E078 Section 5 Notes – Differential Equations
Source: Condensed from the Section 5 Study Guide (zyBooks 5.1–5.4). Not official WGU material.
Big idea. A differential equation (DE) tells you how a quantity changes; solving it means finding the quantity itself. Section 5.1 covers what a solution is and how an initial value picks one solution out of a family; 5.2 shows how to see solutions without solving (direction fields, equilibria) and approximate them (Euler's method); 5.3 solves exactly when you can separate and ; 5.4 is the logistic model, a separable DE for populations with a ceiling.
5.1 Basics of Differential Equations
Big idea
A differential equation is an equation with an unknown function and one or more of its derivatives.
A solution is a function that makes the equation true when you plug it (and its derivatives) in.
The order is the highest derivative that appears. is still order 1: a power is not a derivative.
The general solution is the whole family (it has a ). A particular solution is one member.
An initial-value problem (IVP) is a DE plus initial value(s). You need as many initial values as the order.
To solve : integrate both sides, then use the initial value to find .
Formulas
Verify a solution: compute (and if needed), substitute into the left side, simplify, compare to the right side.
Falling/thrown objects (only gravity, m/s per second, up is positive):
Worked example
Verify: is a solution of ? Compute , then . Yes.
IVP: , . Integrate: ; then , so . Answer: .
Thrown ball: thrown upward from 2 m at 14.7 m/s. , . Highest point when : s, so m.
Common mistakes
Calling "order 2". Order counts derivatives, not powers.
Forgetting before using the initial value, or plugging the initial value in before integrating.
Sign of gravity: with "up is positive," acceleration is . A negative velocity means falling.
5.2 Direction Fields and Numerical Methods
Big idea
For , plug a point into the right side: that number is the slope of the solution through that point.
A direction (slope) field is a grid of little segments with those slopes. A solution curve follows the segments.
An equilibrium solution is a constant solution . Find it by setting the right side (for all ).
Stability (look just above and just below ): stable means both sides move toward ; unstable means both sides move away; semi-stable means one side toward, one side away.
Euler's method: walk along tangent lines in steps of size . Smaller means more work but more accuracy.
Formulas
Euler: ,
Stability by sign chart: for , mark the zeros of on a number line and test a value in each interval. A means goes up (arrow up), a means goes down.
Worked example
Slope at a point: for , the slope at is .
Equilibria and stability: . Equilibria , . Signs: : (down); : (up); : (up). At below goes down and above goes up, both away, so unstable. At below goes up (toward) and above goes up (away), so semi-stable.
Euler, three steps: , , . ; ; . So . (Exact solution gives , so Euler undershoots a bit.)
Euler table habit: make columns , , , , . Filling a table stops you from mixing up which and go into .
Common mistakes
In Euler, using the new with the old . Both inputs to come from the previous row.
Calling an equilibrium stable just because solutions on one side approach it (that is semi-stable).
5.3 Separable Equations
Big idea
Separable means you can write : a function of times a function of .
Get all the 's with and all the 's with , then integrate both sides. One is enough.
Values with are constant solutions; check them first (dividing by loses them).
After exponentiating, is just a new constant; dropping the absolute value lets that constant be .
If you can't solve for , an implicit answer is fine.
Formulas
The 5 steps: (1) find -values with (constant solutions); (2) rewrite as ; (3) integrate both sides; (4) solve for if possible; (5) use the initial condition to find .
Mixing tank: , where rate in (concentration in)(flow in) and rate out .
Newton's law of cooling: , with for cooling or warming toward .
Worked example
General solution: . Constant solution . Separate: (and ).
IVP: , . , and . Take the positive root because : .
Mixing tank: a 200 L tank holds 10 kg of salt; brine at 0.25 kg/L flows in at 4 L/min and the mixture flows out at 4 L/min. Rate in kg/min, rate out , so , . Separating gives ; gives . Answer: ; long run kg.
Newton's cooling: coffee at in a room is after 10 min. ; . For : min.
Common mistakes
Trying to separate . A sum of and is not separable (it can't be written as ).
Writing . It's .
Taking the wrong square root sign: let the initial value decide.
5.4 The Logistic Equation
Big idea
Exponential growth grows forever. The logistic model adds a ceiling: the carrying capacity .
When is small, growth looks exponential. As , growth slows. Above , decreases toward .
Equilibria: (unstable) and (stable).
The curve is S-shaped, with an inflection point at : that's where growth is fastest.
It's separable (and autonomous), solved with partial fractions.
Formulas
Inflection (fastest growth): , , max rate
The inflection happens at a positive time only when . If there is no inflection point.
Worked example
Logistic population: , , . . Then . Fastest growth at , when .
Reading a logistic DE: , so and . Factor out to read off .
Common mistakes
Mixing up (the ceiling) and (the start).
Thinking the population reaches . It only approaches it as .
Using as a percent without converting: 12 percent means .
How the pieces connect
Every problem starts with the same triage question: just integrate (5.1), separable (5.3), logistic (5.4), or only approximate/describe (5.2)?
5.1's "integrate, then use the initial value to find " is step 3 and step 5 of the separable recipe in 5.3; separation just adds the step of moving the 's to the side first.
The equilibrium and sign-chart ideas from 5.2 explain the behavior of the exact solutions in 5.3 and 5.4: a mixing tank's and a logistic are both solutions drifting toward a stable equilibrium.
The logistic equation is a separable, autonomous DE, so 5.4 is 5.3's method (with partial fractions) applied to one important model, and its equilibria and follow from 5.2's sign chart.
Euler's method (5.2) is the fallback when a DE is not separable, such as ; it approximates the same solution curve that the direction field sketches.
Checklist
Find the order of a DE
Verify a function solves a DE / IVP
Solve with an initial value
Velocity and height of a thrown object
Compute slopes for a direction field
Find equilibria and classify stability
Run 3–5 steps of Euler's method
Solve a separable DE (general + IVP)
Set up and solve a mixing problem
Newton's cooling: find , then a time
Write and solve a logistic IVP
Find the logistic inflection point