Disease + Sources & Resources + Materials
I can define key terms such as disease, pathogen, infectious and non-infectious.
Disease: A condition that affects how the body functions and causes harm or illness (asthma)
Pathogen: A microorganism or infectious agent that causes disease or infections (salmonella)
Infectious Disease: Caused by a pathogen that can spread between organisms (influenza)
Non-infectious Disease: Not caused by a pathogen and cannot be spread from person to person (diabetes)
I can recall six types of pathogens along with their key features and examples of diseases they cause.
Prions: Abnormal, infectious proteins that convert normal protein to be abnormal (CJD, Kuru)
Viruses: Small infectious agents made of genetic material (DNA or RNA) inside a protective protein coat (Influenza, COVID-19)
Bacteria: Single-celled microorganisms that can cause disease (Tuberculosis, Scarlet fever)
Protozoa: Microscopic, single-celled organisms usually found within the host’s body (Malaria, toxoplasmosis)
Fungi: Parasitic organisms that can grow inside living organisms and cause infection. (Tinea, Thrush)
Macroparasites: Larger parasites that live in or on a host and obtain nutrients from it. (ringworm, tapeworms)
I can compare the features of epidemics, pandemics and endemic diseases.
Epidemics: A sudden increase in disease cases above the expected level in a certain population or area. (ebola, measles)
Pandemics: An epidemic that spreads across many countries or continents (COVID-19, Spanish Flu)
Endemic: A disease that is constantly present in a certain area or population at a predictable level (malaria, chickenpox)
I can describe examples of non-infectious disease and ways to reduce their incidence
Examples: cancer, cardiovascular disease, diabetes and genetic disorders.
Ways to reduce: Through healthy eating, regular physical activity, avoiding smoking, limiting risk factors and having regular health checks.
I can analyse data and modelling relating to the spread of infectious diseases.
Factors affecting the spread of infectious disease: number of contacts, population density, immunity and vaccination rates.
I can describe how the body prevents the entry of pathogens and how it responds to pathogens that enter the body.
(preventing) First line defense: The use of physical and chemical barriers that block or trap pathogens before they can cause an infection
Physical:
Skin: closely packed cells stop them from entering, dry and strong
Mucous: Traps unwanted pathogens due to sticky consistency
Cilia: Traps pathogens till they can be coughed or sneezed out
Chemical:
Stomach Acid: Very acidic, kills pathogens
Tears: Contain antimicrobial properties and flush them out
(responding) Second line defense: Non-specific immune response that attacks pathogens that enter the body. Includes phagocytes, which engulf and destroy pathogens, and inflammation. Immune responses are: fever, inflammatory response etc
Phagocytosis:
The phagocyte identifies that a pathogen is present and then engulfs it
The pathogen is surrounded by a membrane and forms a vesical the lysosome is also in engulfed by the vesical
The lysosome breaks down and destroys the pathogen which is then expelled from the phagocytes.
Third Line defense: Is specific, meaning it targets particular pathogens.
White blood cells spot antigens on the surface of the invading pathogen.
B cells find a specific anti-body to send down and bind to antigen
Antibody binds to antigen
T cells help coordinate the immune response or destroy infected cells
Some cells become memory cells which allow the body to respond faster if the same pathogen enters again.
I can explain how vaccination stimulates the immune system to fight infection.
Vaccines expose the immune system to harmless pathogen material, allowing it to produce antibodies and immune memory.
Immune memory allows the body to recognise a pathogen quickly and produce a faster, stronger response if exposed again
I can analyse data about immunisation.
Immunisation is the process of becoming protected against a disease, usually through vaccination.
I can outline examples of Aboriginal and/or Torres Strait Islander Peoples’ use of plants to prevent or control disease.
• Tea Tree: Crushed leaves are applied directly to wounds as an antiseptic or inhaled to treat respiratory infections and colds.
• Eucalyptus: Leaves are infused in hot water to create a steam inhalation that relieves congestion, coughs, and fever.
I can outline examples of medical technological advances developed in Australia.
The Cochlear Implant: Developed in 1978 and electronically stimulates the auditory nerve to provide a sense of sound
Spray-on Skin: Invented in 1992 and it uses a sample of a patient's healthy skin cells to create a solution that is sprayed over major burn wounds, to reduce healing time and scarring.
I can describe the difference between renewable and non-renewable resources.
Renewable: A resource that is naturally replenished at a similar rate to which it is used.
Examples: sunlight, wind, water, biomass.
Non-renewable: A resource that forms extremely slowly and exists in limited amounts.
Examples: coal, oil, natural gas and mineral ores.
I can identify the finite nature of the minerals and resources extracted in Australia.
Finite means there is a limited amount of a resource available, so it can eventually run out.
Why are Australia's mineral resources finite?
Mineral ores take millions of years to form, so they cannot be replaced as quickly as humans extract them.
I can identify products made from fossil fuels and how hydrocarbons can be separated from crude oil for a variety of uses.
What are fossil fuels: Non-renewable fuels formed from the remains of ancient organisms over millions of years.
Examples: coal, crude oil and natural gas.
What products are made from crude oil: Petrol, diesel, jet fuel, lubricants, bitumen and chemicals used to make plastics.
How are hydrocarbons separated from crude oil: By fractional distillation, which separates hydrocarbons based on their different boiling points.
How does fractional distillation work: Crude oil is heated → hydrocarbons vaporise → vapours rise through a column → they condense at different temperatures → different fractions are collected.
I can identify and reproduce the structure of simple alkanes.
I can describe the differences between complete and incomplete combustion reactions of hydrocarbons.
What is complete combustion: A hydrocarbon burns with enough oxygen, producing carbon dioxide + water + energy.
What is incomplete combustion: A hydrocarbon burns with limited oxygen, producing carbon monoxide and/or carbon + water + less energy.
I can use examples from everyday applications to compare the products of the combustion reaction and the amount of energy released.
Why is combustion useful: Combustion releases energy used for heating, cooking, transport and electricity generation.
What are the products of complete combustion: Carbon dioxide (CO₂) + water (H₂O) + energy
Why does incomplete combustion release less energy: The fuel is not completely oxidised, so less of its chemical energy is released.
I can identify the metals produced from Australian mineral ores and explain the processes by which they are extracted.
How is iron extracted?
Iron ore → iron oxide → heated with carbon in a blast furnace → carbon removes oxygen → iron is produced.
How is copper extracted?
Copper ore is processed and commonly smelted, then copper can be purified using electrolysis.
I can identify some of the uses of the metals produced from Australian mineral ores.
What is iron/steel used for?
Buildings, bridges, vehicles, tools, machinery and construction.
What is aluminium used for?
Aircraft, cans, foil, buildings and electrical applications. It is lightweight and corrosion-resistant.
What is copper used for?
Electrical wiring, electronics, plumbing and motors because it is a good electrical conductor.
I can evaluate the environmental impact of extracting and using resources.
What are the environmental impacts of mining?
Habitat destruction
Soil erosion
Water pollution
Air pollution
Waste
Greenhouse gas emissions
What are the environmental impacts of using fossil fuels:
Burning fossil fuels releases CO₂ and other pollutants, contributing to climate change and air pollution.
How can resource use become more sustainable?
Reduce, reuse and recycle, reduce waste, use renewable energy and rehabilitate mined areas.
I can explain how Aboriginal and Torres Strait Islander Peoples use minerals and resources for a wide range of purposes.
What is ochre and how is it used: Ochre is a natural mineral pigment used in artwork, body decoration and important cultural practices.
Resin: for waterproofing and repairs
I can use valency to describe the number of electrons an atom needs to gain, lose, or share to achieve a stable electron configuration.
I can use models to describe the formation of cations and anions and explain noble gas electron configuration.
I can describe ionic bonds and construct chemical formulas of some common ionic compounds.
I can identify that the formation of ionic bonds allows each ion to achieve stable noble gas configuration.
I can describe covalent bonds and construct chemical formulas of some common covalent compounds.
I can recognise that some elements exist as diatomic molecules.
I can describe metallic bonds and explain how these bonds give metals their characteristics.