AP Chemistry Chapter 6 & 17 Practice Test Flashcards
Thermodynamic Laws and Spontaneity of Systems
First Law of Thermodynamics (Conservation of Energy):
Energy cannot be created or destroyed in an isolated system; it can only change forms.
For any process occurring within a rigid, insulated, and sealed container, no heat (q=0) or work (w=0) is exchanged with the surroundings.
Consequently, the change in internal energy (ΔE or ΔU) for the isolated system is exactly zero, meaning the total energy remains constant (ΔE=0).
Second Law of Thermodynamics (Entropy of the Universe):
In any spontaneous process, the total entropy of the universe increases (ΔSuniv>0).
For an isolated system containing hot water and ice, heat spontaneously transfers from the warmer water molecules to the colder ice structure until thermal equilibrium is achieved.
This spontaneous redistribution and dispersal of thermal energy over a greater number of available microstates results in a net increase in total system entropy (ΔSsys>0).
Application Scenario: Ice Cube in Hot Water inside an Isolated System:
System setup: A cube of ice is added to hot water inside a rigid, insulated, and sealed container.
Energy behavior: Because the container prevents any heat exchange with the external environment (q=0) and cannot expand or contract (w=0), the total energy of the system remains constant.
Entropy behavior: Phase change (melting of solid ice to liquid water) combined with thermal equilibration disperse energy across more kinetic states, causing the total entropy to increase.
Reaction Favorability and Temperature Dependence
Gibbs Free Energy Equation:
Thermodynamic favorability (spontaneity) under constant temperature and pressure is governed by the Gibbs free energy change: ΔG∘=ΔH∘−TΔS∘
A reaction is thermodynamically favored when ΔG∘<0.
Four Combinations of Enthalpy (ΔH∘) and Entropy (ΔS∘):
Case 1: ΔH∘<0 (exothermic) and ΔS∘>0 (entropy increases).
ΔG∘<0 at all temperatures (always thermodynamically favored).
Example: 2N2O(g)→2N2(g)+O2(g) where ΔH∘=−164kJ/molrxn and ΔS∘=149J/(molrxn⋅K).
Case 2: ΔH∘>0 (endothermic) and ΔS∘<0 (entropy decreases).
ΔG∘>0 at all temperatures (never thermodynamically favored).
Example: PbCl2(s)→Pb2+(aq)+2Cl−(aq) where ΔH∘=23.4kJ/molrxn and ΔS∘=−12.5J/(molrxn⋅K).
Case 3: ΔH∘<0 (exothermic) and ΔS∘<0 (entropy decreases).
ΔG∘<0 at low temperatures (where ΔH∘ dominates).
ΔG∘>0 at high temperatures (where −TΔS∘ becomes a large positive term).
Example: 2CO(g)+O2(g)→2CO2(g) where ΔH∘=−566kJ/molrxn and ΔS∘=−173J/(molrxn⋅K).
Case 4: ΔH∘>0 (endothermic) and ΔS∘>0 (entropy increases).
ΔG∘>0 at low temperatures (unfavored because ΔH∘>0 dominates).
ΔG∘<0 at high temperatures (favored because −TΔS∘ becomes sufficiently negative to outweigh ΔH∘).
Example: 2H2O(g)→2H2(g)+O2(g) where ΔH∘=484kJ/molrxn and ΔS∘=90.0J/(molrxn⋅K).
Third Law of Thermodynamics Definition:
The entropy of a pure, perfectly crystalline substance at absolute zero (0K) is equal to zero (S=0).
At absolute zero, thermal motion ceases, and a perfect crystal possesses only one microstate (W=1), yielding S=kBln(1)=0.
Enthalpy, Hess's Law, and Heats of Formation
Calculation of Standard Reaction Enthalpy (ΔHrxn∘) from Standard Enthalpies of Formation (ΔHf∘):
Formula: ΔHrxn∘=∑nΔHf∘(products)−∑mΔHf∘(reactants)
Example Reaction: 3C2H2(g)→C6H6(g)
Data:
ΔHf∘[C2H2(g)]=230kJmol−1
ΔHf∘[C6H6(g)]=83kJmol−1
Step-by-step Calculation: ΔHrxn∘=[1×83kJmol−1]−[3×230kJmol−1] ΔHrxn∘=83−690=−607kJ
Applying Hess's Law to Multi-Step Reactions:
Principle: If a reaction can be expressed as the sum of two or more steps, the enthalpy change for the overall reaction is the sum of the enthalpy changes of the individual steps.
Given Reaction Steps:
21H2(g)+21I2(s)→HI(g)ΔH1=26kJ/molrxn
21H2(g)+21I2(g)→HI(g)ΔH2=−5.0kJ/molrxn
Target Process: Sublimation of iodine: I2(s)→I2(g)
Manipulation Strategy:
Multiply Reaction 1 by 2: H2(g)+I2(s)→2HI(g)ΔH=2×(26kJ/molrxn)=52kJ/molrxn
Reverse Reaction 2 and multiply by 2: 2HI(g)→H2(g)+I2(g)ΔH=−2×(−5.0kJ/molrxn)=+10.0kJ/molrxn
Add the manipulated steps: I2(s)→I2(g)ΔHsub=52+10.0=62kJ/molrxn
Stoichiometry and Limiting Reactants in Exothermic Reactions:
Reaction Context: Water added to sodium peroxide (Na2O2) and sulfur (S) produces sulfur dioxide (SO2).
Trial Comparison:
Trial 1: 7.8g of Na2O2(s) (molar mass=78g/mol, corresponding to 0.10mol) mixed with 3.2g of S(s) (0.10mol).
Trial 2: 7.8g of Na2O2(s) (0.10mol) mixed with 6.4g of S(s) (0.20mol).
Observation & Conclusion: Both trials yield the identical amount of SO2(aq). Doubling the mass of S without increasing Na2O2 does not increase product yield, proving Na2O2 is the limiting reactant in both trials.
Heat Released (q): Because the same amount of limiting reactant (0.10mol Na2O2) reacts in both trials, the heat released is identical (q=30.kJ).
Calorimetry, Specific Heat Capacity, and Thermal Equilibrium
Thermal Energy Transfer Principles:
In an insulated system, heat lost by warmer components equals heat gained by cooler components: qlost=−qgained
The heat transferred is given by: q=m⋅c⋅ΔT where m is mass, c is specific heat capacity, and ΔT=Tfinal−Tinitial.
Comparing Spoon Materials in Coffee Cups:

System Analysis: Four identical cups of hot coffee at the same initial temperature receive spoons made of different materials at an initial temperature of 20∘C.
Thermal Capacity (C=m⋅c) Calculations:
Cup A (Aluminum): C=10.0g×0.90J/(g⋅∘C)=9.0J/∘C
Cup B (Ceramic): C=10.0g×0.80J/(g⋅∘C)=8.0J/∘C
Cup C (Steel): C=20.0g×0.45J/(g⋅∘C)=9.0J/∘C
Cup D (Silver): C=40.0g×0.23J/(g⋅∘C)=9.2J/∘C
Equilibrium Temperature Determination: The spoon with the smallest total thermal capacity (C=8.0J/∘C, Ceramic in Cup B) absorbs the least total heat from the coffee to reach thermal equilibrium. Consequently, Cup B retains the highest coffee temperature at thermal equilibrium.
Metal-Water Mixture Conservation of Energy:
Setup: A 100g sample of metal at 100∘C is placed into 100g of water at 22∘C, reaching an equilibrium temperature of 35∘C.
Temperature Changes:
ΔTmetal=100∘C−35∘C=65∘C drop.
ΔTwater=35∘C−22∘C=13∘C rise.
Key Distinction: The metal experienced a much larger temperature change (65∘C) than the water (13∘C), but according to energy conservation in an insulated system, the metal lost the exact same amount of thermal energy as the water gained (qlost=qgained). This disparity in ΔT occurs because the metal has a significantly lower specific heat capacity (cmetal=0.20⋅cwater).
Heating Curves and Phase Transitions
Free Response: Decomposition of Dinitrogen Tetroxide
Chemical Reaction: N2O4(g)⇌2NO2(g)
Part (a)(i) Sign of ΔH∘:
Prediction: ΔH∘>0 (positive / endothermic).
Justification: Breaking the single N−N covalent bond in N2O4 requires energy input, and no new chemical bonds are formed in generating two separate NO2 molecules. Bond cleavage is intrinsically endothermic.
Part (a)(ii) Sign of ΔS∘:
Prediction: ΔS∘>0 (positive / entropy increases).
Justification: The reaction produces 2moles of gas from 1mole of gas reactant. Generating a greater number of gas molecules expands the number of available microstates and positional disorder of the system.
Part (b) Relationship Between ΔG∘ and Temperature:

Linear Analysis: Rearranging ΔG∘=ΔH∘−TΔS∘ into slope-intercept form (y=mx+b): ΔG∘=−(ΔS∘)T+ΔH∘
Graph Features:
Selected Graph: Graph 1 (a straight line with a positive vertical intercept that slants downward into negative ΔG∘ values as temperature increases).
Part (c) Thermal Shift and Equilibrium Constant Behavior:
(i) Concentration of N2O4 upon heating: Adding heat to an endothermic reaction (Heat+N2O4(g)⇌2NO2(g)) causes the equilibrium to shift to the right to consume the added thermal energy (Le Chatelier's Principle). As a result, N2O4 is consumed and its concentration decreases.
(ii) Value of Keq at 100∘C vs 25∘C: The value of Keq at 100∘C will be greater than 5.0×10−3. For an endothermic reaction, increasing temperature drives the system toward products, increasing the numerator in Keq=[N2O4][NO2]2.
Part (d) Magnitude Comparison of ΔH∘ vs TΔS∘ at 25∘C:
Given: Keq=5.0×10−3 at 25∘C (298K).
Analysis: Because Keq<1, ΔG∘ must be positive (ΔG∘>0) at 298K.
Algebraic Deduction: ΔG∘=ΔH∘−TΔS∘>0⟹ΔH∘>TΔS∘
Conclusion: ΔH∘ is greater than TΔS∘ at 25∘C.
Free Response: Iron Oxidation Hand Warmer Kinetics and Thermochemistry
Reaction Equation: 4Fe(s)+3O2(g)→2Fe2O3(s)ΔH298∘=−1650kJ/molrxn
Experimental Temperature Data Table:
Time 0min: 22.0∘C
Time 1min: 25.1∘C
Time 2min: 34.6∘C
Time 3min: 37.3∘C
Time 4min: 39.7∘C (maximum temperature)
Time 5min: 39.4∘C
Part (a) Heat Absorbed Calculation (0 to 4 minutes):
System parameters: Mixture total mass m=15.0g, specific heat capacity c=0.80J/(g⋅∘C).
Temperature rise: ΔT=39.7∘C−22.0∘C=17.7∘C.
Calculation: q=m⋅c⋅ΔT q=15.0g×0.80J/(g⋅∘C)×17.7∘C=212.4J=0.212kJ
Part (b) Mass of Reacted Iron (Fe):
Reaction enthalpy relationship: 1molrxn releases 1650kJ and consumes 4moles of Fe.
Moles of reaction: nrxn=1650kJ/molrxn0.2124kJ=1.287×10−4molrxn
Moles of Fe: nFe=4×(1.287×10−4mol)=5.149×10−4molFe
Mass of Fe: Mass=5.149×10−4mol×55.85g/mol=0.0288gFe
Part (c) Effect of Doubling Iron Mass on Maximum Temperature:
Prediction: The maximum temperature reached will be greater than in the first experiment.
Justification: Doubling the mass of limiting reactant (Fe) doubles the heat generated (q). However, because the sand and catalyst mass remain constant, the total mass mtotal of the reaction mixture does not double (it increases by less than a factor of 2). Because ΔT=mtotal⋅cq, doubling q while increasing mtotal by a smaller ratio results in a larger net temperature change ΔT, producing a higher maximum temperature.