Linear momentum p of an object of mass m moving with a velocity v is defined as the mathematical product of its mass and velocity:
p=mv
SI units for linear momentum are kilogram meters per second (kg⋅m/s or kgm/s).
Momentum is a vector quantity; its direction is identical to the direction of the velocity vector v.
For two-dimensional motion in a Cartesian coordinate system, momentum is resolved independently along its coordinate axes:
px=mvxpy=mvy
Changing an object's momentum requires the application of a net external force.
The time rate of change of linear momentum equals the net resultant force acting on the body:
ΔtΔp=Δtm(vf−vi)=Fnet
This expression provides an alternative and more fundamental statement of Newton's second law of motion.
When a single constant force F acts upon an object over a finite time duration Δt, the impulse I delivered to the body is defined as:
I=FΔt
Impulse is a vector quantity that points in the exact same direction as the applied net force vector F.
The Impulse-Momentum Theorem states that the impulse delivered to an object is equal to the resulting change in the object's momentum:
I=FΔt=Δp=mvf−mvi
In physical situations where the applied force varies over time rather than remaining constant, the average net force Fˉ applied over the time interval Δt is used in the theorem.
Worked Example: Impulse on a Trailer
Problem Statement: A resultant force of 150N acts on a 300kg trailer. Calculate how long it takes this force to change the trailer's velocity from 2m/s to 6m/s in the same direction.
Identified Parameters:
Mass: m=300kg
Resultant net force: Fn=150N
Initial velocity: u=2m/s
Final velocity: v=6m/s
Derivation and Calculation:
Apply the impulse-momentum theorem relating net force to momentum change:
FnΔt=ΔpFnΔt=m(v−u)
Solve algebraically for the elapsed duration Δt:
Δt=Fnm(v−u)
Substitute the numerical values:
Δt=150N(300kg)(6m/s−2m/s)=150N(300kg)(4m/s)=8s
The force requires an interval of 8s to produce the specified velocity increase.
Impulse Applied to Automobile Safety
In automotive collisions, the critical parameter governing injury severity and mortality is the collision time Δt, which is the duration required for an occupant to come completely to rest.
Because the occupant's momentum change Δp is predetermined by vehicle speed and occupant mass, extending the collision time Δt significantly reduces the magnitude of the net impact force Fnet=ΔtΔp acting upon the human body, lowering the risk of fatal trauma.
Primary passive safety devices engineered to prolong this stopping time interval include seat belts and air bags.
Air bags improve vehicle occupant safety through specific physical mechanisms:
Extending Collision Time: Deploying cushions prolong deceleration time, which attenuates the average force delivered to the occupant.
Energy Absorption: The inflating bag absorbs a substantial portion of the occupant's translational kinetic energy.
Area Distribution: Spreading the contact force over a wider anatomical surface area substantially reduces the localized pressure:
Pressure=AreaForce
Injury Mitigation: The broader, cushioned surface prevents localized puncture wounds and reduces focal mechanical stresses against rigid structures such as the dashboard and steering column.
Conservation of Linear Momentum
An isolated system is defined as a bounded physical system that experiences no net external forces (∑Fext=0).
The principle of conservation of linear momentum states that when no external forces act on a system of colliding objects, the total momentum of the system remains constant over time.
Under an isolated framework, the total vector momentum before a collision is identical to the total vector momentum after the collision:
pinitial=pfinal
For an isolated two-body interaction, this conservation law is expressed mathematically as:
m1v1i+m2v2i=m1v1f+m2v2f
Collisions may result from direct mechanical contact between bodies or from contactless interactions, such as electrostatic repulsive forces between outer orbital electrons in the surface atoms of the bodies.
The conservation principle applies strictly to the overall system rather than to individual isolated constituent objects; while individual velocities and momenta change, the total sum is invariant.
During a collision, internal interaction forces between the colliding bodies are significantly larger than ambient non-isolated external forces, making internal force dynamics the governing factor over brief collision intervals.
The conservation law generalizes to any arbitrary number N of interacting bodies:
∑k=1Nmkvki=∑k=1Nmkvkf
Because momentum is a vector quantity, calculations require careful tracking of algebraic signs corresponding to coordinate directions.
Classification of Collisions in One Dimension
Physical collisions are categorized into three primary classes based on energy conservation and geometry:
Elastic Collisions: Collisions in which both total linear momentum and total kinetic energy are strictly conserved.
Inelastic Collisions: Collisions in which total linear momentum is conserved, but kinetic energy is not conserved. Kinetic energy is transformed into other energy forms, including thermal internal energy, sound emissions, or mechanical work required to permanently deform the interacting bodies.
Glancing Collisions: Multi-dimensional oblique collisions where post-impact trajectories diverge across two or three spatial dimensions.
One-Dimensional Elastic Collisions
In a perfectly elastic one-dimensional collision, two governing equations apply simultaneously:
Conservation of Linear Momentum:m1v1i+m2v2i=m1v1f+m2v2f
Conservation of Kinetic Energy:21m1v1i2+21m2v2i2=21m1v1f2+21m2v2f2
Combining the momentum and kinetic energy conservation formulas yields an equivalent, linear relative velocity equation that bypasses solving quadratic terms:
v1i−v2i=−(v1f−v2f)
This expression demonstrates that the relative speed of approach between two colliding bodies equals the negative of their relative speed of recession.
Worked Example: Elastic Collision of Identical Billiard Balls
Problem Statement: Two billiard balls of identical mass (m1=m2) move toward each other with initial velocities of v1i=+30cm/s and v2i=−20cm/s. Find the post-collision velocities assuming a head-on, perfectly elastic collision.
Step 1: Apply Conservation of Momentum:
Write the conservation equation:
m1v1i+m2v2i=m1v1f+m2v2f
Since m1=m2, the masses cancel out directly:
v1i+v2i=v1f+v2f
Sum equation (1) and equation (2):
(v1f+v2f)+(v2f−v1f)=10cm/s+50cm/s2v2f=60cm/s⟹v2f=+30cm/s
Substitute v2f=+30cm/s back into equation (1):
v1f+30cm/s=10cm/s⟹v1f=−20cm/s
Physical Implication: The billiard balls exchange velocities entirely, behaving as if they passed through one another. This exchange occurs in any head-on elastic collision between two objects of identical mass.
One-Dimensional Inelastic and Perfectly Inelastic Collisions
In general inelastic collisions, linear momentum is conserved, but kinetic energy is not conserved.
In a perfectly inelastic collision, the colliding objects stick together upon contact and move forward with a single common final velocity vf.
Although kinetic energy is not conserved, not all kinetic energy is lost; the system retains the minimum kinetic energy required to satisfy momentum conservation.
The conservation of momentum equation for a perfectly inelastic collision is:
m1v1i+m2v2i=(m1+m2)vf
Solving for the common final velocity yields:
vf=m1+m2m1v1i+m2v2i
Problem-Solving Strategy for One-Dimensional Collisions
Coordinate Reference Frame: Establish a coordinate axis and define all velocities with respect to this axis. Aligning the coordinate axis with one of the initial velocity vectors simplifies signage.
Diagram Construction: Draw "before" and "after" collision sketches. Clearly label every velocity vector, mass, and directional sign, maintaining consistent indices and subscripts.
Conservation of Momentum Formulation: Write general mathematical expressions for total momentum prior to and following impact:
∑pi=∑pf
Equate the expressions and input all known scalar components.
Energy Conservation Formulation: If the collision is perfectly elastic, formulate a second equation using either the kinetic energy conservation equation or the relative velocity expression v1i−v2i=−(v1f−v2f).
Algebraic Solution: Solve the resulting system of algebraic equations simultaneously for the unknown variables.
Glancing Collisions in Two Dimensions
For collisions taking place in a plane or three-dimensional space, linear momentum conservation applies independently along each coordinate axis.
Along the horizontal (x) and vertical (y) axes, momentum conservation is stated as:
m1v1ix+m2v2ix=m1v1fx+m2v2fxm1v1iy+m2v2iy=m1v1fy+m2v2fy
Explicit subscripts must track the particle identity (1,2), time state (i,f), and spatial component (x,y).
When object 1 strikes a stationary target object 2 (v2i=0) and moves off at an angle θ while object 2 moves off at an angle ϕ, the components are resolved via trigonometry:
Along the x-axis:
m1v1i=m1v1fcos(θ)+m2v2fcos(ϕ)
Along the y-axis:
0=m1v1fsin(θ)−m2v2fsin(ϕ)
Worked Example: Two-Dimensional Vehicular Intersection Collision
Problem Statement: A car of mass 1.50×103kg traveling east at 25.0m/s collides at an intersection with a 2.50×103kg van traveling north at 20.0m/s. Assuming the vehicles undergo a perfectly inelastic collision (sticking together) and road friction during impact is negligible, determine the magnitude and directional angle θ of the post-collision wreckage velocity.
Given Values:
Car mass: mcar=1.50×103kg
Initial car velocity: vcar=25.0m/s (directed along the +x-axis, East)
Van mass: mvan=2.50×103kg
Initial van velocity: vvan=20.0m/s (directed along the +y-axis, North)
Divide equation (2) by equation (1):
tan(θ)=3.75×104kg⋅m/s5.00×104kg⋅m/s=1.33θ=arctan(1.33)=53.1∘
Step 4: Solve for Final Speed vf:
Isolate vf in equation (2):
vf=(4.00×103kg)sin(53.1∘)5.00×104kg⋅m/s=(4.00×103kg)(0.7997)5.00×104kg⋅m/s=15.6m/s
The combined wreckage moves off at 15.6m/s directed at an angle of 53.1∘ North of East.
Problem-Solving Strategy for Two-Dimensional Collisions
Coordinate Axes: Establish an orthogonal Cartesian coordinate system (x-axis and y-axis). Aligning one coordinate axis with an initial velocity vector reduces the number of non-zero terms.
Diagram Construction: Sketch the system, labeling mass magnitudes, velocity vector arrows, and directional angles (θ,ϕ) relative to the coordinate axes.
Component Conservation of Momentum: Write distinct momentum conservation expressions for both the x-direction and y-direction:
∑pxi=∑pxf∑pyi=∑pyf
Conservation of Energy (Elastic Collisions Only): If the collision is elastic, write the total kinetic energy equation:
21m1v1i2+21m2v2i2=21m1v1f2+21m2v2f2Note: In two dimensions, this scalar kinetic energy equation cannot be converted into a simplified linear relative velocity equation; it must be solved directly alongside the component momentum equations.
System Solution:
Inelastic collisions require solving two independent component momentum equations simultaneously.
Elastic collisions require solving three independent equations (two component momentum equations and one scalar kinetic energy equation) simultaneously.
The Ballistic Pendulum
A ballistic pendulum is a classical mechanical apparatus used to measure the launch speed of high-velocity projectiles, such as bullets.
The system consists of a large wooden block of mass m2 suspended by light wires. A projectile of mass m1 fired into the block becomes embedded in it, and the combined system swings upward to a maximum vertical height h.
Determining the initial bullet speed v1i requires a two-step calculation using both momentum conservation and energy conservation:
The collision between the projectile and block occurs over a very short time interval, during which external horizontal forces are negligible.
Linear momentum is conserved during impact:
pi=pfm1v1i+m2v2i=(m1+m2)vf
Because the block is initially stationary (v2i=0):
m1v1i=(m1+m2)vf— (1)
Solving for v1i in terms of the post-impact speed vf:
v1i=(m1m1+m2)vf
Phase 2: Pendulum Arc Swing (Mechanical Energy Conservation):
After the projectile embeds, the block and bullet swing upward together. Tension in the suspending wires acts perpendicular to the motion and does no work.
Total mechanical energy is conserved as the block swings from its lowest position to its maximum height h:
(KE+PE)after collision=(KE+PE)top21(m1+m2)vf2+0=0+(m1+m2)gh— (2)
Canceling the mass term (m1+m2) gives:
vf2=2gh⟹vf=2gh
Master Ballistic Pendulum Formula:
Substituting the expression for vf back into equation (1) yields the initial projectile speed:
v1i=(m1m1+m2)2gh
Worked Example: Bullet Speed via Ballistic Pendulum
Problem Statement: In a ballistic pendulum experiment, the bullet has a mass of m1=5.00g, the pendulum block has a mass of m2=1.00kg, and the maximum vertical height reached is h=5.00cm. Find the initial speed of the bullet.
Given Values:
Bullet mass: m1=5.00g=5.00×10−3kg
Block mass: m2=1.00kg
Combined mass: m1+m2=1.005kg
Maximum vertical height: h=5.00cm=5.00×10−2m
Acceleration due to gravity: g=9.80m/s2
Step 1: Calculate Common Post-Collision Speed vf:
Use the energy conservation relation:
vf=2ghvf=2(9.80m/s2)(5.00×10−2m)=0.980m2/s2=0.990m/s
Step 2: Calculate Initial Projectile Speed v1i:
Apply the momentum conservation equation:
(5.00×10−3kg)v1i=(1.005kg)(0.990m/s)v1i=5.00×10−3kg(1.005kg)(0.990m/s)=0.005kg0.99495kg⋅m/s=199m/s