Comprehensive Industrial Fermentation Systems and Fermenter Design Notes

Introduction and Administrative Details

  • Class Context: The session follows a previous discussion where the group was traveling via bus to Maria, while the lecturer was at a tea house. The focus of the current lesson is fermenters, specifically the types of fermenters and how they function.

  • Administrative Announcements:     * Test Date: The assessment is scheduled for April 28.     * Attendance Issues: The lecturer noted that only 40 to 45 people were in attendance. There is a observed bad practice where students log into the session and then leave, evidenced by people remaining in the virtual class 10 minutes after the lecture finishes. This practice is discouraged as it denies students the opportunity to learn specific points discussed regarding the slides.

  • Post-PhD Aspirations: A brief dialogue occurred regarding the addictive nature of academic achievement post-PhD. Despite the suffering involved in studying, the pursuit of excellence often leads researchers back to further study.

Defining Industrial Fermentation

  • Metabolic Fermentation: A biological process where sugar is broken down in the absence of oxygen to create byproducts such as ethanol, glycerol, and acids.

  • Industrial Fermentation: In the industrial sector, fermentation refers to the mass production of products using biomass. It is not limited to breaking down sugar for ethanol but includes the production of solids and other complex substances.

  • Mass Production Concepts: High-capacity design is required to handle the increase of heat production and the breakdown of substrates by organisms to produce primary and secondary metabolites.

Evolution and Materials of Fermenter Design

  • Traditional Vessels: Fermentation is an old technology from the time of our "forefathers." Early vessels were carved from wood or stone.     * Wood in Modern Industry: While less common, wood is still used in winemaking and spirit production for casks. This provides the product with a specific "woody finish" during aging.

  • Modern Materials:     * Glass and Plastic: Used for smaller scales or specific applications.     * Plastic-lined Fermenters: Predominantly used in biopharmaceuticals. These are single-use/disposable to avoid the need for repeated sterilization and to prevent contamination of expensive batches like insulin, hormones, or medicines.     * Stainless Steel: The most popular material due to its durability. It can be cleaned and polished to a beautiful finish, making it clear when the vessel is sterile. It withstands scrubbing, repeated sterilization, and corrosion from acidic, salty, or alkaline broths.

  • Sterilization: In large-scale fermentation (e.g., ethanol or acid production), the products themselves often provide sterilization due to their antimicrobial properties. However, initial sterilization ("trimming") is necessary to ensure no contaminants are present at the start of the process.

Key Components and Structural Features

  • Materials and Resilience: Materials must withstand cleaning, scrubbing, and chemical corrosion (pH fluctuations).

  • Pressure Management: Fermenters must have pressure gauges to monitor internal pressure and prevent explosions.

  • Condensers: Modern fermenters use condensers to contain water vapor. If steam escapes, it changes the nutrient concentration in the broth; condensers cool the steam back into water and return it to the tank to maintain the proper nutritional balance for the organisms.

  • Exhaust Filters: Sterile thermal exhaust filters are used to contain aerosols. This prevents pathogens (referenced with COVID as an example of airborne travel) from escaping the fermenter and being inhaled by laboratory workers or entering the environment.

Fermenter Scales and Control

  • Scale of Operation:     * Laboratory Scale: Usually limited to up to 10 dm310\,dm^3.     * Biopharmaceuticals/Enzymes: These specialty products often use vessels up to 20,000 dm320,000\,dm^3.     * Wine and Beer: Due to high demand (noting South Africa is among the top 3 alcohol consumers in Africa and top 20 globally), these fermenters reach capacities of 500,000 dm3500,000\,dm^3.

  • The Power of Control: The fermenter allows producers to control parameters such as substrate, duration, and quality standards. This ensures high biomass density and consistent product quality.

  • Key Parameters for Control:     * Agitation     * Sterility     * Aeration (Oxygen transfer)     * pH levels     * Temperature     * Foam production

The Three Phases of Fermentation Broth

Fermentation involves a heterogeneous mixture consisting of three distinct phases:

  1. Liquid Phase: The broth containing water, organic/inorganic nutrients (carbon and nitrogen sources), minerals, and secreted metabolites (primary and secondary).

  2. Gaseous Phase: Primarily oxygen (O2O_2) for aerobic processes and carbon dioxide (CO2CO_2) produced during respiration. In anaerobic conditions, oxygen is absent and CO2CO_2 levels are high.

  3. Solid Phase: Includes the microbial cells and any unconsumed substrates, such as cellulose or corn steep liquor.

Agitation and Mixing Mechanisms

  • Purpose of Agitation: To create a homogeneous mixture, ensuring nutrients, gases, and heat are distributed evenly. It prevents "dead zones" where cells might settle and die due to lack of nutrients.

  • Components of Mixing:     * Shaft: The central rod entering the vessel through a sealable valve.     * Impellers: Blades attached to the shaft. They act like a "slicer," chopping gas bubbles into micro-bubbles to increase the surface area for oxygen transfer.     * Rushton Impellers: High-speed impellers used for bacterial cultures needing high oxygenation.     * Marine Impellers: Gentler impellers used for mammalian cells, which lack cell walls and are susceptible to shear stress.     * Baffles: Vertical flat plates attached to the vessel walls (typically 1/101/10th of the vessel width). They break the vortex (whirlpool) created by the impellers, forcing the circular flow into a vertical turbulent motion to ensure total mixing.

Pneumatic (Air-lift) Systems

  • Mechanism: These systems lack mechanical hardware (shafts/impellers). They use gas bubbles to circulate nutrients. Bubbles lift nutrients up, and they drop back down due to their weight.

  • Advantages: Lower energy requirements, no hardware to harbor contamination, and "low shear." This is ideal for fragile mammalian cells or filamentous fungi.

Aeration and Oxygen Transfer Dynamics

  • Solubility Challenges: Oxygen dissolves poorly in water. At 37 ∘C37\,^\circ\text{C}, the maximum dissolved oxygen is approximately 9 mg/dm39\,mg/dm^3. Salts and sugars in the media further decrease this solubility by lowering water activity.

  • Sparging: The intentional flushing of air into the broth through an inlet (sparger) at the bottom. The flow rate can be controlled, sometimes reaching 1.0 vvm1.0\,\text{vvm} (vessel volume per minute).

  • Factors Influencing Oxygen Transfer:     * Temperature: Increasing temperature lowers solubility.     * Pressure: Increasing pressure increases solubility.     * Bubble Size: Smaller (micro) bubbles increase surface area and solubility.     * Agitation Speed: Faster agitation chops bubbles smaller and improves distribution.

  • Oxygen Mass Balance:     * OTR (Oxygen Transfer Rate): The rate at which oxygen is supplied.     * COD (Critical Oxygen Demand): The rate at which organisms consume oxygen.     * Requirement: OTR must always be greater than COD. If COD>OTRCOD > OTR, the system turns anaerobic, which can be fatal for aerobic organisms.     * Corrective Actions: To increase OTR, one can increase pressure, pump pure oxygen (which dissolves 5×5\times better than air), or increase agitation.

pH Monitoring and Regulation

  • Causes of pH Flux:     * Bacteria using nitrogen sources like ammonia (NH4+NH_4^+) release protons (H+H^+), acidifying the broth.     * Uptake of organic acids can cause the pH to rise.     * CO2CO_2 production reacts with water to form carbonic acid.

  • Control Methods:     * Laboratory: Buffers are used, but they are overwhelmed in large-scale systems by high cell density.     * Industrial: Automated systems use submerged, sterilized electrodes to monitor pH in real-time. Data is sent to a controller (computer).     * Adjustment: If the broth is too acidic, alkaline solutions like ammonium hydroxide (NH4OHNH_4OH) are pumped in. NH4OHNH_4OH is preferred because it serves as both a pH regulator and a nitrogen source for synthesizing amino acids, nucleic acids, and vitamins.

Temperature and Foam Control

  • Temperature: Fermentation is an exothermic process (metabolism generates heat). High temperatures reduce oxygen solubility and can denature enzymes or kill non-thermophilic organisms. Control is maintained via high-precision resistance thermometers (probes) and cooling systems.

  • Foam Control: Foam is often caused by high protein content in the broth. It must be managed to prevent it from exiting the vessel or interfering with sensors.     * Antifoam Agents: Chemical surfactants added to the media to break down foam.     * Mechanical Foam Breakers: Spinning devices at the top of the shaft that physically crush the foam back into the liquid phase.

Questions & Discussion

  • Question from student: How do salts and sugars affect the dissolved oxygen (DO)? Is it a direct chemical effect or a reaction from the microbes?

  • Response: Both. Chemicals like salts and sugars lower the water activity (awa_w), reducing the space for bubbles and the efficiency of the transfer interface. Additionally, metabolic reactions consumption of these substrates directly consumes oxygen. Salts do not necessarily react to form new compounds like NaOHNaOH, but they physically alter the solubility environment of the broth.