Chapter 4: Molecules and Compounds chemistry
Foundations of Chemical Compounds and Bonding
Elements, Molecules, and Compounds:
When two or more elements combine, a molecule is formed.
Molecules may consist of atoms of the same element (e.g., , , ) or different elements.
Compounds are substances formed from two or more different elements chemically united in fixed proportions. They include both ionic compounds and molecular compounds.
The vast diversity of substances found in nature is a direct consequence of the ability of elements to combine and form distinct compounds.
Emergent Properties of Compounds (Hydrogen, Oxygen, and Water):
When elements combine chemically to form a compound, an entirely new substance results with physical and chemical properties entirely distinct from those of its constituent elements.
Property Comparison between Constituent Elements and Compound:
Boiling Point:
Hydrogen ():
Oxygen ():
Water ():
State of Matter at Room Temperature:
Hydrogen: Gas
Oxygen: Gas
Water: Liquid
Flammability and Reactivity:
Hydrogen: Highly explosive gas.
Oxygen: Non-flammable itself, but required to support combustion.
Water: Non-flammable liquid used to extinguish flames.
Distinction Between Mixtures and Compounds:
Mixture (e.g., Hydrogen and Oxygen Gas Mixture):
Components can be mixed in any arbitrary, continuously variable ratio.
Constituent elements retain their individual chemical and physical properties.
Substances coexist without chemical bonds linking the different atoms together.
Compound (e.g., Pure Liquid Water, ):
Elements are joined by chemical bonds in an exact, invariant whole-number ratio.
Water molecules maintain a fixed stoichiometric ratio of exactly two hydrogen atoms to one oxygen atom:
Chemical reaction representation:

Classification and Properties of Chemical Bonds
Nature of Chemical Bonds:
Chemical bonds are electrostatic forces of attraction holding atoms together.
They result directly from the fundamental attractions between oppositely charged particles (protons in atomic nuclei and electrons in electron clouds).
Bonding configurations minimize the potential energy of the interacting atoms.
Chemical bonds are classified into three primary categories:
Ionic Bonds: Electrostatic attraction between oppositely charged ions.
Covalent Bonds: Sharing of valence electrons between atoms.
Metallic Bonds: Pooling of valence electrons across an array of metal atoms.

Periodic Table Divisions and Bonding Tendencies:
The periodic table is divided into three major categories that dictate bonding behavior:
Metals: Located on the left and center of the table (e.g., , , , , , , , , , , ). Metals tend to have low ionization energies and lose electrons easily, forming positively charged cations.
Nonmetals: Located in the upper right portion of the table, plus hydrogen (e.g., , , , , , , , , ). Nonmetals have high electron affinities and tend to gain or share electrons, forming negatively charged anions or covalent bonds.
Metalloids: Border the dividing line between metals and nonmetals (e.g., , ). They exhibit intermediate semiconductor properties.

Ionic Bonds (Metal + Nonmetal):
Occur primarily between metal atoms and nonmetal atoms.
Involve the complete transfer of one or more valence electrons from the metal to the nonmetal.
The metal atom loses electron(s) to become a positively charged cation:
The nonmetal atom gains electron(s) to become a negatively charged anion:
Oppositely charged ions are attracted to one another by non-directional Coulombic forces, packing into a three-dimensional crystalline lattice (e.g., solid table salt, ).
Covalent Bonds (Nonmetal + Nonmetal):
Occur between two or more nonmetal atoms.
Because nonmetals have relatively high ionization energies, neither atom completely transfers an electron to the other.
Instead, bonding atoms share pairs of valence electrons to achieve stable noble-gas electron configurations.
Covalently bonded clusters of atoms form distinct, discrete entities known as molecules, producing molecular compounds (e.g., solid or liquid water, ).
Classification Practice (Ionic vs. Molecular):
: Ionic (Calcium, , is an alkaline earth metal; Fluorine, , is a halogen nonmetal).
: Molecular (Both Fluorine, , and Oxygen, , are nonmetals).
: Ionic (Aluminum, , is a post-transition metal; Oxygen, , is a nonmetal).
: Molecular (Hydrogen, , and Chlorine, , are both nonmetals).
: Ionic (Copper, , is a transition metal; Chlorine, , is a nonmetal).
: Molecular (Carbon, , Hydrogen, , and Oxygen, , are all nonmetals).
Chemical Formulas and Molecular Representations
Categorization of Chemical Formulas:
Empirical Formula:
Communicates the simplest whole-number ratio of atoms of each element present in a compound.
Provides relative stoichiometric relationships rather than absolute quantities.
Examples:
For , greatest common factor () is ; the empirical formula is .
For , is ; the empirical formula is .
For , is ; the empirical formula and molecular formula are identical ().
Molecular Formula:
Communicates the actual, exact number of atoms of each element present in one discrete molecule of a compound.
Always a whole-number integer multiple () of the empirical formula: .
Structural Formula:
A structural diagram illustrating how atoms are bonded and physically arranged in space.
Uses solid lines to symbolize shared covalent electron pairs (chemical bonds).
Example: Hydrogen peroxide () structural formula is arranged as .
Information Hierarchy of Formulas:
Structural Formula: Conveys the most information (identity, exact number, connectivity, and spatial arrangement of all atoms).
Molecular Formula: Conveys intermediate information (exact atomic composition and identity, but no bonding connectivity).
Empirical Formula: Conveys the least information (relative molar proportions only).
Three-Dimensional Molecular Models:
Ball-and-Stick Molecular Model: Represents atomic nuclei/cores as spheres and chemical bonds as connecting pegs/sticks, accurately reflecting bond angles and overall three-dimensional molecular geometry.
Space-Filling Molecular Model: Scaled representation where spheres overlap to illustrate the electron cloud density and relative volume occupied by atoms in space.

Standard CPK Color Conventions for Atomic Spheres:
Hydrogen (): White / Off-white
Carbon (): Black / Dark gray
Nitrogen (): Blue
Oxygen (): Red
Fluorine (): Light green / Yellow-green
Phosphorus (): Dark blue
Sulfur (): Yellow
Chlorine (): Green

Empirical Formula Derivation Practice:
()
(; already empirical)
()
()
()
(; already empirical)
Comprehensive Compound and Formula Classification Practice:
: Ionic compound, represented as an Empirical formula (all ionic compounds exist in continuous lattices represented by formula units).
: Molecular compound, written as a Molecular formula (empirical equivalent is ).
: Molecular compound, written as an Empirical formula (subscript ratio has no integer common factor greater than 1).
: Ionic compound, written as a Molecular formula (contains non-reduced integer subscripts; reduced formula unit is ).
: Ionic compound, written as an Empirical formula (ratio of ions to is ).
: Molecular compound, written as an Empirical formula (ratio cannot be further simplified).
Lewis Electron-Dot Models and the Octet Rule
The Lewis Model:
Valence electrons (outermost and electrons responsible for chemical bonding) are depicted as dots positioned around the elemental chemical symbol.
Dots are placed singly on the four sides (top, bottom, left, right) before pairing up, up to a maximum of 8 valence electrons.
Valence Electron Configurations and Lewis Symbols:
Carbon (): Ground state configuration (4 valence electrons) 4 unpaired dots around .
Neon (): Ground state configuration (8 valence electrons) 4 pairs of dots around .
Nitrogen atom (): Ground state configuration (5 valence electrons) 1 lone pair and 3 unpaired dots around .
Nitride ion (): Gained 3 electrons to attain noble-gas configuration (8 valence electrons) .
Magnesium ion (): Lost its two valence electrons () (shown without valence dots).
The Octet Rule and Electron Configuration Principles:
When atoms participate in chemical bonding, they tend to gain, lose, or share electrons until they achieve a stable noble gas electron configuration: (8 valence electrons).
Nonmetal Period 2 elements (, , , ) strictly obey the octet rule; they lack accessible orbitals and cannot expand their valence shells beyond 8 electrons.
Exceptions to the Octet Rule:
Duet Rule: Hydrogen () and Helium () are stable with only two electrons in the shell. Hydrogen forms a single covalent bond (duet).
Incomplete Octets: Boron () commonly forms stable molecular compounds with only three covalent bonds, accommodating just 6 valence electrons (e.g., ).
Expanded Octets: Central atoms from Period 3 (row 3) or higher in the periodic table can utilize unoccupied orbitals to accommodate 10, 12, or more valence electrons. This occurs through attaching additional terminal atoms, forming double bonds, or hosting extra nonbonding lone pairs.
Lewis Structures for Isolated Atoms, Anions, and Ionic Salts:
Fluorine atom (): 7 valence dots (, 3 pairs and 1 single dot).
Oxygen atom (): 6 valence dots (, 2 pairs and 2 single dots).
Sodium bromide (): Formed by transfer of 1 electron from to :
Nitride ion ():
Lithium sulfide (): Formed by transfer of 1 electron from each of two atoms to one atom: (or written as )
Aluminum sulfide (): Formed by transfer of 3 electrons from each of two atoms to three atoms (each accepting 2 electrons):
Predicting Monatomic Ion Charges Based on Periodic Group:
Lithium (, Group 1A): Loses 1 electron
Fluorine (, Group 7A): Gains 1 electron
Calcium (, Group 2A): Loses 2 electrons
Chlorine (, Group 7A): Gains 1 electron
Aluminum (, Group 3A): Loses 3 electrons
Oxygen (, Group 6A): Gains 2 electrons
Formulating Neutral Ionic Compounds via Charge Balancing (Criss-Cross Method):
Ionic compounds are electrically neutral overall; total positive charge must equal total negative charge.
Lithium and Fluorine: and (equal and opposite charges cancel ).
Calcium and Chlorine: and (one balances two ).
Aluminum and Oxygen: and (; ).
Sodium and Oxygen: and (; ).
Potassium and Nitrogen: and (; ).
Lithium and Bromine: and ( and cancel ).
Magnesium and Fluorine: and (; ).
Beryllium and Sulfur: and (equal and opposite charges cancel ).
Aluminum and Bromine: and (; ).
Ionic Crystal Lattices, Lattice Energy, and Electrical Conductivity
The Crystal Lattice Structure:
Solid ionic compounds do not exist as isolated, discrete molecules (there is no such entity as an isolated single molecule in the solid state).
Instead, they form an extended three-dimensional alternating array called a crystal lattice in which every cation is surrounded by multiple anions, and every anion is surrounded by multiple cations.
This arrangement maximizes attractive Coulombic interactions while minimizing repulsive forces between like-charged ions, stabilizing the solid.
The formula of an ionic compound is thus strictly an empirical formula unit representing the lowest whole-number ion ratio satisfying electrical neutrality.
Thermodynamics and Lattice Energy:
Definition: Lattice energy is the energy released when separated gaseous ions coalesce to form one mole of a solid crystalline ionic compound.
General thermochemical equation:
Because bond and lattice formation represents a drop in potential energy, lattice energy is always highly exothermic ().
Lattice energy cannot be measured directly through a single experimental measurement; it is calculated indirectly via thermochemical cycles (such as the Born-Haber cycle) using known thermodynamic properties.

Factors Governing the Magnitude of Lattice Energy:
Lattice energy is governed by Coulomb's law: where and represent the charges on the ions, and represents the interionic distance (sum of ionic radii).
Lattice energy depends directly on the magnitude of ionic charges and inversely on the distance between the nuclei of adjacent ions.
Relative Significance: Variations in the magnitude of ionic charge are substantially more impactful than variations in ionic radii. Doubling or tripling the charge (e.g., vs. ) increases electrostatic attraction by a factor of , whereas ionic radii vary only slightly across periods and groups.
Comparative Lattice Energy Case Studies:
Comparison 1 (Lithium Fluoride vs. Sodium Fluoride vs. Sodium Chloride vs. Magnesium Oxide):
Charges: , , and have charges of and ().
consists of and ().
Because the charge product of is four times larger, possesses the greatest lattice energy.
Among the compounds, ionic radius governs:
is smaller than , and is smaller than .
Order of lattice energy magnitude: .
Comparison 2 ( vs. ):
contains and ().
contains and ().
exhibits the larger (more negative/exothermic) lattice energy due to the greater magnitude of charge on the oxide ion.
Comparison 3 ( vs. ):
Both compounds possess identical and charges ().
Ionic radius: Rubidium () is smaller than Cesium (), resulting in a shorter interionic distance in .
exhibits the larger (more negative/exothermic) lattice energy.
Electrical Conductivity of Ionic Compounds:
Solid State (, Non-electrolyte): Ions are locked rigidly into fixed lattice positions. Because charged particles cannot freely migrate toward charged electrodes, solid sodium chloride is an electrical insulator (a connected light bulb will not illuminate).
Aqueous Solution (, Strong Electrolyte): When dissolved in water, the crystal lattice dissociates into mobile hydrated cations () and anions (). The free motion of these ions toward oppositely charged electrodes completes the electrical circuit, allowing electric current to flow readily (causing a connected light bulb to illuminate brightly).


Nomenclature of Ionic Compounds and Hydrates
Classification of Cations:
Type I Cations (Invariant Charge): Metals that form only one consistent charge in all compounds. These include:
Group 1A Alkali Metals (): , , , ,
Group 2A Alkaline Earth Metals (): , , , ,
Specific post-transition/transition metals: Aluminum (), Zinc (), Silver (
Type II Cations (Multivalent / Variable Charge): Metals that can form multiple stable cations of differing charges. These include most transition metals, inner transition metals, and certain heavy p-block metals (e.g., , , ).
Example: Iron forms both (as in ) and (as in ).
Naming Binary Ionic Compounds:
Binary ionic compounds contain only two distinct elements.
Rules for Naming Type I Binary Ionic Compounds:
State the name of the metal cation first (using its elemental name).
State the base name of the nonmetal anion second, adding the suffix -ide.
Prefixes (mono-, di-, etc.) are never used in ionic naming because ion charges unambiguously dictate stoichiometry.
Examples:
: Potassium chloride
: Calcium oxide
: Sodium chloride
: Aluminum chloride
Rules for Naming Type II Binary Ionic Compounds:
State the name of the metal cation first.
Indicate the charge of the metal cation using Roman numerals enclosed in parentheses immediately after the metal name.
State the base name of the nonmetal anion, adding the suffix -ide.
Examples:
: Iron(II) sulfide ( is is )
: Copper(II) oxide ( is is )
Writing Formulas from Systematic Names:
Sodium fluoride: and
Aluminum sulfide: and
Lead(IV) chloride: and
Potassium oxide: and
Nomenclature of Polyatomic Ions and Oxyanions:
Compounds containing polyatomic ions are named identically to binary ionic compounds, substituting the polyatomic ion's name for the monatomic ion.
Oxyanions: Polyatomic anions containing an element combined with varying numbers of oxygen atoms.
When an element forms two oxyanions in a series:
The ion with more oxygen atoms receives the suffix -ate.
The ion with fewer oxygen atoms receives the suffix -ite.
Examples: Nitrate () vs. Nitrite (); Sulfate () vs. Sulfite ().
When an element forms four oxyanions in a series (e.g., chlorine halogens):
Hypo- + root + -ite: (Hypochlorite)
Root + -ite: (Chlorite)
Root + -ate: (Chlorate)
Per- + root + -ate: (Perchlorate)
Comprehensive Polyatomic Ion Reference (Table 4.4):
Acetate:
Carbonate:
Hydrogen carbonate (or bicarbonate):
Hydroxide:
Nitrite:
Nitrate:
Chromate:
Dichromate:
Phosphate:
Hydrogen phosphate:
Dihydrogen phosphate:
Ammonium:
Hypochlorite:
Chlorite:
Chlorate:
Perchlorate:
Permanganate:
Sulfite:
Hydrogen sulfite (or bisulfite):
Sulfate:
Hydrogen sulfate (or bisulfate):
Cyanide:
Peroxide:
Polyatomic Practice Problems:
Potassium phosphate: and
: Sodium hydroxide
: Calcium acetate
Magnesium cyanide: and
Hydrated Ionic Compounds:
Hydrates are ionic compounds containing a specific, fixed number of water molecules associated with each formula unit.
They are named by stating the standard ionic compound name followed by a Greek prefix indicating the number of water molecules attached to the word hydrate.
Greek Hydrate Prefixes:
Representative Hydrate Examples:
: Magnesium sulfate heptahydrate (commonly known as Epsom salts)
: Cobalt(II) chloride hexahydrate
: Calcium sulfate hemihydrate
: Barium chloride hexahydrate
: Copper(II) sulfate pentahydrate
Covalent Bonding Mechanics and Molecular Nomenclature
Bonding Pairs vs. Lone Pairs:
Bonding Pair: A pair of valence electrons shared between two atoms to form a covalent bond.
Lone Pair (Nonbonding Pair): A pair of valence electrons associated exclusively with one particular atom that does not participate directly in bonding.
In a water molecule (), oxygen has two bonding pairs (shared with hydrogen atoms) and two lone pairs of nonbonding electrons, fulfilling an octet around oxygen and a duet for each hydrogen.

Multiplicity of Covalent Bonds:
Single Covalent Bond: The sharing of exactly one pair of electrons (2 total electrons) between two atoms (e.g., ).
Double Covalent Bond: The sharing of two pairs of electrons (4 total electrons) between two atoms (e.g., in molecular oxygen, ).
Elements that can readily double-bond with each other and themselves: Carbon (), Nitrogen (), Oxygen (), Sulfur (), and Phosphorus ().
Triple Covalent Bond: The sharing of three pairs of electrons (6 total electrons) between two atoms (e.g., in molecular nitrogen, ).
Elements that can readily triple-bond with each other and themselves: Carbon (), Nitrogen (), Oxygen (), and Sulfur ().

Formulas and Nomenclature of Binary Molecular Compounds:
Unlike ionic compounds, formulas of molecular compounds cannot be deduced from simple ion charge balance because nonmetals frequently combine in multiple distinct stoichiometric ratios.
Example: Nitrogen and oxygen combine to form numerous distinct binary compounds: , , , , , and .
Rules for Naming Binary Molecular Compounds:
Write the Greek prefix indicating the number of atoms of the first element, followed by the first element's full name. If there is only one atom of the first element, mono- is omitted.
Write the Greek prefix indicating the number of atoms of the second element, followed by the base name of the second element ending in -ide.
Maintain the elements in the exact order they appear in the formula.
Greek Molecular Numerical Prefixes:
Molecular Nomenclature Practice Problems:
: Nitrogen triiodide
: Phosphorus pentachloride
: Dinitrogen pentoxide
Tetraphosphorus decasulfide:
Dihydrogen monoxide:
Carbon dioxide:
Quantitative Composition of Compounds and Mass Percent Analysis
Percent Composition by Mass:
The mass percentage of each element in a compound expresses the relative mass contribution of that element to the total mass of the compound.
Formula:
Due to mathematical rounding, individual element percentages in a compound may occasionally total between and .
Percent Composition Worked Examples:
Example 1: Percent Composition of and in Dinitrogen Tetroxide ():
Molar mass of Nitrogen ():
Molar mass of Oxygen ():
Total molar mass of :
Example 2: Percent Composition by Mass of Potassium Sulfate ():
Formula:
Potassium ():
Sulfur ():
Oxygen ():
Total molar mass of :
Sum check:
Chemical Formulas as Conversion Factors:
A chemical formula provides stoichiometric mole ratios between individual elements and molecules.
Example: In dichlorodifluoromethane (), the relationship is:
Dietary Intake Calculation (FDA Sodium Guideline):
Problem: The U.S. Food and Drug Administration (FDA) recommends consuming less than of sodium () per day. What mass of sodium chloride () in grams corresponds to this limit?
Molar mass of :
Molar mass of :
Molar mass of :
Calculation:
A person can consume at most of table salt per day while remaining within the sodium guideline.
Determination of Empirical and Molecular Formulas
Analytical Foundations:
Empirical formulas are determined experimentally through quantitative elemental analysis or percent composition obtained by decomposing a known compound or measuring its reaction products.
Compounds with identical empirical formulas possess identical mass percentages of elements.
Comparison: (Molecule I), (Molecule II), and (Molecule III).
Molecules I and II share the identical empirical formula (and consequently share identical percent composition: approximately and ).
Step-by-Step Empirical Formula Determination:
Assume a 100-gram sample: Convert given mass percentages directly into grams (e.g., ).
Convert grams to moles: Divide the mass of each element by its corresponding elemental molar mass ().
Establish a pseudo-formula and divide by the smallest mole value: Divide all calculated mole values by the lowest molar quantity to yield relative atomic subscripts. If a subscript is within of an integer, round directly to that whole number.
Clear non-integer fractional subscripts: If remaining subscripts end in common decimal fractions, multiply all subscripts in the formula by the corresponding integer factor:
Subscript Multiplier Table:
Empirical Formula Worked Laboratory Problems:
Problem 1: Phosphorus Oxide Decomposing to Phosphorus and Oxygen:
Assume : and .
Convert to moles:
Divide by smallest value ():
Clear fraction ():
Empirical Formula:
Problem 2: Manganese Sulfide Containing Sulfur by Mass:
Find percent Manganese (): .
Assume : and .
Convert to moles:
Divide by smallest value ():
Clear fraction ():
Empirical Formula:
Determining Molecular Formula from Empirical Formula and Molar Mass:
The molecular formula is always an integer multiple () of the empirical formula:
The integer factor is calculated from the ratio of experimental molar mass to the calculated empirical formula molar mass:
Worked Example: Butanedione (Flavor Component of Butter and Cheese):
Given: Empirical formula is , and experimental molar mass is .
Calculate empirical formula mass for :
Calculate integer multiplier :
Apply multiplier to empirical subscripts:
Molecular Formula: