Registered Behavior Technician Training: Behavior Chains and Chaining Procedures

Introduction to Behavior Chains

  • Definition of a Behavior Chain:

    • Defined by Cooper, Heron, and Hubert as a specific sequence of discrete responses, each associated with a particular stimulus condition.
    • A set of component responses that, when completed in a specific, designated order, form a larger comprehensive response.
  • Everyday Examples of Behavior Chains:

    • Putting on a shirt
    • Brushing hair
    • Washing hands
    • Completing a long division problem
    • Preparing a meal
    • Using the bathroom
    • Tying shoes
    • Sending an email
    • Vacuuming the floor
  • Essential Characteristics of Behavior Chains:

    • All tasks require specific component responses performed in a precise sequence to achieve complete task completion.
    • If any single component response is omitted or performed incorrectly, the overarching task is considered incomplete.
    • Example: In the behavior chain of sending an email, omitting the specific step of typing in the recipient's email address prevents the chain from being successfully completed.
    • Completion of the entire behavior chain relies on the successful execution of each individual component response.
    • Each component response in the chain is signaled by the completion of the response preceding it.

The Three-Term Contingency in Behavior Chains

  • Antecedent-Behavior-Consequence Structure:

    • Every component response within a behavior chain is governed by an antecedent stimulus that evokes it and a consequence that reinforces it.
    • Applied Example: Opening a Locked Door
      • Step 1: Antecedent = Presence of a locked door; Response = Take keys out of pocket; Consequence = Keys in hand.
      • Step 2: Antecedent = Keys in hand; Response = Insert key into keyhole; Consequence = Key in keyhole.
      • Step 3: Antecedent = Key in keyhole; Response = Turn key; Consequence = Key turned / lock unlocked.
      • Step 4: Antecedent = Key turned / lock unlocked; Response = Turn door handle; Consequence = Handle turned.
      • Step 5: Antecedent = Handle turned; Response = Push door open; Consequence = Door opened.
  • Interplay Between Antecedents and Consequences:

    • Each naturally occurring consequence acts as reinforcement for the response that immediately preceded it.
    • Crucially, the consequence that reinforces the previous response simultaneously serves as the antecedent stimulus evoking the subsequent response in the chain.
    • This continuous dual-functioning interplay maintains the sequential flow of all component responses in the chain.
  • Terminal Reinforcer:

    • The terminal reinforcer is the final consequence occurring at the conclusion of the entire behavior chain (e.g., the door successfully opening).

Task Analysis (TA)

  • Definition and Core Function:

    • A task analysis (TA) is a written list breaking down a behavior chain into its specific, discrete component responses.
    • A task analysis is always created prior to beginning instruction on the behavior chain.
    • Example: A written task analysis for putting on a shirt lists every discrete physical response in exact sequence.
  • Purposes of a Task Analysis:

    1. Provides the instructor with the exact responses that need to be taught.
    2. Establishes the precise sequence in which component responses must be instructed.
    3. Promotes instructional consistency among multiple teachers or clinicians teaching the same skill to a student.
    4. Serves as the primary tool for data collection and progress evaluation.
  • Methods for Creating a Task Analysis:

    • Primary Method: Personally perform each component response of the behavior chain, writing down each step as it is performed.
    • Peer Review / Feedback: Share the drafted task analysis with others for review. Because individuals perform chains differently (e.g., wetting a toothbrush before applying toothpaste versus wetting it after), external feedback helps identify the most logical sequence for the specific learner.
  • Key Considerations When Drafting a Task Analysis:

    • Environmental Factors & Available Materials: The environment dictates necessary steps. For example, a handwashing TA designed for home differs from a school bathroom TA based on sink controls, soap dispenser mechanics, and hand-drying equipment.
    • Individual Learner Capabilities: Modify steps based on client needs. For example, a shorter child may require additional steps, such as fetching and standing on a step stool, to independently wash hands.

Chaining Procedures

  • Overview:

    • Chaining procedures are systematic techniques used to teach behavior chains.
    • The three primary chaining procedures are forward chaining, backward chaining, and total task chaining.
  • Forward Chaining:

    • Methodology: Steps are taught one at a time in sequential order, starting with the very first step in the task analysis.
    • Instructional Sequence:
      1. Teach the learner to independently complete Step 1.
      2. Once Step 1 is mastered, teach Step 1 followed by Step 2.
      3. As each step is mastered, the next step in the sequence is added to the teaching requirement.
    • Reinforcement Strategy:
      • Reinforcement is delivered immediately following the completion of the step currently being taught.
      • The behavior chain is halted after the target teaching step is completed so reinforcement can be provided.
      • Remaining steps in the chain following reinforcement delivery are either fully prompted by the instructor or left uncompleted, depending on client needs and the target task.
    • Examples:
      • Shoe Tying:
        • Step 1 Teaching: Prompt learner to pick up laces in each hand and cross them. Deliver reward (e.g., token) and praise. Fade prompts by shadowing until Step 1 is independent.
        • Step 2 Teaching: Once Step 1 is independent, require Step 1 and Step 2 (pull right lace under left lace and pull tight). Deliver enthusiastic praise and reinforcement only after Step 2 is completed.
      • Putting on a Shirt:
        • Prompt Step 1 (pull shirt over head). Provide praise and reward upon completion.
        • Once Step 1 is independent, prompt Step 2 (put one arm through sleeve). Provide praise and reward upon completion.
        • Continue sequentially until all steps are completed independently.
  • Backward Chaining:

    • Methodology: All steps of the behavior chain are completed for or with the student by the instructor, except for the final step.
    • Instructional Sequence:
      1. Teach the learner to independently complete only the last step of the chain.
      2. Once the last step is mastered, teach the second-to-last step combined with the last step.
      3. Additional steps are added in reverse sequence one by one as prior steps are mastered.
    • Handwashing Example:
      • Fully prompt Steps 1 through 11; teach Step 12 (hang up the towel) independently.
      • Once Step 12 is mastered, fully prompt Steps 1 through 10; teach Step 11 (wipe off left hand) and Step 12 until both are independent.
    • Reinforcement Strategy:
      • Reinforcement is delivered only after the learner completes the final step of the behavior chain.
      • Contrived Reinforcers: An artificial reward unrelated to the task (e.g., giving a child a toy after handwashing) may be used if needed.
      • Natural Reinforcers: The terminal step and its natural outcome often provide inherent reinforcement (e.g., completing the last step of preparing a snack yields edible food ready to consume), making contrived reinforcers unnecessary in some cases.
    • Putting on a Shirt Example:
      • Prompt all initial steps; teach the client to perform the final step (pulling the shirt down) -> Provide praise and reward.
      • Once mastered, teach the second-to-last step followed by the last step in reverse order until the entire chain is performed independently.
  • Total Task Chaining:

    • Methodology: The learner is taught every single step of the behavior chain in sequential order during every teaching opportunity.
    • Instructional Sequence:
      • The instructor provides physical assistance/prompts for any specific steps the learner cannot yet complete independently.
      • Praise is delivered as each step is completed, and terminal reinforcement (praise plus a reward) is provided at the end of the entire chain.
      • Prompts are faded across trials by progressively reducing physical guidance.

Graduated Guidance

  • Definition:

    • A prompting procedure commonly utilized during total task chaining involving the systematic, gradual removal of physical prompts.
    • Begins with maximum physical guidance, gradually decreasing the proximity and intensity of the prompt over time until prompts are delivered only as necessary.
  • Prompt Fading Sequence:

    1. Full physical assistance at the learner's hand.
    2. Gradual reduction to the learner's elbow.
    3. Gradual reduction to the learner's shoulder.
    4. Shadowing the learner's movements closely without physical contact.
    5. Providing physical prompts only as necessary when independence is demonstrated.

Selection Guidelines for Chaining Procedures

  • General Considerations:

    • Selection depends on individual client traits, learning history, and skill characteristics.
  • When to Use Total Task Chaining:

    • The client already possesses prerequisite knowledge or can independently complete several steps of the behavior chain.
    • The client is a rapid learner who acquires behavior chains quickly (using forward or backward chaining could impede learning momentum).
  • When to Use Forward Chaining:

    • The client experiences difficulty acquiring multiple steps simultaneously, requiring dedicated focus on single-step mastery.
    • The behavior chain starts with relatively easy responses, allowing the learner to experience immediate success and build behavioral momentum for more complex responses later in the chain.
  • When to Use Backward Chaining:

    • The client experiences difficulty acquiring multiple steps simultaneously.
    • The terminal step of the behavior chain yields a highly reinforcing natural outcome (e.g., access to a snack), allowing frequent immediate contact with natural reinforcers during early learning.

Data Collection and Evaluation

  • Data Collection Tool:

    • Data are directly recorded on the written task analysis form during teaching sessions.
  • Scoring System:

    • Each targeted step is scored using standard symbols:
      • Plus symbol (++) indicates an independent response.
      • Minus symbol (−-) indicates a prompted response.
  • Scoring Rules by Chaining Procedure:

    • Forward Chaining: The instructor scores only the specific initial step(s) currently designated for independent completion.
    • Backward Chaining: The instructor scores only the specific terminal step(s) currently designated for independent completion.
    • Total Task Chaining: The instructor scores all steps of the task analysis during every teaching trial.
  • Data Evaluation:

    • Data recorded on the task analysis are examined after each teaching opportunity to measure acquisition trends and guide instructional modifications.