Series Circuit Analysis and Calculations

A series circuit consists of circuit components connected end-to-end along a single conductive path, ensuring that current flow remains identical through every element.
Circuit Parameters
- Supply Voltage (V1): 48.00V
- Reference Nodes: a,b,c,d,e
- Resistor R1 (between nodes a and b): 27Ω
- Resistor R2 (between nodes b and c): 18Ω
- Resistor R3 (between nodes c and d): 36Ω
- Resistor R4 (between nodes d and e): 30Ω
- Total Equivalent Resistance (RT):
RT=R1+R2+R3+R4
- Total System Current (IT):
IT=RTV1
- Individual Resistor Voltage Drops (VRn):
VRn=IT×Rn
- Individual Resistor Power Dissipation (PRn):
PRn=VRn×IT=IT2×Rn
- Total Circuit Power (PT):
PT=V1×IT=PR1+PR2+PR3+PR4
Mathematical Determinations
Total Equivalent Resistance (RT):
RT=27Ω+18Ω+36Ω+30Ω=111Ω
Total System Current (IT):
IT=111Ω48.00V≈0.43243A=432.43mA
Individual Voltage Drops:
- VR1=432.43mA×27Ω=11.68V
- VR2=432.43mA×18Ω=7.78V
- VR3=432.43mA×36Ω=15.57V
- VR4=432.43mA×30Ω=12.97V
- Total Summed Voltage: 11.68V+7.78V+15.57V+12.97V=48.00V
Individual Power Dissipations:
- PR1=11.68V×0.43243A=5.05W
- PR2=7.78V×0.43243A=3.37W
- PR3=15.57V×0.43243A=6.73W
- PR4=12.97V×0.43243A=5.61W
- Total Dissipated Power: PT=5.05W+3.37W+6.73W+5.61W=20.76W
Summary Data Table
| Component | Resistance | Voltage Drop | Branch Current | Power Dissipation |
|---|
| R1 | 27Ω | 11.68V | 432.43mA | 5.05W |
| R2 | 18Ω | 7.78V | 432.43mA | 3.37W |
| R3 | 36Ω | 15.57V | 432.43mA | 6.73W |
| R4 | 30Ω | 12.97V | 432.43mA | 5.61W |
| Total (T) | 111Ω | 48.00V | 432.43mA | 20.76W |
Parallel Circuit Analysis and Calculations

In a parallel circuit, loads are connected across common nodes, providing multiple paths for current to flow. The voltage across each parallel load remains equal to the input source voltage.
Circuit Parameters
- Source Voltage (Vin): 12V
- Load R1: 48Ω
- Load R2: 72Ω
- Load R3: 56Ω
- Load R4: 68Ω
- Node Voltage across Branch n (VRn):
VR1=VR2=VR3=VR4=Vin=12V
- Total Equivalent Resistance (RT):
RT=R11+R21+R31+R411
- Branch Current (IRn):
IRn=RnVin
- Total Circuit Current (IT):
IT=IR1+IR2+IR3+IR4
- Branch Power Dissipation (PRn):
PRn=Vin×IRn
- Total System Power (PT):
PT=Vin×IT=PR1+PR2+PR3+PR4
Mathematical Determinations
Branch Currents:
- IR1=48Ω12V=0.25000A=250.00mA
- IR2=72Ω12V≈0.16667A=166.67mA
- IR3=56Ω12V≈0.21429A=214.29mA
- IR4=68Ω12V≈0.17647A=176.47mA
Total System Current (IT):
IT=250.00mA+166.67mA+214.29mA+176.47mA=807.42mA=0.80742A
Total Equivalent Resistance (RT):
RT=0.80742A12V=14.86Ω
Power Dissipated by Each Load:
- PR1=12V×0.25000A=3.00W
- PR2=12V×0.16667A=2.00W
- PR3=12V×0.21429A=2.57W
- PR4=12V×0.17647A=2.12W
- Total Circuit Power (PT): PT=3.00W+2.00W+2.57W+2.12W=9.69W
Summary Data Table
| Component | Resistance | Voltage Drop | Branch Current | Power Dissipation |
|---|
| R1 | 48Ω | 12V | 250.00mA | 3.00W |
| R2 | 72Ω | 12V | 166.67mA | 2.00W |
| R3 | 56Ω | 12V | 214.29mA | 2.57W |
| R4 | 68Ω | 12V | 176.47mA | 2.12W |
| Total (T) | 14.86Ω | 12V | 807.42mA | 9.69W |
Fault Conditions in Parallel Circuit
Evaluating system behavior when component R3 (56Ω) experiences a fault:
- Burned Open Failure (R3→∞):
- Current flow through branch 3 drops to 0A.
- Current through remaining parallel branches (R1,R2,R4) stays unchanged because voltage remains constant at 12V.
- Total current IT drops by 214.29mA to 593.13mA.
- Total system resistance RT increases.
- Short Circuit Failure (R3→0Ω):
- Equivalent resistance of the parallel network drops to 0Ω
- Excessive current is drawn from the source Vin, tripping circuit protection devices (fuses/breakers) and bypassing current away from other branches.
Calculating Equivalent Resistance of Parallel Circuits via Calculator

Calculating total equivalent resistance for multiple parallel resistors using a scientific calculator (such as a CASIO fx-991MS S-V.P.A.M.) utilizes reciprocal key operations (x−1) and scientific notation exponent keys (EXP).
Theoretical Equation
RT=R11+R21+R311=1.2kΩ1+820Ω1+2MΩ11
Parameter Definitions
- R1=1.2kΩ=1.2×103Ω=1200Ω
- R2=820Ω
- R3=2MΩ=2×106Ω=2000000Ω
Calculator Execution Methods
Two-Step Method
- Calculate sum of reciprocals (denominator):
1.2 EXP 3 x^-1 + 820 x^-1 + 2 EXP 6 x^-1 = denominator answer - Invert the denominator answer to obtain RT:
Denominator answer x^-1 = 487 = Rtotal
One-Step Method
Execute the complete expression using grouping parentheses:
(1.2 EXP 3 x^-1 + 820 x^-1 + 2 EXP 6 x^-1)x^-1 = 487
Evaluation Result
RT=487Ω
Circuit Diagnostics and Measurements Under Fault Conditions

Knowledge of open circuits and short circuits in series and parallel networks is fundamental for circuit troubleshooting and diagnostic voltage/resistance measurements.
Diagnostic Circuit Configuration
- Supply Voltage (V1): 120V connected between node a and grounded node e
- Protective Device: Fuse F1 rated for 0.5AMP, positioned between node a and node b
- Resistor R1: 2Ω
- Resistor R2: 4Ω
- Resistor R3: 3Ω
- Resistor R4: 5Ω
- Meter Placement: High-impedance digital multimeter leads connected directly across the terminals of blown fuse F1 (nodes a and b).
Diagnostic Measurements Analysis
a. Expected Resistance Seen by Meter across Blown Fuse
- Measurement:
OL (Over Limit / Infinite Resistance) - Explanation: The internal filament of fuse F1 has melted open. A meter measuring resistance across an open gap reads an infinitely high resistance value, displayed as
OL.
b. Expected Voltage Seen by Meter across Blown Fuse
- Measurement: 120V (Full Supply/Input Voltage)
- Explanation: Because fuse F1 is open, zero current flows through any downstream series resistors (R1,R2,R3,R4). According to Ohm's Law (V=I×R), the voltage drop across every resistor is 0V. Node b remains tied to the ground reference node e at 0V, while node a is tied directly to the positive voltage terminal at 120V. Connecting the meter across the open fuse measures the full potential difference between supply voltage and ground:
Vmeter=Va−Vb=120V−0V=120V
c. Current Flow in System
- Measurement: There is no current flow (0A).
- Explanation: An open circuit breaks electrical path continuity, preventing charge carrier movement through the loop.