Comprehensive Study Guide: Differential Geometry of Curves and Surfaces

Smooth Plane Curves and Moving Frames
  • Definition of a Plane Curve: A smooth parametrized curve α:I→R2\alpha: I \to \mathbb{R}^2 is classified as a plane curve. It is considered regular if the derivative α′(t)≠0\alpha'(t) \neq 0 for all t∈It \in I. For such curves, we define the unit tangent vector as: T(t)=α′(t)∥α′(t)∥T(t) = \frac{\alpha'(t)}{\|\alpha'(t)\|}

  • The Unit Normal Vector: The unit normal vector N(t)N(t) is defined by rotating the unit tangent vector T(t)T(t) by π2\frac{\pi}{2} radians counterclockwise. If T(t)=(x(t),y(t))T(t) = (x(t), y(t)), then N(t)=(−y(t),x(t))N(t) = (-y(t), x(t)).

  • Adapted Moving Frame: The pair {T(t),N(t)}\{T(t), N(t)\} constitutes an adapted moving frame along the curve α\alpha, providing an orthonormal basis at each point.

  • Curvature Function: Using arc length parametrization ss, we observe that T(s)⋅T(s)=1T(s) \cdot T(s) = 1, which implies T′(s)⋅T(s)=0T'(s) \cdot T(s) = 0. Since N(s)N(s) is orthogonal to T(s)T(s), there exists a function κ(s)\kappa(s) such that: T′(s)=κ(s)N(s)T'(s) = \kappa(s)N(s) The scalar κ(s)\kappa(s) is the signed curvature function.

  • Geometric Interpretation:

    • Positive Curvature (κ>0\kappa > 0): The curve is turning to the left.

    • Negative Curvature (κ<0\kappa < 0): The curve is turning to the right.

    • Unsigned Curvature: Defined as ∥κ∥=∥T′(s)∥\|\kappa\| = \|T'(s)\|.

Frenet-Serre Equations for Plane Curves
  • Moving Frame Equations: The derivatives of the moving frame are described by the system: {T′(s)=κ(s)N(s)N′(s)=−κ(s)T(s)\begin{cases} T'(s) = \kappa(s)N(s) \\ N'(s) = -\kappa(s)T(s) \end{cases} This can be written in matrix form as F′(s)=A(s)F(s)F'(s) = A(s)F(s) where A=(0κ−κ0)A = \begin{pmatrix} 0 & \kappa \\ -\kappa & 0 \end{pmatrix}.

  • Example: The Circle: For a circle of radius rr parametrized by α(t)=(rcos⁡(t),rsin⁡(t))\alpha(t) = (r \cos(t), r \sin(t)), calculations show that the curvature is a constant κ=1r\kappa = \frac{1}{r}. Conversely, the radius of curvature is R=1∥κ∥R = \frac{1}{\|\kappa\|}.

  • Vanishing Curvature: A curve has κ=0\kappa = 0 everywhere if and only if it is a segment of a straight line.

Fundamental Theorem of Plane Curves
  • Existence and Uniqueness: Given a smooth function κ:I→R\kappa: I \to \mathbb{R}, there exists a smooth plane curve α\alpha having κ\kappa as its signed curvature. This curve is unique up to rigid motions (rotation and translation) in the plane R2\mathbb{R}^2.

  • Computation via General Parameter: For a curve α(t)=(x(t),y(t))\alpha(t) = (x(t), y(t)) with an arbitrary parameter tt, the curvature is computed as: κ(t)=x′(t)y′′(t)−y′(t)x′′(t)(x′(t)2+y′(t)2)3/2\kappa(t) = \frac{x'(t)y''(t) - y'(t)x''(t)}{(x'(t)^2 + y'(t)^2)^{3/2}}

Theory of Space Curves
  • Definition: A space curve is a smooth regular mapping α:I→R3\alpha: I \to \mathbb{R}^3. The unit tangent remains T=α′∥α′∥T = \frac{\alpha'}{\|\alpha'\|} .

  • Curvature in 3D: Defined as κ(s)=∥T′(s)∥\kappa(s) = \|T'(s)\|. Note that in 3D, curvature is non-negative by definition.

  • Principal Normal and Binormal:

    • Principal Normal (NN): If κ≠0\kappa \neq 0, then N=T′κN = \frac{T'}{\kappa}.

    • Binormal (BB): Defined by the cross product B=T×NB = T \times N.

  • Frenet-Serre Frame: The triple {T,N,B}\{T, N, B\} forms an oriented orthonormal basis. The governing differential equations are: {T′=κNN′=−κT+τBB′=−τN\begin{cases} T' = \kappa N \\ N' = -\kappa T + \tau B \\ B' = -\tau N \end{cases}

  • Torsion (τ\tau): The function τ(s)\tau(s) measures how much the curve twists out of the osculating plane (the plane spanned by TT and NN). A curve is planar if and only if τ=0\tau = 0 identically.

  • Example: The Helix: For α(t)=(acos⁡(t),asin⁡(t),bt)\alpha(t) = (a \cos(t), a \sin(t), bt), the curve has constant curvature κ=aa2+b2\kappa = \frac{a}{a^2 + b^2} and constant torsion τ=ba2+b2\tau = \frac{b}{a^2 + b^2}.

General Theory of Surfaces
  • Topological and Smooth Definition: A surface S⊂R3S \subset \mathbb{R}^3 is a 2D topological submanifold. A local parametrization is a mapping x:U→S∩Vx: U \to S \cap V where U⊂R2U \subset \mathbb{R}^2 is open.

  • Smoothness Conditions: The mapping x(u,v)x(u, v) must be smooth, and its inverse must be the restriction of a smooth map.

  • Regularity: The vectors xux_u and xvx_v (partial derivatives) must be linearly independentateverypoint,independent at every point, meaning xu×xv≠0x_u \times x_v \neq 0. This ensures the existence of a tangent plane.

  • Surface Examples:

    • Graphs: z=g(u,v)z = g(u, v). This is always a surface if gg is smooth.

    • Sphere: Defined by x2+y2+z2=r2x^2 + y^2 + z^2 = r^2, which can be covered by several coordinate charts (e.g., stereographic projection or hemispherical projections).

    • Surfaces of Revolution: Generated by rotating a plane curve α(u)=(f(u),0,g(u))\alpha(u) = (f(u), 0, g(u)) around the zz-axis. The resulting surface is given by x(u,v)=(f(u)cos⁡(v),f(u)sin⁡(v),g(u))x(u, v) = (f(u) \cos(v), f(u) \sin(v), g(u)).

Tangent Spaces and Fundamental Forms
  • Tangent Plane (TpST_p S): The set of all tangent vectors to curves on SS passing through pp. It is spanned by the basis {xu,xv}\{x_u, x_v\}.

  • First Fundamental Form: The metric on the surface, defined as the restriction of the Euclidean dot product to the tangent plane. In coordinates, it is expressed as: I=Edu2+2Fdudv+Gdv2I = E du^2 + 2F dudv + G dv^2 Where:

    • E=⟨xu,xu⟩E = \langle x_u, x_u \rangle

    • F=⟨xu,xv⟩F = \langle x_u, x_v \rangle

    • G=⟨xv,xv⟩G = \langle x_v, x_v \rangle

  • Intrinsic Properties: Quantities that depend only on E,F,GE, F, G (and not the embedding in R3\mathbb{R}^3) are called intrinsic. These include curve lengths, angles between curves, and surface area.

  • Area Element: The area of a region RR is given by: Area(R)=∬UEG−F2dudv\text{Area}(R) = \iint_U \sqrt{EG - F^2} du dv

Second Fundamental Form and Surface Curvature
  • Gauss Map (NN): A map N:S→S2N: S \to S^2 defined by the unit normal vector N=xu×xv∥xu×xv∥N = \frac{x_u \times x_v}{\|x_u \times x_v\|}.

  • Weingarten Map (Shape Operator): The differential of the Gauss map Lp=−dNp:TpS→TpSL_p = -dN_p: T_p S \to T_p S. This map is self-adjoint.

  • Second Fundamental Form: Defined by IIp(w)=⟨Lpw,w⟩II_p(w) = \langle L_p w, w \rangle. In coordinates: II=Ldu2+2Mdudv+Ndv2II = L du^2 + 2M dudv + N dv^2 Where coefficients are given by L=⟨xuu,N⟩L = \langle x_{uu}, N \rangle, M=⟨xuv,N⟩M = \langle x_{uv}, N \rangle, and N=⟨xvv,N⟩N = \langle x_{vv}, N \rangle.

  • Gaussian and Mean Curvatures:

    • Gaussian Curvature (KK): The determinant of the Weingarten map, K=κ1κ2K = \kappa_1 \kappa_2. In coefficients: K=LN−M2EG−F2K = \frac{LN - M^2}{EG - F^2}.

    • Mean Curvature (HH): Half the trace of the Weingarten map, H=κ1+κ22H = \frac{\kappa_1 + \kappa_2}{2}. In coefficients: H=EN−2FM+GL2(EG−F2)H = \frac{EN - 2FM + GL}{2(EG - F^2)}.

Classification of Points on a Surface
  • Elliptic Point: K>0K > 0. Both principal curvatures have the same sign. The surface locally lies on one side of the tangent plane (e.g., sphere).

  • Hyperbolic Point: K<0K < 0. Principal curvatures have opposite signs. The surface is saddle-shaped (e.g., hyperbolic paraboloid).

  • Parabolic Point: K=0K = 0 but dN≠0dN \neq 0. One principal curvature is zero (e.g., cylinder).

  • Planar Point: dN=0dN = 0. Both principal curvatures are zero.

  • Umbilical Point: A point where κ1=κ2\kappa_1 = \kappa_2. A connected surface consisting entirely of umbilical points is part of a plane or a sphere.

Theorema Egregium and Geodesics
  • Theorema Egregium (Gauss): Despite being defined via the normal vector, Gaussian curvature KK is an intrinsic property. It depends only on the coefficients of the First Fundamental Form and their derivatives.

  • Christoffel Symbols (Γijk\Gamma_{ij}^k): These symbols represent the tangential components of the second derivatives of the parametrization xijx_{ij}. They are computed entirely from E,F,GE, F, G and their derivatives.

  • Geodesics: Curves α(s)\alpha(s) on a surface such that their acceleration α′′(s)\alpha''(s) is always normal to the surface (geodesic curvature κg=0\kappa_g = 0). Straight lines in the plane and great circles on a sphere are geodesics. The geodesic equations are given by: d2ukds2+∑i,jΓijkduidsdujds=0\frac{d^2 u^k}{ds^2} + \sum_{i,j} \Gamma_{ij}^k \frac{du^i}{ds} \frac{du^j}{ds} = 0

  • Isometries: A map between surfaces that preserves the First Fundamental Form.( a mapping between two surfaces(spaces) is an isometry. it dictates that any measurments of arc lenghts,angles and areas remain completely unchanged when moving from one surfaceBy the Theorema Egregium, isometries must preserve Gaussian curvature.

  • Conformal Maps: Maps that preserve angles between curves but not necessarily lengths. A parametrization is isothermal if F=0F=0 and E=GE=G.

Questions & Discussion
  • Curvature and Centrifugal Acceleration: The speaker notes that up to a factor, curvature κ\kappa corresponds to centrifugal acceleration when traveling at unit speed (s=ts = t).

  • Uniqueness of Space Curves: Like plane curves, space curves are unique up to rigid motion if both curvature κ(s)>0\kappa(s) > 0 and torsion τ(s)\tau(s) are specified.

  • Gauss Map Surjectivity: For a compact surface in R3\mathbb{R}^3, the Gauss map N:S→S2N: S \to S^2 is surjective, and there exists at least one elliptic point where the surface is most "curved" outward.

    • Line of Curvature: A curve whose tangent at every point is a principal direction. Rodrigues' Theorem states α\alpha is a line of curvature if and only if N′(α(t))=−λ(t)α′(t)N'(\alpha(t)) = -\lambda(t) \alpha'(t).

    • Asymptotic Curves: Curves along which the normal curvature is zero (II=0II = 0). These only exist in regions where $$K \le