Forces and Motion

Fundamental Facts About Forces

  • Definition and Effects of Forces:
    • A force is a push or pull acting upon an object.
    • Forces can cause three major types of changes:
    1. Change speed:
      • Speeding up an object (e.g., increasing velocity from 2 m/s2\,m/s to 4 m/s4\,m/s).
      • Slowing down an object (e.g., decreasing velocity from 4 m/s4\,m/s to 2 m/s2\,m/s).
      • Moving an object from rest (e.g., changing velocity from 0 m/s0\,m/s to 4 m/s4\,m/s).
      • Stopping a moving object to bring it to rest (e.g., changing velocity from 4 m/s4\,m/s to 0 m/s0\,m/s).
    2. Change direction:
      • Altering the trajectory of a moving body (e.g., guiding an object along a curved or circular path).
    3. Change shape:
      • Deforming a flexible or elastic object (e.g., squeezing a ball or a lemon).

Changes forces can make

  • Critical Concepts Concerning Motion and Force Direction:
    • Force is not always applied in the direction of motion:
    • A descending parachutist moves downward while air resistance exerts an upward force.
    • A rocket launched upward exerts thrust force in the direction of motion.
    • A car applying brakes moves forward while the net force acts backward.
    • Force requirements for movement:
    • Force is required to start an object moving from rest.
    • Force is not required to keep an object moving at a constant speed.
    • In physics, a moving object can have zero net force acting upon it, such as an object moving through frictionless outer space or an object moving at constant velocity on Earth.
    • Direction of net force during deceleration:
    • Any decelerating object experiences a net force in the direction opposite to its motion. For example, when a car applies its brakes, its direction of motion is forward, but the resultant (net) force is backward.

Force direction versus motion direction

  • Velocity, Acceleration, and Balanced Forces:
    • Acceleration in physics refers broadly to any change in velocity, including both speeding up (acceleration) and slowing down (deceleration).
    • Continuous forces vs. Impulse forces:
    • Continuous force is applied persistently over time throughout motion, causing continuous acceleration.
    • Impulse or instantaneous force is applied for a very short duration (a second or less) and does not cause continuous acceleration.
    • Maintaining constant speed in real-world scenarios:
    • Maintaining constant car speed requires continuously pressing the accelerator pedal to generate a forward driving force that exactly balances opposing friction and drag forces, resulting in Fnet=0 NF_{net} = 0\,N.

Continuous force vs Impulse

Driving force balancing friction force

Newton's Laws of Motion

  • Newton's First Law of Motion:

    • Every object tends to remain in its uniform state of rest or constant speed in a straight line unless acted upon by an external net force.
    • If net force Fnet=0 NF_{net} = 0\,N, an object at rest stays at rest (0 m/s→0 m/s0\,m/s \rightarrow 0\,m/s), and an object in motion continues moving at constant velocity (4 m/s→4 m/s4\,m/s \rightarrow 4\,m/s).
  • Newton's Second Law of Motion:

    • Mathematical relationship governing force, mass, and acceleration:     F=m×aF = m \times a
    • Key variables and units:
    • FF = net force, measured in Newtons (NN).
    • mm = mass, measured in kilograms (kgkg).
    • aa = acceleration, measured in meters per second squared (m/s2m/s^2).
    • Vector relationship:
    • The direction of the acceleration vector is identical to the direction of the net force vector.
    • Proportionality rules:
    • Acceleration aa is directly proportional to force FF when mass mm is constant.
    • Acceleration aa is inversely proportional to mass mm when force FF is constant.
    • If force increases, acceleration increases proportionally.
    • If force decreases, acceleration decreases proportionally.
    • If force is constant, acceleration remains constant.
    • If force is directed to the left, acceleration is directed to the left.
    • If force is zero, acceleration is zero.
    • Standard definition of one Newton (1 N1\,N):
    • One Newton is defined as the net force required to accelerate a body of mass 1 kg1\,kg at a rate of 1 m/s21\,m/s^2.
    • Measuring instruments:
    • Force and weight are measured using a spring balance (Newton meter).
    • Mass is measured using a sensitive balance.

Newton's second law triangle

Acceleration vs Mass hyperbola

Acceleration vs Force linear plot

  • Newton's Third Law of Motion:
    • For every action force, there is an equal and opposite reaction force.
    • Properties of reaction force pairs:
    1. Equal in magnitude to the pushing/action force.
    2. Opposite in direction.
    3. Identical in force type.

Specific Types of Forces

  • Gravitational Force and Weight:
    • Gravitational force is the force of attraction exerted by Earth (or any celestial body) on matter.
    • Weight (WW) vs. Mass (mm):
    • Weight is a vector quantity defined as the force of gravity acting on a body, measured in Newtons (NN).
    • Mass is a scalar quantity defined as the total quantity of matter contained within an object, measured in kilograms (kgkg).
    • Mass remains constant everywhere in the universe.
    • Weight varies depending on local gravitational field strength.
    • Formula for weight:     W=m×gW = m \times g
    • Gravitational field strength / acceleration due to gravity (gg):
    • On Earth, g≈9.8 m/s2g \approx 9.8\,m/s^2 or 9.8 N/kg9.8\,N/kg (often rounded to 10 m/s210\,m/s^2 in simplified problems).
    • gg is defined as the force of gravity per unit mass:       g=Wmg = \frac{W}{m}
    • Gravitational strength varies across astronomical bodies (e.g., Earth's gravity gg is approximately 66 times greater than the Moon's gravity).

Weight formula diagram

  • Friction Force Between Solid Objects:

    • Friction is a contact force between solid surfaces that always opposes motion.
    • Energy conversion:
    • Friction causes kinetic energy to be converted into heat energy.
    • Practical techniques to reduce friction:
    1. Oiling and greasing mechanical gears.
    2. Applying liquid lubricants.
    3. Creating an air cushion to separate contact surfaces.
    4. Streamlining object shapes (e.g., aerodynamic car designs).
    5. Replacing sliding motion with rolling motion.
    6. Polishing contact surfaces to reduce roughness.
  • Drag Force and Air Resistance:

    • Drag force is fluid friction occurring between a solid object and a surrounding liquid or gas. Air resistance is a common example of drag force.
    • Key characteristics:
    1. Always acts in opposition to motion.
    2. Increases magnitude as object speed increases.
    3. Dissipates kinetic energy as heat energy.
    • Factors influencing drag forces:
    1. Object shape: Streamlined shapes minimize drag forces.
    2. Object size: Larger cross-sectional area increases drag forces.
    3. Object speed: Higher velocities increase drag forces.
    4. Fluid density: Fluids with lower density create less drag.
  • Analysis of Falling Objects:

    • Free Fall:
    • Occurs when an object falls strictly under the influence of gravity with zero air resistance or resistive drag forces (a=g=9.8 m/s2a = g = 9.8\,m/s^2).
    • Falling Against Air Resistance:
    • Accounts for air resistance opposing the downward force of gravity (weight).
    • Step-by-step breakdown of a falling object / parachute drop:
    1. Initial release (State 1):
      • Speed is zero (v=0 m/sv = 0\,m/s), drag is zero (Drag=0 N\text{Drag} = 0\,N).
      • Net force equals total weight (Fnet=W=12 NF_{net} = W = 12\,N downward).
      • Initial acceleration equals acceleration due to gravity (9.8 m/s29.8\,m/s^2).
    2. Speed increase phase (State 2):
      • Velocity increases, causing upward air resistance (drag) to build up (e.g., drag increases to 3 N3\,N, then 7 N7\,N).
      • Net downward force decreases (Fnet=12 N−3 N=9 NF_{net} = 12\,N - 3\,N = 9\,N, then 12 N−7 N=5 N12\,N - 7\,N = 5\,N).
      • Acceleration continuously decreases.
    3. Terminal velocity phase (State 3):
      • Upward drag equals downward weight (e.g., Drag=12 N\text{Drag} = 12\,N for a 12 N12\,N weight).
      • Net force becomes zero (Fnet=12 N−12 N=0 NF_{net} = 12\,N - 12\,N = 0\,N).
      • Acceleration drops to zero (a=0 m/s2a = 0\,m/s^2).
      • Object falls at constant maximum velocity, termed terminal velocity.
    4. Parachute deployment (State 4):
      • Opening the parachute suddenly increases surface area, producing a huge upward drag force greater than weight.
      • Net force acts upward, causing rapid deceleration.
    5. Lower terminal velocity phase (State 5):
      • As speed decreases, drag drops until upward drag balances downward weight once again.
      • A new, lower terminal velocity is established, ensuring a safe landing speed.
    6. Ground impact (State 6):
      • Object impacts the ground and comes completely to rest (v=0 m/sv = 0\,m/s).

Velocity-time graph for falling object against air resistance

Parachute jump phases diagram

  • Centripetal Force:

    • Centripetal force is a net force acting continuously toward the center of a circular path, compelling an object to move in a circle.
    • Directional behavior:
    • Perpendicular to the direction of motion (velocity vector) at all times.
    • Circular motion acceleration principles:
    • An object moving in a circle at constant speed is accelerating because its direction of motion continuously changes, which alters its velocity vector.
    • Both centripetal force and centripetal acceleration are directed toward the center of the circle, while instant motion is tangential.
    • Factors increasing required centripetal force:
    1. Increasing object mass.
    2. Increasing motion speed.
    3. Decreasing circle radius.
  • Upthrust Force:

    • Upthrust is an upward buoyancy force exerted by fluids (liquids and gases) on submerged or floating objects.
    • Upthrust vs. Drag Force in fluids:
    • Drag force always opposes the direction of object motion (can act in any direction).
    • Upthrust force always acts strictly upward, regardless of motion direction.
  • Elastic Force and Hooke's Law:

    • Elastic materials return to their original shape and size once stretching forces are removed.
    • Extension definition:     Extension x=Stretched Length−Original Length\text{Extension } x = \text{Stretched Length} - \text{Original Length}
    • Hooke's Law statement:
    • The extension of a metal spring is directly proportional to the stretching force applied, provided the limit of proportionality is not exceeded.
    • Formula:     F=k×xF = k \times x
    • FF = stretching force in Newtons (NN).
    • kk = spring constant / stiffness in Newtons per meter (N/mN/m).
    • xx = extension in meters (mm).
    • Limit of Proportionality:
    • Before limit of proportionality: Force is directly proportional to extension (F∝xF \propto x). The graph is a straight line through the origin, Hooke's law is obeyed, and the spring recovers its original length when unloaded.
    • Beyond limit of proportionality: Force is no longer directly proportional to extension. The graph curves upward, Hooke's law is violated, and permanent deformation occurs.

Hooke's Law formula

Extension vs Force graph with Limit of Proportionality

  • Comparing Spring Stiffness:

    • On an Extension vs. Force graph, a line closer to the Force axis represents a stiffer (harder to extend) spring.
    • On a Force vs. Extension graph, a line with a steeper slope represents a stiffer spring.
  • Springs Connected in Series and Parallel:

    • Series connection: Two identical springs connected end-to-end under the same load yield double the extension (2x2x) compared to a single spring.
    • Parallel connection: Two identical springs connected side-by-side sharing the same load yield half the extension (12x\frac{1}{2}x) compared to a single spring.

Series vs Parallel spring extensions

Methods for Adding Forces

  • Adding Inline Forces:

    • Forces acting along the same line in the same direction:
    • Add force magnitudes together.
    • Resultant force acts in the common direction.
    • Example: Two forces of 100 N100\,N and 60 N60\,N acting to the right give a resultant force of:       100 N+60 N=160 N to the right100\,N + 60\,N = 160\,N \text{ to the right}
    • Forces acting along the same line in opposite directions:
    • Subtract smaller force magnitude from larger force magnitude.
    • Resultant force acts in the direction of the larger force.
    • Example: Forces of 100 N100\,N to the right and 60 N60\,N to the left give a resultant force of:       100 N−60 N=40 N to the right100\,N - 60\,N = 40\,N \text{ to the right}
  • Adding Perpendicular Forces (Forces at Right Angles):

    • Scenario: Two forces act on an object at an angle of 90∘90^\circ (e.g., a horizontal force of 1200 N1200\,N to the left and a vertical force of 900 N900\,N upward).

Two forces acting at right angles scenario

  • Method 1: Scale Drawing / Triangle Method (Graphical):

    1. Select an appropriate scale (e.g., 100 N:1 cm100\,N : 1\,cm).
    • 1200 N1200\,N force becomes a 12 cm12\,cm arrow.
    • 900 N900\,N force becomes a 9 cm9\,cm arrow.
    1. Draw the first force arrow horizontally (12 cm12\,cm to the left).
    2. Use a protractor to measure a 90∘90^\circ angle from the tip of the first arrow.
    3. Draw the second force arrow head-to-tail (9 cm9\,cm vertically upward).
    4. Draw the hypotenuse from the tail of the first arrow to the tip of the second arrow to represent the resultant force vector.
    5. Measure hypotenuse length with a ruler (15 cm15\,cm length →\rightarrow 1500 N1500\,N resultant force magnitude).
    6. Measure the angle θ\theta between the resultant hypotenuse and the horizontal force vector using a protractor (37∘37^\circ).
  • Method 2: Mathematical Method (Pythagoras Theorem and Trigonometry):

    • Calculating resultant force magnitude using Pythagoras Theorem:     c2=a2+b2c^2 = a^2 + b^2c=a2+b2c = \sqrt{a^2 + b^2}c=9002+12002c = \sqrt{900^2 + 1200^2}c=810000+1440000=2250000=1500 Nc = \sqrt{810000 + 1440000} = \sqrt{2250000} = 1500\,N
    • Calculating resultant direction angle θ\theta using trigonometry:     tan⁡(θ)=oppositeadjacent\tan(\theta) = \frac{\text{opposite}}{\text{adjacent}}θ=tan⁡−1(oppositeadjacent)\theta = \tan^{-1}\left(\frac{\text{opposite}}{\text{adjacent}}\right)θ=tan⁡−1(9001200)=tan⁡−1(0.75)=37∘\theta = \tan^{-1}\left(\frac{900}{1200}\right) = \tan^{-1}(0.75) = 37^\circ

Trigonometric vector resolution diagram