Comprehensive Geography Study Guide: Physical, Chemical, and Biological Weathering

Key Weathering Terminology

  • Weathering: The process of breaking down surface and subsurface rock into small particles through physical, chemical, and biological processes. Once rock is broken down, these small particles can be eroded and transported by agents such as rivers, moving glacial ice, wind, and wave action.

  • Particle: A very small piece of matter or rock.

  • Fragment: A small piece broken off a larger rock body.

  • Thermal: Pertaining to, caused by, or affected by heat and temperature changes.

  • Fracturing: The process of breaking, splitting, or cracking a solid material.

  • Scree: An accumulation of loose, angular stones or rocky debris lying on a slope or collected at the base of a hill or cliff.

  • Decompose: To rot, decay, or break down chemically.

  • Dissolved: The condition where a solid material becomes absorbed into a liquid solution.

Physical Weathering

Physical weathering (also known as mechanical weathering) involves the physical breakdown of rocks into smaller fragments without altering the chemical composition of the rock. This breakdown occurs primarily through expansion and contraction driven by temperature changes, pressure release, or freezing water.

Thermal Fracturing and Exfoliation

  • Temperature Range Driven Weathering: Physical weathering caused by temperature fluctuation occurs predominantly in environments with a large daily (diurnal) temperature range, where days are hot and nights are cold.

  • Mechanism of Thermal Exfoliation:

    • During hot daylight hours, intense solar radiation causes the outer layers of the rock to expand.

    • During cold night hours, the rock cools down and contracts.

    • Because rock is a poor conductor of heat, stress develops between the expanding/contracting outer shell and the cooler inner core.

    • Repeated cycles of heating and cooling cause the rock's outer layers to crack and peel off in thin sheets, a process known as exfoliation.

  • Fire-Induced Weathering: Exposure to intense heat from fires causes extremely rapid expansion of rock surfaces, creating intense thermal stress that cracks and breaks off outer rock pieces rapidly.

Pressure Release (Unloading)

  • Mechanism of Unloading:

    • Igneous rocks, such as granite, form deep within the Earth's crust under high overburden pressure from overlying rock masses.

    • As erosion gradually removes the thick overlying layers of rock, this extreme pressure is relieved (unloaded).

    • The removal of pressure allows the underlying granite to expand upward and outward.

  • Fracturing and Exfoliation: The expanding rock cracks and fractures along sheets parallel to the ground surface, causing large slabs or concentric layers of rock to separate and peel away.

Freeze-Thaw Weathering (Frost Shattering)

  • Mechanism:

    • Liquid water collects in existing cracks, joints, and pores within a rock.

    • When ambient air temperatures drop below freezing (0 ∘C0\,^\circ\text{C}), the trapped water freezes into ice.

    • As water freezes into ice, its volume expands by 9−10%9-10\%, placing strong outward physical pressure on the surrounding rock walls.

    • When the temperature rises above freezing (0 ∘C0\,^\circ\text{C}), the ice melts back into liquid water.

  • Shattering and Scree Formation:

    • Continuous, repeated cycles of freezing and thawing progressively weaken the rock structure until it shatters completely into sharp, angular fragments.

    • This process is most effective in climate zones where temperatures frequently fluctuate around 0 ∘C0\,^\circ\text{C}.

    • The shattered angular rock fragments fall down steep rock faces under gravity and accumulate as scree at the foot of the slope.

Spheroidal Weathering

  • Mechanism: A form of weathering where sharp edges and corners of rock blocks are worn away, causing concentric shells of weathered rock to spall off and leaving rounded or spherical boulder cores.


Diagrams showing outer layer exfoliation and freeze-thaw weathering processes


Examples of pressure release in granite, spheroidal weathering, fire-induced exfoliation, and scree in the Caucasus Elbrus region

Chemical Weathering

Chemical weathering is the process by which rocks are decomposed, dissolved, or loosened through chemical reactions that alter the original mineral composition of the rock.

Carbonation and Rainwater Acidification

  • Acidic Character of Rainwater: Rainwater acts as a natural weak acid because it absorbs and dissolves carbon dioxide and oxygen gas while falling through the atmosphere.

  • Dissolution of Minerals: When weakly acidic rainwater reaches rock surfaces, it reacts with mineral compounds. Soluble minerals—especially calcium carbonate in limestone—dissolve into the rainwater and are carried away, weakening the rock matrix and causing structural breakdown.

Limestone Pavements: Grikes and Clints

  • Limestone Pavement: An exposed flat surface layer of bare limestone rock that has been weathered by carbonation and solution action.

  • Grikes: Deep vertical fissures or grooves dissolved along the natural joints of a limestone pavement by acidic rainwater. Grikes range from a few centimeters to several meters in depth.

  • Clints: The flat-topped, intact blocks of limestone rock left isolated between surrounding grikes.

Subterranean Caves and Speleothems

  • Subterranean Solution Caverns: Underground layers of limestone dissolve as acidic water drains through geological zones of weakness, carving out cavernous hollow spaces beneath the Earth's surface.

  • Speleothems and Internal Cave Features:

    • Stalactites: Icicle-like mineral deposits hanging down from cave roofs, formed as mineral-laden water drips down and leaves calcite precipitates behind.

    • Stalagmites: Cone-shaped calcite structures growing upward from the cave floor directly below dripping stalactites.

    • Calcite Pillars: Solid vertical rock columns created when a downward-growing stalactite meets an upward-growing stalagmite.

    • Underground Streams and Lakes: Subterranean streams flow through carved underground passages and pool into underground lakes inside large cave chambers.

  • The Cango Caves: The Cango Caves, located near Oudtshoorn in the Western Cape, represent South Africa's most famous underground limestone cave system.

Honeycomb Weathering

  • Mechanism: A form of differential chemical weathering that occurs in rocks containing multiple minerals with differing levels of chemical resistance.

  • Cavity Formation: Minerals with faster chemical reaction rates decompose first, leaving behind a network of small holes, pits, and hollows across the rock surface that resembles a honeybee honeycomb.


Diagrams of a limestone pavement showing grikes and clints, and a limestone cave with stalactites, stalagmites, and calcite pillars


Photograph of Cango Caves near Oudtshoorn and honeycomb weathering on rock

Biological Weathering

Biological weathering is the breakdown of rock caused directly or indirectly by living organisms through a combination of mechanical force and biological chemical secretions.

  • Plant Root Mechanical Action:

    • Tree roots are the primary driver of biological weathering.

    • Roots extend into existing rock cracks, fissures, and joint lines in search of water and nutrients.

    • As trees grow larger, their root systems expand in diameter, exerting physical pressure that forces joints open and splits massive rocks apart (e.g., fig tree roots enlarging rock joints).

  • Organic Acid Secretions: Living plants, lichens, and microorganisms produce organic acids that chemically decompose surface rock minerals.

  • Burrowing Animals: Animals burrowing into rock fractures and soil expose fresh subsurface rock surfaces to air and moisture while physically loosening rock debris.

Geographic Distribution of Weathering Processes

  • Physical Weathering Distribution:

    • Occurs wherever thermal conditions change, but is most dominant in hot deserts with extreme diurnal temperature variations.

    • Freeze-thaw weathering is concentrated in cold, high-altitude or high-latitude regions where temperatures fluctuate around 0 ∘C0\,^\circ\text{C} (daytime above freezing, nighttime below freezing).

  • Chemical Weathering Distribution:

    • Occurs in all regions with rainfall, but because ambient heat accelerates chemical reaction rates, it is most intense in hot, humid climate zones with high annual rainfall (such as equatorial regions).

Impact of Human Activities on Weathering

  • Atmospheric Chemical Pollution: Human industrial operations, power generating stations, and vehicle exhaust emissions release massive amounts of sulfur dioxide and nitrogen oxides into the air, drastically increasing chemical pollution levels.

  • Acid Rain Effects: Atmospheric pollutants dissolve in water vapor to create acid rain, which severely accelerates rates of chemical weathering on stone statues, gravestones, buildings, and historical monuments.