundwater storage
      • Answer: A. high porosity and low permeability
    2. A chemical spill occurs above highly permeable soil. What is the greatest concern?
      • A. The chemical cannot enter soil
      • B. The chemical may reach groundwater quickly
      • C. The water table must rise
      • D. Evaporation will remove every chemical
      • Answer: B. The chemical may reach groundwater quickly
    3. Which change turns water vapor into liquid droplets?
      • A. Evaporation
      • B. Condensation
      • C. Infiltration
      • D. Runoff
      • Answer: B. Condensation
    4. A shirt requires water during cotton farming and manufacturing. This is—
      • A. direct use
      • B. indirect use
      • C. recharge
      • D. surface tension
      • Answer: B. indirect use
    5. If groundwater is pumped faster than it is recharged, the water table will most likely—
      • A. rise
      • B. remain fixed
      • C. drop
      • D. become a cloud
      • Answer: C. drop
    6. Which particle has very little mass and a negative charge?
      • A. Proton
      • B. Neutron
      • C. Electron
      • D. Atom
      • Answer: C. Electron
    7. Removing a neutron changes—
      • A. element name only
      • B. charge only
      • C. mass number only
      • D. element and charge
      • Answer: C. mass number only
    8. Removing an electron changes—
      • A. charge
      • B. element name
      • C. mass number
      • D. number of neutrons
      • Answer: A. charge
    9. Which is qualitative data?
      • A. The water took 30 seconds to drain
      • B. The water measured 20 mL
      • C. The water appeared cloudy
      • D. The sample temperature was 18°C
      • Answer: C. The water appeared cloudy
    10. Which statement is an inference?
      • A. The sidewalk is wet
      • B. The thermometer reads 22°C
      • C. The sample is green
      • D. The sprinkler probably ran earlier
      • Answer: D. The sprinkler probably ran earlier
    11. In a graph of porosity versus permeability, permeability is on the x axis. It is the—
      • A. dependent variable
      • B. independent variable
      • C. conclusion
      • D. qualitative result
      • Answer: B. independent variable
    12. A watershed is—
      • A. an underground lake
      • B. land that drains to a common outlet
      • C. only a city sewer
      • D. water held by surface tension
      • Answer: B. land that drains to a common outlet
  • Free-Response and Calculation Items:

    1. Item: An atom has 66 protons, 1010 neutrons, and 77 electrons. Identify its element, mass, and charge.
      • Solution: Element = Carbon; Mass Number=6+10=16\text{Mass Number} = 6 + 10 = 16; Charge=6−7=−1\text{Charge} = 6 - 7 = -1
    2. Item: Convert 170.4 L170.4\,\text{L} to mL\text{mL}.
      • Solution: 170,400 mL170{,}400\,\text{mL} (Decimal shifts 33 places right).
    3. Item: Compare adhesion, cohesion, and surface tension.
      • Solution: Adhesion is attraction between water and non-water surfaces; cohesion is attraction between water molecules; surface tension is cohesive attraction forming a surface layer that resists rupture.
    4. Item: Explain conduction, convection, and radiation using one example of each.
      • Solution: Conduction = thermal transfer by direct contact (e.g., spoon in hot liquid); Convection = fluid thermal movement (e.g., warm air rising); Radiation = electromagnetic energy transmission (e.g., solar warming).
    5. Item: Explain how infiltration, recharge, the water table, and an aquifer are connected.
      • Solution: Infiltration moves water into soil; percolation carries it downward to recharge an aquifer; the upper surface of this saturated aquifer zone is the water table.
    6. Item: Explain why development can decrease water quality and groundwater availability.
      • Solution: Development introduces nonporous surfaces that prevent infiltration and direct polluted runoff into surface waters; reduced infiltration combined with human extraction lowers the water table.
    7. Item: Describe Parker's drinking-water sources and the downstream path of local runoff.
      • Solution: Sources include Cherry Creek, Rueter-Hess Reservoir surface storage, Denver Basin deep groundwater, and WISE water. Surface runoff drains into local gulches, flows into Cherry Creek, enters the South Platte River, and travels down the Missouri and Mississippi Rivers into the Gulf of Mexico.
    8. Item: Write one observation and one reasonable inference about a cloudy water sample.
      • Solution: Observation = The water sample appears cloudy; Inference = Suspended sediment or particulate matter is present in the sample.

Digital Flashcard Setup Instructions (Knowt)

  • Configuration Procedure:

    1. Open Knowt, click Create Flashcards, and select Import Manually.
    2. Copy the content from Jake Unit 2 Knowt Import.txt.
    3. Set the separator between term and definition to Tab.
    4. Set the separator between individual flashcards to New Line.
    5. Label the deck as Jake Unit 2 Water Test.
    6. Select Learn mode initially and require typed/written answers.
    7. Filter deck after one full pass to review starred or missed terms.
    8. Take Practice Test mode prior to exam day, ensuring all metric conversion and subatomic calculations are written out by hand on paper.
  • Recommended Section Execution Sequence:

    1. Heat and Water Properties
    2. Groundwater and Pollution
    3. Water Cycle and Urban Water
    4. Atoms and Charge
    5. Graphs, Evidence, and Metric Conversions
  • Efficiency Guideline: If a card is answered correctly twice consecutively, remove it from the active rotation to focus time on missed terms.