AcDec Math 2026-2027
Simple and Compound Interest
Fundamentals of Interest: Mathematics is fundamental to economics and banking, specifically in the calculation of interest for loans (such as car or home loans) or investments.
Simple Interest Definition: A situation is described as using simple interest if the amount of interest charged does not change from one time period to the next. It is calculated primarily through multiplication.
Simple Interest Formula:
Amount of interest:
Total amount owed at the end of a loan: or
Where is the initial principal, is the interest rate per time period, and is the number of time periods.
Simple Interest Example:
If you loan a friend at a rate of per month, this represents a monthly interest rate of . If after six months the friend pays the loan back, the total owed is .
Another scenario: borrowing at simple interest per week and ending with a debt of . To find the time , solve , resulting in weeks.
Compound Interest Definition: A situation uses compound interest if the interest earned during each time period is added to the principal when determining the interest for the next period. Essentially, this is "interest on interest."
Rationale for Compound Interest: Simple interest does not accurately reflect the value of money over time. If a borrower fails to pay interest, that interest could have been re-loaned at the same rate to someone else. Compounding allows the lender to recoup that potential loss.
Compound Interest Mathematical Sequence:
Starting with at monthly interest over six months without intermediate payments:
Month 1:
Month 2:
Month 3:
Month 4:
Month 5:
Month 6: 80.5255 + (0.1) \times 80.5255 = \88.57805 \approx \
Comparison: The compound interest results in an additional over the simple interest total of .
Reporting Interest Rates: Banks typically report an Annual Percentage Rate (APR). However, interest is often compounded monthly or daily. The account earns a fraction of the APR at each interval. For example, APR compounded monthly earns at each compounding.
General Compound Interest Formula:
Where is the initial amount, is the interest rate (usually ), is the number of compoundings per year, and is the number of years. The exponent represents the total number of compoundings.
Examples of Compound Interest Calculation:
Invest at APR compounded quarterly for seven years: .
Invest for five years at APR compounded monthly ( total compoundings): .
Finding Initial Investment: If an account has after eight years at APR compounded quarterly ( compoundings), the initial principal is found via . Solving for gives .
Doubling Time: To find the rate needed for an investment to double in years with monthly compounding: . Solving yields . Multiplying by compoundings per year gives an APR of or .
Basic Counting and the Multiplication Principle
The Scope of Counting: Mathematical counting, or combinatorics, addresses how many ways events can occur across varied contexts like restaurant menus, bookshelf arrangements, outfits, or race finishes.
Multiplication Rule (First Form): When selecting two objects from different groups, the total number of ways to select both is the product of the number of ways to select each object individually.
Example: A pizza shop with toppings (Cheese, Pepperoni, Sausage, Mushroom) and crusts (Thin, Regular, Thick) offers different types of pizza.
Expanded Example: crust choices and toppings results in possibilities.
Selecting from the Same Group: Selecting two objects from the same group introduces complexity based on whether repetition or order matters.
Scenario 1 (Repetition allowed, Order matters): Employee ID codes using two letters. There are possible codes (AA is valid).
Scenario 2 (No repetition, Order matters): Selecting a President and Vice President from a team of . There are choices for President and left for Vice President, totaling .
Scenario 3 (No repetition, Order doesn't matter): Watching two movies from a collection of episodes of Trek Wars. If watching Episode II then V is the same as V then II, the total permutations () must be halved to eliminate duplicates, resulting in unique pairs.
Multiplication Rule (Final Form): When selecting objects from different groups or when order matters, the total number of possibilities is , where is the number of ways to select the th object.
Pizza Example (3D model): sizes, crusts, and toppings results in total combinations.
Outfit Example: shirts, pants, pairs of shoes, belts, and ties gives possible outfits.
Race Sequence Example: runners in a dash. The finish sequences are .
Complex Counting (Phone Numbers): Within a given area code (7-digit number):
Raw total: .
Restrictions: Numbers cannot start with (international) or (long-distance), leaving choices for the first digit. Specific codes like or at the start are disallowed. There are numbers for each prohibited 3-digit prefix. Calculation: valid numbers.
Permutations and Combinations
Permutations Definition: A selection of objects from a group where no object can be used more than once and the order of selection matters. Often answers "How many arrangements?"
Combinations Definition: A selection of objects from a group where no object can be used more than once and the order of selection does not matter. Often answers "How many different groups?"
Factorial Notation: The symbol "!" means to multiply every whole number from the indicated number down to .
Example: .
Random alphabet arrangements ( letters in a line): , approximately .
Special Definition: .
Permutations Formula: The number of ways to select objects out of objects where order matters is given by:
Example: Selecting competitors from a group of and assigning them specific problems: .
Combinations Formula: The number of ways to select objects out of objects where order does not matter is given by:
Notation: is read as " choose ."
Rationale for Over-counting: For any group of objects selected, there are permutations as predicted by the multiplication rule. Since combinations treat these arrangements as one group, the permutation total is divided by .
Combinations Applications:
Cookie Sampler Bag: From cookie types (Chocolate Chip, Sugar, Oatmeal, Peanut Butter, Raisin), a bag of different types is a combination. Total groups: .
Committee Selection: A 5-member committee from a club of : .
Textbook Arrangements: Arranging identical science books and identical social studies books on a shelf of spots. This is equivalent to choosing spots for science books: . Note that .
Letter Rearranging (corduroy): Total letters = , with two "o's" and two "r's". Ways to place the o's: . Ways to place the r's: . Remaining letters: . Total: .
Binomial Expansion: In the expansion of , the coefficients of terms like are . Coefficient of .
Probability of Equally Likely Events and Binomial Distribution
Equally Likely Events: A set of outcomes where each outcome has the same chance of occurring (e.g., fair dice, fair coins, standard card deck). Outcomes like a light turning on vs. an electrical fire starting are not equally likely.
Basic Probability Formula: If all outcomes are equally likely, the probability of event is:
Examples: Rolling a on a 6-sided die: . Drawing a King from a deck: .
Probability Calculations:
Flipping coins (All Heads): . Only one way for all heads (HHHHH), so .
Flipping coins ( Heads, Tails): Ways to choose spots for heads = . .
Poker (Four of a Kind): Total hands from 52 cards = . To get a four of a kind: choose one of values ( ways), then choose a fifth card from the remaining . Total hands = . .
Dice Sums:
Rolling two dice (Sum of ): Total outcomes = . Ways to get sum can be modeled as placing extra dots across two dice (each die already has 1). Using "lineup" representation ( for separator, for dots), "" means a and a . Ways = . . Correct pairs: .
Rolling three dice (Sum of ): Total outcomes = . Total ways with floating dots across three dice: . However, we must subtract illegal rolls where any die exceeds . Illegal cases: adding dots to one die ( ways), to one die (6 ways), and to one die (9 ways). Total illegal = . Valid ways = . .
Binomial Distribution:
Applicable when an action with constant probability repeats, and we seek the probability of a specific number of "successes."
Formula: , where is successes, is failures, is repetitions, is desired successes, and is desired failures.
Example: Rolling dice, probability of exactly six 's (): .
Large-Scale Binomial Problem (Science Quiz):
multiple-choice questions, choices each. Guessing on all. Guessing at least correct to pass.
Total ways to answer: .
Ways for exactly correct: .
Passing probability: Sum of ways for correct divided by . Total passing ways: . .
Geometry – Pythagorean Theorem and Square Roots
Pythagorean Theorem Basis: Historically, the concept of irrational numbers like or arose from geometric problems, specifically finding side lengths of squares with specific areas.
Constructing Area : Drawing diagonals of unit squares creates a new square. The area is exactly (half of a square), identifying the side length as .
Constructing Area : Placing four triangles (area each: ) around a central square (area ). The resulting interior square has area , identifying the side length as .
Theorem Statement: The sum of the areas of the squares built off of the legs of a right triangle is equal to the area of the square built off of the hypotenuse. Symbolically: .
Irrational Approximations: on a calculator is , but this is only an approximation. Squaring it results in . Exact radical form should be used as a number in its own right.
Pythagorean Triples: Sets of three whole numbers satisfying the theorem. Examples:
Theorem in Three Dimensions: The distance from the origin to a point or the diagonal of a box with length , width , and height is:
Example: A box with dimensions has a diagonal of . Thus, a 5-foot pole fits.
Pythagorean Quadruple: A set of four integers such that (e.g., ).
Special Right Triangles
45–45–90 Triangle (Isosceles Right Triangle):
If the leg length is , the hypotenuse is .
Example: Leg length of results in a hypotenuse of ().
Example: Hypotenuse of results in leg lengths of ().
30–60–90 Triangle:
Generated by bisecting an equilateral triangle.
If the side opposite the angle (short leg) is , the hypotenuse is , and the side opposite the angle (long leg) is .
Example: Short leg of results in a hypotenuse of and a long leg of .
Example: Long leg of results in a short leg of and a hypotenuse of .
Nested 30–60–90 Triangles: In a large 30–60–90 triangle with a long leg of , the perpendicular distance from the right-angle vertex to the hypotenuse can be found. This distance is the short leg of a medium-sized 30–60–90 triangle within the figure. If the medium triangle's hypotenuse is , the required distance is .
Coordinate Geometry: Midpoints and Slope
The Utility of Coordinates: Adding a coordinate system ( lattice) to geometry allows representing geometric concepts algebraically and deriving numerical formulas for values.
Midpoint Formula: The middle of a line segment between and is calculated by averaging the coordinates:
Example: Midpoint of and is .
Extension to Higher Dimensions: Midpoint of and is .
Backward Midpoint: Given midpoint and endpoint , the other endpoint is found via and , resulting in .
Slope (m): The ratio of the difference in -coordinates to the difference in -coordinates:
Slope as Movement: A movement in the plane can be denoted by chevron brackets . Collinear points share a direction such that the movement between any two is a multiple of the movement between others ().
Vertical line slope is undefined (); horizontal line slope is ().
Vector Equation of a Line: .
Parabola Property (y = x²): If the -coordinates of two points on the graph of sum to , the slope between them is .
Generalization: If , then the slope between and is .
Proof: .
Coordinate Geometry: Distance and Equations
Distance Formula: Derived from the Pythagorean theorem, the distance between and is:
3D Distance: .
Equation of a Circle: Set of all points at distance from center :
Equation of a Sphere: Set of all points at distance from center :
Shortest Distance from Point to Line: Specifically the perpendicular distance.
Algebraic approach (minimizing distance function) and geometric approach (vector projections) are both possible.
Example: Distance from to is .
Parallel and Perpendicular Lines:
Parallel lines have the same slope.
Perpendicular lines have slopes that are negative reciprocals ( and ).
Perpendicularity in 3D: Movements and are perpendicular if .
Plane Equation: . Any movement between two points in this plane is perpendicular to the vector .
Properties of Quadrilaterals and Polygons
Classifying Quadrilaterals by Diagonals:
Perpendicular diagonals: Square, Rhombus, Kite.
Diagonals bisect each other: Parallelogram, Square, Rectangle, Rhombus.
Only one diagonal bisected by the other: Kite.
Polygon Angles:
Sum of interior angles of an -sided polygon: .
Valid for both convex (all angles ) and concave (at least one angle ) polygons.
Polygon Diagonals:
Number of diagonals in a convex -sided polygon: .
Each of the vertices connects to non-adjacent vertices, divided by to avoid double counting.
Area of Regular Polygons:
A regular polygon is equilateral and equiangular.
Can be subdivided into congruent isosceles triangles.
Area formula: .
Hexagon (): Six equilateral triangles ().
Decagon (): .
Volume and Surface Area of 3D Figures
Prisms:
Surface Area: Sum of areas of all two-dimensional faces.
Cylinders:
Pyramids:
Surface Area: Base area plus areas of surrounding triangles (calculated using slant height).
Cones:
, where is the slant height ().
Spheres:
The surface area of a sphere is equal to the surface area of an open cylinder () that perfectly encloses it (Archimedes' Proof).
Similarity and Circle Theorems
Similarity Ratios: If side length ratio is , then Perimeter ratio is , Area ratio is , and Volume ratio is .
Circle Geometry:
Central Angle: Angle at the center equals the arc angle.
Inscribed Angle Theorem: Angle with vertex on the circle equals half the intercepted arc.
Intersecting Chords Theorem: Angle = Average of intercepted arcs. Length = .
Intersecting Secants (External): Angle = Half the difference of intercepted arcs. Length = .
Tangent Line: Perpendicular to the radius at the point of tangency. Two tangents from an external point are equal in length ().
Introduction to Differential Calculus
Limits: A limit is a value a graph approaches as the -value nears a certain point, even if the graph never reaches it.
Notation: .
Continuity: A function is continuous if .
Limits to infinity: , .
The First Derivative (): The slope of the line tangent to the graph at a specific point.
For , .
For , .
The Power Rule: For any function , the derivative is .
Calculated by the limit of the slope between and as .
expansion starts with . Subtracting and dividing by leaves as the only term without an factor as .
Graph Applications:
Linear Tangent Equations: Tangent to at . Slope . Point . Equation: .
Horizontal Tangents: Occur where . For , . Tangents occur at and .
Review Questions and Discussion
Compound vs Simple Interest: Calculate difference for at APR for years (monthly compounding vs simple).
Tripling Investment: Find APR if value triples in years (compounded weekly).
Limit of Compounding: Explore results as is compounded monthly, hourly, then every second at APR. Observe approaching the constant .
Superfectas vs Boxed Superfectas:
Superfecta (order matters): .
Boxed (order doesn't matter): .
Cost relationship: A boxed superfecta should cost \2 \times 4! = \ since it covers possible orderings.
Calculus Rates: Find average rate of change for between and .