Chp. 11 Comprehensive Study Guide to the Muscular System: Fascicle Arrangement, Levers, and Functional Anatomy, and Terminology
Arrangement of Fascicles in Skeletal Muscle
Fascicle Organization: Skeletal muscle fibers are organized into bundles known as fascicles.
Classification Basis: Muscles are classified into four primary patterns based on the arrangement of these fascicles:
Parallel muscles
Convergent muscles
Pennate muscles
Circular muscles
Parallel Muscles
Structural Alignment: In parallel muscles, the fascicles run parallel to the long axis of the muscle.
Anatomy of Cylindrical Muscles: These muscles typically possess a central body, also referred to as the belly.
Tension Generation: The amount of tension developed during a muscle contraction is directly dependent on the total number of myofibrils present. Myofibrils are the contractile organelles within the muscle fiber.
Convergent Muscles
Fiber Pattern: Muscle fibers in a convergent arrangement spread out broadly like a fan and converge toward a single attachment site.
Attachment Points: The muscle may pull on a tendon or an aponeurosis.
Functional Versatility: Because the fibers converge, they can pull in different directions depending on which portions of the muscle are active.
Performance Characteristics: These muscles offer a broad range of movements and can generate a significant amount of tension due to the large total number of muscle fibers involved.
Pennate Muscles
Angular Alignment: Muscle fibers in pennate muscles pull at an angle relative to the tendon, rather than parallel to it.
Subclassifications of Pennate Muscles:
Unipennate: All fascicles are located on the same side of the tendon, resulting in a feather-like appearance.
Bipennate: Fascicles are positioned on both sides of a central tendon.
Multipennate: The tendon branches within the muscle, with fascicles arranged around these branches.
Circular Muscles (Sphincters)
Anatomical Role: These muscles surround body openings.
Mechanism of Action: Contraction of a circular muscle decreases the diameter of the opening, a process known as constriction.
Physiological Examples: They act as valves within the digestive and urinary tracts to control the passage of materials.
Muscle and Bone Interactions: Lever Systems
Mechanical Principles: Muscles act on bones, which function as levers.
Fulcrum: A lever moves on a fixed point called a fulcrum. In the human body, every joint serves as a fulcrum.
Forces: Movement occurs when muscles apply a force to overcome a load, also known as resistance.
First-Class Lever:
Configuration: The fulcrum lies between the applied force and the load.
Metaphor: Works similarly to a pry bar.
Anatomical Example: The extension of the neck.
Second-Class Lever:
Configuration: The load lies between the applied force and the fulcrum.
Metaphor: Works similarly to a wheelbarrow.
Mechanical Advantage: A small applied force is capable of moving a large weight.
Anatomical Example: Ankle extension (plantar flexion) performed by the calf muscles.
Third-Class Lever:
Configuration: The applied force is located between the load and the fulcrum.
Metaphor: Works similarly to a pair of tongs.
Prevalence: This is the most common lever system found in the human body.
Functional Trade-off: This system maximizes the speed and the distance traveled by the load, though this occurs at the expense of the magnitude of the applied force.
Anatomical Examples: Elbow flexion, knee flexion and extension, and arm abduction.
Muscle Attachments: Origin and Insertion
Origin: Defined as the fixed point of attachment of a muscle to a bone.
Insertion: Defined as the moveable point of attachment of a muscle to a bone.
Positional Relationship: Usually, the origin is proximal to the insertion.
Functional Groups of Muscles
Agonists (Prime Movers): These are the muscles that provide the primary major force required to produce a specific movement.
Antagonists: These muscles oppose or reverse the movement initiated by a prime mover. Interestingly, antagonists can also act as prime movers for the opposing motion.
Example Pair: The Biceps brachii and the Triceps brachii.
Synergists: These muscles assist prime movers in two specific ways:
Promoting the same movement.
Reducing undesirable or unnecessary movements that might occur when a prime mover contracts.
Fixators: These are a specialized type of synergists that immobilize a bone or multiple bones.
Function: They include muscles that serve to maintain an upright posture.
Naming Conventions for Skeletal Muscles
Location: Indicates the specific bone or body region associated with the muscle.
Examples: Frontalis, Intercostal, Rectus abdominis.
Action: Indicates the specific movement the muscle performs.
Examples: Flexor carpi ulnaris, Adductor magnus.
Shape: Some muscles are named based on a recognizable geometric shape.
Examples: Deltoid (triangular), Trapezius.
Direction of Muscle Fibers: Based on the orientation of the fibers relative to the long axis of the body.
Rectus: Fibers run parallel to the long axis (e.g., Rectus abdominis).
Transversus: Fibers run at right angles to the long axis (e.g., Transversus abdominis).
Oblique: Fibers run diagonally to the long axis (e.g., External oblique).
Relative Size: Muscles are named based on their size relative to other muscles that perform the same action.
Examples: Gluteus maximus, Gluteus medius, and Gluteus minimus; Peroneus longus and Peroneus brevis.
Number of Origins: Named based on having more than one location of origin.
Examples: Biceps brachii (2 origins), Triceps brachii (3 origins).
Origin and/or Insertion Points: Named according to the specific attachment points.
Rule: The origin is always named first in the sequence.
Examples: Sternocleidomastoid, Flexor carpi ulnaris.
Overview of Muscle Actions
Definition: Muscle actions are the movements produced by the contraction of a muscle.
Common Action Types: Adduction, elevation, pronation, and others.
Description Methods: Actions are described based on their effect on a bone or a joint.
Example: Flexion of the forearm or flexion at the elbow.
Specific Functional Pairings and Locations
Flexion and Extension:
General Rule: In most instances, flexors are located anteriorly, while extensors are located posteriorly.
Exceptions: The quadriceps and hamstrings are exceptions to the anterior/posterior rule.
Antagonistic Relationship: Flexors and extensors operating on the same joint act as antagonists.
Example Pairs: Biceps brachii vs. triceps brachii; Hamstrings vs. quadriceps.
Abduction and Adduction:
General Rule: Abductors are located toward the lateral side of the body, whereas adductors are located on the medial side.
Antagonistic Relationship: Abductors and adductors working on the same joint act as antagonists.
Relative Strength: Abduction is generally a weaker motion compared to adduction.
Example Pairs: Thigh abductors vs. thigh adductors; Deltoid vs. latissimus dorsi and pectoralis major.
Rotation:
Location Patterns: Lateral rotators are typically found on the lateral and posterior sides of the body. Medial rotators are generally found on both the medial and lateral sides.
Shoulder Example: Teres minor (lateral rotator) vs. subscapularis (medial rotator).
Hip Example: Piriformis (lateral rotator) vs. gluteus minimus (medial rotator).