Membrane Potential, Neurotransmission, and Graded Potential Summation

Principles of Membrane Permeability and Transport Mechanisms

  • Factors Governing Membrane Permeability:

    • Size: Small molecules cross membranes much more readily than large molecules.
    • Polarity and Charge:
    • Non-polar molecules do not interact favorably with polar water molecules and dissolve readily through the hydrophobic interior of the lipid bilayer.
    • Polar molecules interact favorably with water and ions but face an energetic barrier when attempting to cross the hydrophobic core of the plasma membrane.
    • Charged particles (ions) possess full electrical charges and hydration shells, making them virtually impermeable to the hydrophobic lipid bilayer without protein assistance.
  • Classes of Transmembrane Transport:

    • Simple Diffusion: Passive transport where substances move down their chemical concentration gradient directly through the lipid bilayer without the assistance of membrane proteins.
    • Facilitated Diffusion: Passive transport where molecules move down their concentration or electrochemical gradient with the mediation of a transmembrane protein (channel or permease/carrier).
    • No cellular metabolic energy (ATP\text{ATP}) is expended.
    • Solute movement proceeds down the concentration gradient until equilibrium is reached, at which point inward and outward fluxes are equal ([Glucose]out=[Glucose]in[\text{Glucose}]_{\text{out}} = [\text{Glucose}]_{\text{in}}).
    • Active Transport: Protein-mediated transport that moves solutes against an electrical or chemical gradient.
    • Requires direct or indirect metabolic energy input, typically via adenosine triphosphate (ATP\text{ATP}) hydrolysis.

Classification of membrane transport into diffusion, facilitated diffusion, and active transport

  • Transporters and Functional Classes of Ion Channels:
    • Transport proteins regulate the selective permeability of the plasma membrane, providing hydrophilic pathways for polar and charged particles.
    • Leak Channels: Channels that are constitutively open, permitting continuous, unregulated passive diffusion of ions down their electrochemical gradient (e.g., K+K^+ leak channels, Na+Na^+ leak channels).
    • Ligand-Gated Channels (Chemically Gated): Channels that open or close in response to the binding of a specific chemical ligand (such as the neurotransmitter acetylcholine).
    • Channels remain in an open conformation for the duration of ligand binding and revert to a closed conformation when the ligand dissociates.
    • Mechanically-Gated Channels: Channels that transition between open and closed conformations in response to physical membrane deformation, mechanical stress, tension, stretch, or pressure.
    • Voltage-Gated Channels: Channels whose opening and closing gates are regulated by shifts in the transmembrane potential difference (VmV_m), such as voltage-gated K+K^+ channels opening at −50 mV-50\,\text{mV}.

Overview of leak channels, ligand-gated channels, mechanically-gated channels, and voltage-gated channels

Membrane Potential (VmV_m) and the Electrochemical Gradient

  • Definitions of Potential:

    • Membrane Potential (VmV_m): The electrical gradient (voltage difference) across a cellular plasma membrane resulting from the separation of opposing electrical charges.
    • Resting Membrane Potential: The stable membrane potential of an excitable cell (such as a neuron or muscle cell) when action potentials or graded potentials are not being generated.
  • Tissues Specialized for Electrical Signaling:

    • Neurons.
    • Muscle cells, including skeletal muscle, cardiac muscle, and smooth muscle.
  • Electrochemical Driving Forces Governing Ion Movement:

    • For non-charged molecules, movement across the membrane is dictated exclusively by the chemical (concentration) gradient.
    • For charged particles (ions), movement is dictated by the electrochemical gradient, representing the vector sum of:
    • Chemical Gradient: The concentration differential between the intracellular and extracellular compartments.
    • Electrical Gradient: The attractive or repulsive electrical force exerted by the net charge across the membrane.
    • Potassium Dynamic Equilibrium Example:
    • When the membrane is impermeable to all ions, no net charge separation occurs.
    • Upon opening of selective K+K^+ channels, K+K^+ diffuses down its chemical concentration gradient out of the cell into the extracellular fluid.
    • As positive charges exit, impermeable intracellular anions remain behind, creating an inward-directed electrical gradient that pulls positive K+K^+ ions back into the cell.
    • Potassium ions continue to exit until the outward chemical gradient equals the inward electrical gradient in magnitude, establishing equilibrium.

Establishment of an equilibrium potential across a membrane via selective potassium permeability

  • Electrophysiological Measurement and Conventions:
    • Membrane potential is measured using a voltmeter connected to two electrodes:
    • A recording microelectrode inserted directly into the cytosol.
    • A reference electrode positioned in the extracellular fluid (ECF).
    • By international physiological convention, the extracellular fluid is defined as electrical ground (0 mV0\,\text{mV}).
    • Membrane potential is expressed as the internal charge relative to the external charge:     Vm=Vinside−VoutsideV_m = V_{\text{inside}} - V_{\text{outside}}
    • A resting membrane potential of −70 mV-70\,\text{mV} indicates that the interior surface of the cell membrane is 70 mV70\,\text{mV} more negative than the adjacent exterior fluid.

Voltmeter apparatus recording resting membrane potential with microelectrode and reference electrode

  • The Membrane Micro-environment and Bulk Neutrality:
    • The membrane potential exists solely across a microscopic boundary layer immediately adjacent to the inner and outer leaflets of the plasma membrane.
    • Separated charges line up along the membrane due to mutual electrostatic attraction across the thin lipid bilayer.
    • The bulk fluid of the intracellular compartment (cytosol) and the bulk extracellular fluid remain electrically neutral.
    • Quantity of Ions Required to Shift Potential:
    • Only 11 in every 100,000100{,}000 K+K^+ ions must move across the membrane to shift the membrane potential from +30 mV+30\,\text{mV} to −70 mV-70\,\text{mV}.
    • Metaphor: This minute ion flux is "a tear in the ocean," producing virtually no detectable alteration in the overall bulk concentrations of Na+Na^+ and K+K^+ across the cell.

Separation of charges across the plasma membrane micro-environment while bulk solutions remain neutral

  • The Principle of Relative Permeability:
    • The creation and magnitude of the membrane potential depends upon:
    • The unequal distribution of ions across the plasma membrane.
    • The valence/charge of each ion.
    • The relative permeability of the membrane to each ion.
    • The ion with the highest membrane permeability exerts the greatest pull on the membrane potential, driving VmV_m closest to its own equilibrium potential and defining the overall polarity.

Maintenance of Resting Membrane Potential and the Na+/K+-ATPaseNa^+/K^+\text{-ATPase} Pump

  • Typical Asymmetric Ion Distributions in Animal Cells:

    • Potassium (K+K^+): High inside the cell (cytosol); low outside in the extracellular fluid.
    • Sodium (Na+Na^+): Low inside the cell; high outside in the extracellular fluid.
    • Chloride (Cl−Cl^-): Low inside the cell; high outside in the extracellular fluid.
    • Nondiffusible Anions: Negatively charged proteins and organic phosphate ions (PO43−\text{PO}_4^{3-}) are trapped inside the cytosol, contributing to intracellular electronegativity.
  • Passive Leak and the Necessity of the Pump:

    • Neuronal resting membranes possess abundant open K+K^+ leak channels and far fewer open Na+Na^+ leak channels.
    • Because K+K^+ is constantly leaking down its concentration gradient outward and Na+Na^+ is leaking down its electrochemical gradient inward, the concentration gradients would eventually dissipate completely in the absence of active transport.
    • Continuous active transport by the sodium-potassium pump (Na+/K+-ATPaseNa^+/K^+\text{-ATPase}) is required to sustain steady-state resting membrane potential.
  • Mechanism and Stoichiometry of Na+/K+-ATPaseNa^+/K^+\text{-ATPase}:

    • An integral transmembrane protein that utilizes energy derived from primary active transport.
    • Hydrolyzes one molecule of ATP to ADP and inorganic phosphate (ATP→ADP+Pi\text{ATP} \rightarrow \text{ADP} + \text{P}_i).
    • Transports 3 Na+3\,Na^+ ions out of the cytoplasm into the extracellular fluid.
    • Transports 2 K+2\,K^+ ions into the cytoplasm from the extracellular fluid.
    • Electrogenic contribution: Because 33 positive charges exit for every 22 positive charges imported, the pump generates a small direct negative current (approximately −2 mV-2\,\text{mV} to −5 mV-5\,\text{mV}), while its primary role remains the maintenance of the steep chemical gradients.

Active transport mechanism of the Na+/K+ ATPase maintaining resting ion distributions alongside leak channels

  • Pharmacological Inhibition via Ouabain:
    • Ouabain: A specific cardiac glycoside poison that selectively binds to and inhibits the extracellular domain of the Na+/K+-ATPaseNa^+/K^+\text{-ATPase}.
    • Temporal Voltage Kinetics Following Ouabain Administration:
    • Point 1 (Cell Impalement): The recording microelectrode enters the cell, dropping the measured voltage from 0 mV0\,\text{mV} down to the resting potential of −70 mV-70\,\text{mV}.
    • Point 2 (Initial Ouabain Addition): Application of ouabain immediately abolishes the electrogenic contribution of the pump, causing an immediate, minor depolarization of several millivolts.
    • Point 3 (Progressive Dissipation): Over minutes, unabated passive leakage through K+K^+ and Na+Na^+ leak channels steadily degrades the transmembrane concentration gradients, producing a continuous, linear depolarization.
    • Point 4 (Complete Gradient Collapse): Upon prolonged ouabain exposure, all electrochemical gradients run down, and the membrane potential approaches 0 mV0\,\text{mV}.

Membrane potential response curve following cell impalement and exposure to ouabain

Functional Organization and Structural Classes of Neurons

  • Three Core Cellular Functions of Neurons:

    • Receive and integrate incoming signals.
    • Conduct electrical signals through the cell body and along the axon.
    • Transmit signals across junctions to downstream effector cells (other neurons, muscle fibers, or glands).
  • The Four Functional Zones of a Neuron:

    • 1. Input Zone (Signal Reception):
    • Anatomical structures: Dendrites and soma (cell body).
    • Function: Receives chemical inputs from upstream presynaptic terminals via receptor binding; generates local graded potentials.
    • 2. Summation Zone (Signal Integration):
    • Anatomical structure: Axon hillock (trigger zone).
    • Function: Integrates and algebraically sums incoming electrotonic currents; initiates an action potential if the net membrane potential meets or exceeds threshold.
    • 3. Conduction Zone (Signal Conduction):
    • Anatomical structure: Axon (often enveloped by an insulating myelin sheath).
    • Function: Rapidly conducts all-or-none action potentials over long cellular distances without signal decrement.
    • 4. Output Zone (Signal Transmission):
    • Anatomical structures: Axon terminals (pre-synaptic boutons / synaptic knobs).
    • Function: Translates arriving electrical action potentials into chemical neurotransmitter release into the synaptic cleft.

The four functional zones of a neuron: input, summation, conduction, and output zones

  • Structural Classification of Neurons:
    • Multipolar Neurons: Possess one axon and multiple dendrites extending directly from the soma.
    • Examples: Motor neurons innervating skeletal muscle fibers; Purkinje cells of the cerebellum displaying massive dendritic branching trees.
    • Bipolar Neurons: Possess two distinct processes extending from opposite poles of the soma—a single dendritic process and a single axon (e.g., specialized sensory neurons in the retina and olfactory epithelium).
    • Unipolar (Pseudounipolar) Neurons: Possess a single short process extending from the cell body that bifurcates into a peripheral process (extending to sensory receptors) and a central process (entering the central nervous system).
    • Cell body is positioned off to the side, bypassing the input summation zone directly into the conduction pathway (e.g., primary sensory afferents).

Morphological comparison of multipolar, bipolar, and unipolar neurons

Distribution of Membrane Channels and Transporters Across Neurons

  • Compartmentalized Ion Channel Expression:
    • The specialized physiological function of each of the four neuronal zones is dictated by the specific distribution of membrane transport proteins embedded within that region's lipid bilayer.
    • Dendrites and Cell Body (Soma):
    • Predominantly express ligand-gated ion channels (chemical receptors) to receive neurotransmitter signals and translate them into graded potentials.
    • Axon Hillock and Axon:
    • Highly enriched in voltage-gated Na+Na^+ channels and voltage-gated K+K^+ channels.
    • The axon hillock has the highest local density of voltage-gated Na+Na^+ channels, establishing the electrical threshold required to trigger an action potential.
    • Axon Terminal (Presynaptic Bouton):
    • Densely populated with voltage-gated Ca2+Ca^{2+} channels.
    • Depolarization arriving at the terminal triggers calcium influx, driving synaptic vesicle exocytosis.
    • Entire Neuronal Surface:
    • Uniformly expresses leak channels (K+K^+ and Na+Na^+ leak pathways) and Na+/K+-ATPaseNa^+/K^+\text{-ATPase} pumps to establish and continuously maintain resting membrane potential across all membrane domains.

Spatial distribution of ligand-gated, voltage-gated, leak channels, and Na+/K+ pumps along a neuron

Graded Potentials: Mechanisms, Properties, and Gating

  • Mechanisms and Polarity of Graded Potentials:
    • A graded potential is a local, transient fluctuation in membrane potential that deviates from the resting value.
    • Initiated when incoming environmental or chemical stimuli bind to and open gated ion channels in the dendrites or soma.
    • Depolarization:
    • The membrane potential becomes less negative (or more positive), moving closer to 0 mV0\,\text{mV} (e.g., shifting from −70 mV-70\,\text{mV} toward −50 mV-50\,\text{mV} or above).
    • Occurs when ligand-gated cation channels open, permitting an inward influx of positively charged ions (Na+Na^+) into the cytosol.
    • Hyperpolarization:
    • The membrane potential becomes more negative (or less positive), moving further below the resting potential (e.g., shifting from −70 mV-70\,\text{mV} toward −80 mV-80\,\text{mV} or −100 mV-100\,\text{mV}).
    • Occurs when channels open that facilitate the loss of intracellular positive charge (efflux of K+K^+ through potassium channels) or the gain of intracellular negative charge (influx of Cl−Cl^- through ligand-gated anion channels).

Mechanisms of depolarization via cation influx versus hyperpolarization via anion influx

  • Factors Setting the Magnitude and Duration of a Graded Potential:
    • Number of Ion Channels Opened: Proportional to the concentration of incoming ligand/stimulus.
    • Absence of neurotransmitter: All ligand-gated channels remain closed; membrane remains at resting membrane potential (−70 mV-70\,\text{mV}).
    • Low neurotransmitter concentration: Binds a small subset of receptors, opening few channels; causes a modest ion flux and a small deviation in membrane potential.
    • High neurotransmitter concentration: Binds most available receptors, opening numerous channels simultaneously; generates widespread membrane permeability changes and a large deviation in membrane potential.
    • Length of Stimulation: Ligand-gated channels remain open as long as the ligand is bound to the receptor, maintaining ion flux. Channel closure occurs when neurotransmitter unbinds, is enzymatically broken down, or is removed by reuptake.
    • Types of Channels Opened: Dictates whether the current is depolarizing (excitatory) or hyperpolarizing (inhibitory).

Graded potential amplitude as a function of ligand concentration and channel open state

  • Comparison: Graded Potentials vs. Action Potentials:
    • Graded Potentials:
    • Amplitude: Variable and graded; proportional to the magnitude of the stimulus.
    • Propagation: Decremental spread via passive electrotonic current; decays rapidly over distance.
    • Threshold: No operational threshold required for initiation.
    • Location: Localized to the input zone (dendrites and soma).
    • Channel types: Mediated by ligand-gated, mechanically-gated, or sensory channels.
    • Action Potentials:
    • Amplitude: All-or-none; once triggered, amplitude is always uniform and maximal.
    • Propagation: Non-decremental; continuously regenerated along the axon across long distances.
    • Threshold: Strictly requires membrane potential to reach threshold (typically −55 mV-55\,\text{mV}) at the axon hillock.
    • Location: Occurs in the conduction zone (axon hillock and axon).
    • Channel types: Mediated by voltage-gated Na+Na^+ and K+K^+ channels.

Electrotonic Current Spread and Signal Attenuation

  • Mechanism of Electrotonic Current Spread:
    • Electrotonic Current Spread: The passive spread and movement of electrical charge through the cytoplasm along the inner surface of the cell membrane.
    • Biophysical Process:
    • Opening of ligand-gated channels allows localized influx of Na+Na^+ ions into the cytoplasm.
    • The sudden localized accumulation of positive charge creates a high charge density.
    • These excess positive charges electrostatically repel adjacent positively charged ions and attract negatively charged particles in the intracellular fluid.
    • This repulsion forces a wave of positive current to spread omnidirectionally (in all directions) away from the open channel site along the dendrite and soma.

Spread of electrotonic current away from an active cation channel in all directions

  • Conduction with Reduction (Signal Decay):
    • Graded potentials travel only short distances because electrotonic current decreases in strength with increasing distance from the site of origin.
    • As the wave of positive charge travels through the cytoplasm, the potential difference (ΔVm\Delta V_m) across the membrane steadily decays toward baseline resting levels.

Decay of graded potential voltage amplitude as distance increases from the opened channel

  • Causes of Signal Decay:

    • 1. Electrical Resistance of the Cytoplasm: Cytosol contains complex proteins, organelles, and cytoskeletal filaments that physically impede the movement of free ions, dissipating electrical energy.
    • 2. Leakage of Charged Ions Across the Membrane: The plasma membrane is imperfectly insulated. As the positive electrotonic wave travels along the membrane, positive ions leak out through constitutively open leak channels.
    • 3. Intrinsic Membrane Electrical Properties: Membrane thickness and electrical capacitance alter the efficiency of charge storage and lateral charge propagation.
  • The Leaky Hose Analogy:

    • The attenuation of electrotonic current is analogous to water flowing through a punctured garden hose (soaker hose).
    • Water pressure is highest immediately at the spigot source.
    • As water travels down the length of the hose, continuous leakage through individual perforations reduces volume and internal pressure, resulting in minimal water flow at the distal end.
    • Similarly, current flowing along an unmyelinated dendritic arbor leaks through open membrane channels, causing rapid dissipation of voltage over distance.

Leaky garden hose analogy demonstrating passive loss of pressure and current dissipation over distance

Summation Dynamics at the Axon Hillock and Action Potential Initiation

  • The Role of the Axon Hillock:

    • Because electrotonic currents decay across the soma, the axon hillock functions as an anatomical and electrical integrator.
    • The hillock continuously sums all arriving electrotonic signals originating from multiple dendritic synapses.
    • Contains a dense concentration of voltage-gated sodium channels, establishing a specific electrical threshold potential (typically −55 mV-55\,\text{mV} in neurons, relative to a −70 mV-70\,\text{mV} resting potential).
    • Subthreshold Graded Potentials: If the summated electrical signal reaching the axon hillock fails to reach threshold (e.g., depolarizing only to −58 mV-58\,\text{mV}), voltage-gated channels do not open and no action potential is triggered.
    • Suprathreshold Graded Potentials: If the summated signal depolarizes the axon hillock membrane to or above threshold (−55 mV-55\,\text{mV}), voltage-gated channels open rapidly, triggering an all-or-none action potential down the axon.
  • Temporal Summation:

    • Occurs when a single presynaptic synapse is activated repeatedly in rapid succession.
    • Individual excitatory postsynaptic potentials (EPSPs) are subthreshold and decay over time.
    • If a second and third stimulus arrive before the initial EPSPs have fully dissipated, the successive depolarizations add together over time at the same location, boosting the net potential across the threshold.

Temporal summation showing successive EPSPs from a single synapse building to threshold

  • Spatial Summation:
    • Occurs when multiple distinct presynaptic synapses across different dendritic branches are stimulated simultaneously.
    • The individual EPSPs generated at each separate location travel electrotonically toward the cell body and converge at the axon hillock at the same instant.
    • Their individual depolarizing magnitudes summate in space, combining to bring the membrane potential to threshold.

Spatial summation showing simultaneous EPSPs from multiple synapses converging to trigger an action potential

  • Algebraic Summation of Excitatory and Inhibitory Potentials:
    • Neuronal integration is an algebraic summation process combining both depolarizing (EPSPs) and hyperpolarizing (IPSPs) inputs.
    • EPSPs (Depolarizations): Drive VmV_m upward toward threshold by admitting cations.
    • IPSPs (Hyperpolarizations): Drive VmV_m downward away from threshold by releasing cations (K+K^+) or admitting anions (Cl−Cl^-).
    • Simultaneous activation of an excitatory synapse (depolarization) and an inhibitory synapse (hyperpolarization) can neutralize the net electrical change, causing the membrane potential at the axon hillock to remain unchanged at resting potential (−70 mV-70\,\text{mV}).
    • The net voltage effect at the axon hillock is determined by the relative sizes, timing, and proximity of opposing depolarizing and hyperpolarizing potentials.

Algebraic summation of simultaneous depolarizing and hyperpolarizing inputs resulting in net cancellation

Interactive Discussion Questions and Problem Sets

  • Discussion 1: Direction of Non-Polar Solute Flux

    • Question: Consider small, blue, non-polar molecules with a high extracellular concentration and a low intracellular concentration. Predict the net direction of movement across an unassisted plasma membrane.
    • Answer: Option A — There is a net influx (movement from outside to inside the cell). Because the molecules are small and non-polar, they diffuse freely through the lipid bilayer down their chemical concentration gradient without requiring transport proteins.
  • Discussion 2: Movement of Charged Molecules in the Presence of Channels

    • Question: If a channel protein specific for a blue charged molecule is inserted into the membrane, what determines its net movement?
    • Answer: Ion movement cannot be predicted solely by concentration differences. Charged molecules are governed by the electrochemical gradient (the combination of the chemical concentration gradient and the electrical membrane potential VmV_m).
  • Discussion 3: Cellular Distribution of Electrical Signals

    • Question: In which regions of a neuron do electrical signals occur?
    • Answer: Electrical signals occur in the dendrites, cell body, axon, and axon terminal. Graded potentials operate in dendrites and cell bodies; electrotonic current conducts charge to the axon hillock; action potentials propagate along the axon; and voltage-gated calcium flux occurs at the axon terminal.
  • Discussion 4: Why Electrotonic Current Decays Over Distance

    • Question: Identify two physical mechanisms responsible for the decay of electrotonic current as it spreads through the soma.
    • Answer:
    1. Electrical resistance of the cytoplasm, which dissipates charge energy as ions collide with cytosolic components.
    2. Leakage of ions across the plasma membrane through constitutively open leak channels (K+K^+ leak pathways), reducing the magnitude of intracellular charge over distance.
  • Discussion 5: Action Potential Trigger Likelihood

    • Question: Which of the following electrical events is most likely to trigger an action potential?
    • A. A hyperpolarizing graded potential at the axon hillock
    • B. A depolarizing graded potential at the axon hillock
    • C. A hyperpolarizing graded potential at a dendrite
    • D. A depolarizing graded potential at a dendrite
    • Answer: Option B — A depolarizing graded potential at the axon hillock. A depolarizing input at the axon hillock acts directly at the trigger zone without undergoing the electrotonic decay that diminishes signals traveling from distant dendrites.
  • Discussion 6: Mathematical Summation at the Axon Hillock

    • Problem Scenario: At the axon hillock of a neuron, three graded potentials arrive simultaneously:
    • Potential 1: Depolarization of +13 mV+13\,\text{mV}
    • Potential 2: Hyperpolarization of −11 mV-11\,\text{mV}
    • Potential 3: Depolarization of +14 mV+14\,\text{mV}
    • Baseline parameters: Resting membrane potential is −70 mV-70\,\text{mV}; threshold potential is −55 mV-55\,\text{mV}.
    • Question: Will the axon hillock trigger an action potential?
    • Step-by-Step Calculation:
    • Calculate the net voltage change (ΔV\Delta V) from algebraic summation:       ΔV=(+13 mV)+(−11 mV)+(+14 mV)=+16 mV\Delta V = (+13\,\text{mV}) + (-11\,\text{mV}) + (+14\,\text{mV}) = +16\,\text{mV}
    • Determine the resulting membrane potential at the axon hillock:       Vhillock=−70 mV+16 mV=−54 mVV_{\text{hillock}} = -70\,\text{mV} + 16\,\text{mV} = -54\,\text{mV}
    • Compare VhillockV_{\text{hillock}} to the threshold:       −54 mV>−55 mV-54\,\text{mV} > -55\,\text{mV}
    • Conclusion: Option D — Yes, the membrane potential will be depolarized to −54 mV-54\,\text{mV}, which is above the threshold of −55 mV-55\,\text{mV}, triggering an action potential.
  • Discussion 7: Long-Term Consequences of Ouabain Poisoning

    • Question: What happens to the membrane potential over time when a cell is exposed to ouabain?
    • Answer: Option C — The membrane potential approaches zero. Inhibiting the Na+/K+-ATPaseNa^+/K^+\text{-ATPase} prevents the active restoration of leaking ions. Over time, passive diffusion through leak channels dissipates the concentration gradients of Na+Na^+ and K+K^+, eliminating the electrochemical gradient and driving VmV_m to 0 mV0\,\text{mV}.