Comprehensive Radiological Anatomy of the Knee Joint: Plain Radiography, Landmarks, Metrics, and Variants
Osteology and Functional Anatomy of the Distal Femur
The distal end of the femur is an expanded bony structure that forms the proximal component of the knee joint. It is structurally divided into an articular condylar region and a non-articular supracondylar region. The supracondylar region extends proximally for approximately above the condyles. Articular contact occurs via two prominent, rounded projections designated as the medial femoral condyle and the lateral femoral condyle. Posteriorly and inferiorly, these condyles articulate with the proximal tibia to form the tibiofemoral joint, while anteriorly they articulate with the patella to establish the patellofemoral joint.
The lateral femoral condyle is more prominent along its anterior aspect than its medial counterpart, providing a mechanical bony barrier that resists lateral subluxation and dislocation of the patella. Conversely, the medial femoral condyle is larger, significantly more convex, and extends further distally than the lateral condyle. Because the medial condyle projects more distally than the lateral condyle, it establishes the physiological varus (inward angulation) characteristic of the human knee joint.
Projecting superiorly from the articular condyles are the non-articular medial and lateral epicondyles. The medial epicondyle is noticeably larger than the lateral epicondyle. At the superior-most margin of the medial epicondyle lies a distinct bony prominence termed the adductor tubercle, which provides the insertion site for the adductor group of muscles. Although the epicondyles do not participate directly in joint articulations, they provide critical mechanical anchorage for the collateral ligaments responsible for mediolateral stability: the medial collateral ligament originates from the medial epicondyle and attaches distally to the tibia, whereas the lateral collateral ligament originates from the lateral epicondyle and inserts onto the fibular head.
On the posterior aspect of the distal femur, situated between the medial and lateral condyles, is a deep notch known as the intercondylar fossa. This fossa serves as the intracapsular attachment site for the two cruciate ligaments. The anterior cruciate ligament (ACL) originates from a distinct facet on the medial surface of the lateral femoral condyle, while the posterior cruciate ligament (PCL) originates from a facet on the lateral surface of the medial femoral condyle.
When evaluated from an axial end-on projection, the distal femur demonstrates an overall trapezoidal configuration. The anterior surface exhibits a downward slope from lateral to medial. The lateral wall of the distal femur is inclined at an angle of relative to the vertical line, whereas the medial wall is inclined at an angle of from the vertical line. Along the anterior surface between the condylar prominences lies the trochlear groove (or trochlear notch). This smooth depression accommodates the posterior articular facets of the patella. Pathological deviations in trochlear morphology, classified by Dejour on plain radiography and cross-sectional imaging, include a flat trochlea, shallow trochlea, convex trochlea, supratrochlear cliff, and hypoplasia of the medial facet, all of which predispose to chronic patellofemoral instability.
Osteology and Structural Anatomy of the Proximal Tibia
The proximal end of the tibia is broadly expanded to support body weight and is collectively termed the tibial plateau. The plateau features two distinct articular surfaces: the medial articular facet (medial condyle) and the lateral articular facet (lateral condyle). The medial tibial facet articulates with the medial femoral condyle, and the lateral tibial facet articulates with the lateral femoral condyle. The tibial articular surfaces are separated centrally by a non-articular intercondylar region.
The intercondylar region of the tibial plateau is subdivided into three distinct anatomical zones: the anterior intercondylar region, the central intercondylar eminence, and the posterior intercondylar region. The central intercondylar eminence features two prominent upward-pointing bony projections known as the intercondylar tubercles or tibial spines: the medial tibial spine and the lateral tibial spine. The non-articular zones provide designated attachment footprints for intra-articular ligaments and meniscal horns.
The anterior intercondylar area provides attachment for the anterior cruciate ligament (ACL), the anterior horn of the medial meniscus, and a component of the anterior horn of the lateral meniscus. The posterior intercondylar area accommodates the attachment of the posterior cruciate ligament (PCL) and the posterior horn of the lateral meniscus.
The tibial shaft possesses three surfaces and three borders. The anterior border terminates superiorly in a prominent, subcutaneously palpable bony projection termed the tibial tuberosity, which anchors the patellar tendon (ligamentum patellae). On the posterior surface of the proximal tibia, an oblique bony ridge termed the soleal line runs inferiorly and medially, providing the origin for the soleus muscle. The lateral border presents the sharp interosseous crest, providing attachment for the crural interosseous membrane spanning between the tibia and fibula. On the anterolateral aspect of the proximal tibia, just inferior to the articular margin of the lateral tibial condyle, lies Gerdy's tubercle, a faceted bony prominence serving as the distal insertion site for the iliotibial band.
Morphology and Variant Anatomy of the Patella
The patella is the largest sesamoid bone in the human body, fully embedded within the continuity of the quadriceps tendon. It is triangular in profile, featuring a broad superior base (superior pole on lateral radiographs) and a pointed inferior apex (inferior pole). The anterior surface is convex and grooved by vertical fibers of the quadriceps mechanism. The posterior articular surface is divided into a medial facet and a larger lateral facet by a vertical bony ridge designated as the median patellar ridge. This ridge tracks directly within the deepest point of the femoral trochlear groove.
A secondary articular zone termed the odd facet is located on the extreme superomedial aspect of the medial patellar facet. The odd facet possesses its own distinct hyaline articular cartilage layer and is occasionally demarcated from the medial facet by a subtle vertical ridge. Individuals possessing a well-developed odd facet are predisposed to earlier onset and accelerated progression of patellofemoral osteoarthritis.
Congenital variants of patellar ossification are frequently encountered on plain radiographs and must be distinguished from fractures. Bipartite and multipartite patellae arise from failure of fusion of accessory secondary ossification centers during skeletal maturation. Bipartite patella is categorized anatomically using Saupe's classification: Type I involves the inferior pole and accounts for less than of presentations; Type II occurs along the lateral patellar border and constitutes of cases; Type III is situated at the superolateral margin, representing the most common presentation at approximately of cases. Multipartite patella denotes multiple unfused accessory centers, categorized into superolateral bipartite, lateral bipartite, combined superolateral and lateral tripartite, and isolated superolateral tripartite variants. Unfused accessory ossicles can become symptomatic, presenting as anterior knee pain following acute trauma, sports participation, or chronic repetitive overuse.
Differentiating a bipartite or multipartite patella from an acute patellar fracture relies on margin analysis and volumetric assessment. Bipartite ossicles display rounded, smooth, densely sclerotic, well-corticated margins with preserved soft-tissue architecture. In a patellar fracture, the composite volume of the separated fragments matches the expected normal anatomical volume of the intact patella (). In a bipartite or multipartite patella, the total volume of the main patellar body combined with the accessory ossicles significantly exceeds the expected physiological volume of a single patella (). While subjectively appraised on plain films, definitive volume confirmation requires volumetric three-dimensional computed tomography ().
The dorsal defect of the patella is another benign normal radiological variant characterized as an asymptomatic subchondral lesion of unknown etiology. On lateral radiographs, it manifests as a subtle, shallow focal indentation along the posterior subchondral surface. On frontal (anteroposterior) radiographs, it appears as a rounded, well-circumscribed radiolucent nidus surrounded by a distinct, thin sclerotic rim located characteristically in the superolateral quadrant of the patella. It shows no surrounding bone destruction, cortical disruption, or fracture lines, and must be differentiated from subchondral infection, osteochondritis dissecans, or osteochondral fractures.
Patellar morphology on axial imaging is formally classified according to Wiberg's classification, which defines three structural configurations based on facet symmetry and concavity: Type I presents equal, symmetrical medial and lateral facets that are both concave toward the femoral condyles, representing an ideal morphology found in approximately of the population; Type II features a medial facet that is slightly smaller than the lateral facet, accompanied by mild flattening and loss of normal concavity, while the lateral facet remains dominant and concave; Type III exhibits a markedly diminutive, vertically oriented, and frequently convex medial facet, with the dominant lateral facet maintaining broad concavity.
Structural Organization and Biomechanics of the Knee Articulation
The knee is a complex synovial modified hinge joint capable of multiaxial movement. In addition to primary sagittal-plane flexion and extension, the joint accommodates secondary rotational movements, medial and lateral translation, anterior and posterior gliding, varus and valgus angulation, as well as axial compression and distraction. All articulating surfaces are capped by hyaline articular cartilage.
The tibiofemoral and patellofemoral articulations are enveloped within a single, continuous fibrous joint capsule. Weight transmission is executed almost entirely across the medial and lateral compartments of the tibiofemoral joint. Posteriorly, the fibrous capsule attaches along the proximal margins of the femoral condyles and extends down to the tibial articular margins. Anteriorly, the capsule spans from the proximal pole of the patella to the proximal tibia.
Critically, the fibrous capsule is anatomically deficient superior to the patella. Because of this superior capsular gap, the suprapatellar bursa communicates freely and directly with the central knee joint cavity. The synovial membrane lines the deep inner layer of the fibrous capsule and projects superiorly through this capsular deficiency to line the entire cavity of the suprapatellar bursa. Inflammatory thickening or incomplete embryological resorption of this continuous synovial lining predisposes patients to pathological plica formations, such as symptomatic suprapatellar or mediopatellar synovial plica syndromes.
Anteroposterior Radiographic Projections: Non-Weight-Bearing and Weight-Bearing Techniques
The anteroposterior (AP) radiographic examination of the knee is obtained as either a standard non-weight-bearing supine projection or a specialized weight-bearing upright projection. The non-weight-bearing AP view represents the baseline projection for patients presenting with generalized, non-traumatic joint pain. The patient is placed supine on the radiographic table with the knee extended and the lower limb internally rotated approximately to bring the patella and femoral condyles into a true, non-rotated AP alignment. The central ray and image receptor are centered inferior to the apex of the patella.
The weight-bearing AP view is an essential specialized projection obtained with the patient standing upright with equal weight distributed on both feet against a vertical Bucky or direct digital radiography (DDR) receptor. The lower extremities are internally rotated to maintain a true AP profile. The central ray is directed horizontally, perpendicular to the long axis of the tibia, and centered at the level of the palpable superior borders of the tibial condyles.
The weight-bearing AP view offers major diagnostic advantages over non-weight-bearing examinations. Non-weight-bearing views consistently underestimate the severity of articular cartilage loss. Standing views demonstrate true functional tibiofemoral joint space narrowing, accentuate physiological and pathological varus or valgus angular deformities, reveal subtle femorotibial subluxations, and are mandatory for the accurate preoperative and postoperative assessment of osteotomies and joint arthroplasty.
Anatomical landmarks identifiable on a properly executed AP radiograph include: the distal femoral shaft, medial and lateral femoral epicondyles, medial and lateral femoral condyles, intercondylar notch, medial and lateral tibial spines (intercondylar tubercles), medial and lateral tibial condyles, proximal tibial shaft, fibular head, fibular neck, and the styloid process of the fibula (situated at the apex of the fibular head). Along the lateral aspect of the lateral femoral condyle, a subtle cortical depression known as the popliteal groove (accommodating the popliteus tendon) is visualized. Superomedially, the adductor tubercle is seen along the apex of the medial epicondyle. Superimposed across the distal femur is the faint outline of the patella. Radiographs delineate these distinct bony borders, ridges, and grooves, but cannot demonstrate soft-tissue ligamentous structures directly.
Technical adequacy of an AP radiograph requires precise positioning and optimal exposure criteria. Proper vertical alignment must exist between the lateral and medial margins of the femoral condyles and the corresponding margins of the tibial plateau. The patella must project symmetrically over the center of the distal femur. The fibular head must partially overlap the posterolateral margin of the proximal tibia. The field of view must extend from the distal femoral metaphysis superiorly to the proximal shafts of the tibia and fibula inferiorly, including lateral and medial soft-tissue cutaneous margins. The femorotibial joint space must be projected fully open, and the intercondylar eminence must be centered directly within the intercondylar notch, confirming absence of rotational error. Optimal radiographic exposure requires that the faint cortical outline of the patella remains discernable through the distal femur, the fibular head and neck are not overexposed or burned out, trabecular bone markings are sharply delineated across all osseous structures, and adjacent periarticular soft-tissue fat planes are preserved.
Accurate evaluation of the tibiofemoral joint space requires that the central beam be aligned at to the long axis of the tibia. In normal individuals, the medial and lateral joint spaces are congruent, symmetric, and measure between in height, displaying smooth, uninterrupted cortical margins. In average-sized individuals, the central ray is directed perpendicular to the cassette. In obese patients presenting with large, prominent thighs, the knees undergo involuntary slight flexion at rest, requiring the tube to be angled cephalad (cranially) to remain parallel to the tibial articular plateau. Conversely, in very thin or hyposthenic patients, the central ray is angled caudad.
Lateral Radiographic Projections and Femoral Landmark Differentiation
The standard basic lateral radiograph of the knee is termed the turned or rolled lateral projection. The patient is placed in a lateral recumbent position resting onto the affected side. The unaffected contralateral limb is crossed over and anterior to the affected knee to stabilize the pelvis and prevent rotation. The affected knee must be flexed between . This degree of flexion tensions the patellar tendon and maintains the patellofemoral joint space in a neutral, open state. If flexion exceeds , the patella is drawn deeply into the intercondylar groove, compressing the suprapatellar pouch and obliterating small joint effusions or lipohemarthrosis. Conversely, flexion less than causes joint laxity, unstable alignment, and suboptimal positioning. The long axis of the femur is aligned with the midline of the table, and the posterior plane of the buttocks is oriented perpendicular to the film. The central beam is directed perpendicular to the long axis of the femur and centered at the middle of the superior border of the medial tibial condyle.
A true lateral position is confirmed radiographically when the posterior convex margins of the medial and lateral femoral condyles are superimposed. The fibular head must partially overlap the posterior cortex of the tibia, and both the patellofemoral and tibiofemoral joint spaces must project widely open without superimposition.
Differentiating the medial from the lateral femoral condyle on a lateral radiograph relies on three anatomical criteria: First, the medial femoral condyle extends further distally and possesses a larger, more rounded, and more convex perimeter than the lateral condyle. Second, the adductor tubercle can be identified as a small bony projection along the posterosuperior cortex of the medial condyle. Third, the anterior articular margins exhibit distinct sulci: the medial condylopatellar sulcus produces a deep, prominent anterior cortical indentation on the medial condyle, whereas the lateral condylopatellar sulcus is a very subtle, shallow, often faint indentation on the anterior surface of the lateral condyle.
Along the proximal tibia on the lateral view, the articular surface is tilted posteriorly by approximately . The medial tibial plateau appears relatively flat, whereas the lateral tibial plateau appears slightly more convex and rounded. The tibial spines project superiorly as the most pronounced structures on the plateau, with the lateral spine typically appearing sharper and taller. The patella demonstrates an attenuated, narrow inferior pole and a thicker, dense cortical boundary along its superior base.
Epiphyseal Landmarks, Contours, and Normal Variants on Lateral Radiographs
On a lateral radiograph of the distal femur, the anterior cortex transitions into the smooth, convex floor of the femoral trochlea, representing the anterior articular surface for the patella. The overlapping sagittal contours of the medial and lateral femoral condyles create a physiological radiolucent triangular area within the distal femoral metaphysis. This normal lucency is designated as Ludloff's space (or the epiphyseal triangle). It represents a normal anatomical variant caused by the relative paucity of trabecular bone between the divergent cortical outlines of the two condyles, and must not be misinterpreted as an osteolytic lesion, subchondral cyst, or neoplastic bone destruction.
The inferior boundary or floor of Ludloff's space corresponds precisely to the cortical roof of the intercondylar notch. A straight line constructed along this cortical roof is known as Blumensaat's line. Blumensaat's line is a critical reference landmark on lateral radiographs and sagittal magnetic resonance images; in an intact knee with the joint extended, the normal anterior cruciate ligament runs parallel to this line.
Anatomical variants can also present along the intercondylar eminence of the tibia. Anterior to the medial and lateral tibial spines, a third bony projection may be present, termed Parson's knob. Parson's knob is recognized as an accessory third intercondylar eminence and can provide an anomalous or expanded insertion footprint for the anterior cruciate ligament. In the presence of degenerative osteoarthritis, Parson's knob may hypertrophy significantly. Its primary differential diagnoses include an intra-articular loose body (calcified chondral fragment) or an intra-articular osteochondral mass projecting within the intercondylar fossa.
Anterior Knee Fat Pads, Bursal Recesses, and Effusion Diagnostics
Evaluation of the periarticular soft tissues on lateral radiographs focuses on the three anterior knee fat pads: the infrapatellar fat pad, the anterior suprapatellar fat pad, and the posterior suprapatellar fat pad.
The infrapatellar fat pad, widely termed Hoffa's fat pad, is a large, triangular, radiolucent mass of intracapsular, extrasynovial adipose tissue situated beneath the patella. It fills the space bounded anteriorly by the patellar tendon, posteriorly by the anterior intercondylar region of the tibia and the joint capsule, and superiorly by the inferior pole of the patella. Hoffa's fat pad exhibits sharp, well-defined radiolucent margins against the denser patellar ligament. At its inferior-most aspect, it forms an acute, sharp wedge of lucency known as the inferior recess, interposed between the deep fibers of the patellar tendon and the anterior surface of the tibia above the tibial tuberosity.
The anterior suprapatellar fat pad (quadriceps fat pad) is a thin, triangular radiolucency positioned directly posterior to the distal quadriceps tendon and immediately anterior to the suprapatellar recess. The posterior suprapatellar fat pad (prefemoral or supratrochlear fat pad) is an elongated radiolucent fat strip situated directly along the anterior cortex of the distal femoral shaft, behind the suprapatellar recess.
The suprapatellar recess (suprapatellar bursa or pouch) represents a large, superior extension of the synovial joint cavity situated directly between the anterior suprapatellar (quadriceps) fat pad and the posterior suprapatellar (prefemoral) fat pad. On a normal lateral radiograph, the non-distended suprapatellar recess is visible merely as a thin, radiopaque, thread-like soft-tissue line separating these two radiolucent fat pads. Thickening of this soft-tissue line is an exceptionally sensitive indicator of joint effusion. A soft-tissue band thickness greater than or equal to is highly suspicious for fluid accumulation, while a thickness of correlates roughly with a joint effusion of at least (every increase in pouch thickness approximately reflects of intra-articular fluid). As effusion volume accumulates, the expanding fluid separates and effaces both the prefemoral and quadriceps fat pads, generating a dense, rounded suprapatellar soft-tissue mass.
When substantial soft-tissue swelling is visualized on a lateral radiograph while the suprapatellar recess retains its razor-thin, normal thread-like appearance, the pathology is definitively localized to the extracapsular tissues (e.g., subcutaneous prepatellar bursitis or diffuse cellulitis). Because the suprapatellar pouch communicates directly with the intra-articular cavity, all true intra-articular effusions necessarily expand the suprapatellar recess.
In acute skeletal trauma, the horizontal beam (cross-table) lateral view represents the definitive projection for detecting occult joint injury. The patient remains supine on the trauma stretcher with the affected limb extended or flexed slightly (up to , patient tolerance permitting). An image receptor is oriented vertically along the medial side of the knee parallel to the limb, and the central ray is directed horizontally from lateral to medial, perpendicular to the long axis of the femur. Directing the x-ray beam parallel to fluid interfaces enables visualization of lipohemarthrosis, pathognomonic of an intra-articular fracture involving the distal femur or tibial plateau. Disruption of subchondral trabecular bone releases liquid marrow fat and blood into the synovial cavity. Because lipid is less dense than blood, the fat floats to the non-dependent surface, establishing a horizontal fat-fluid level. On the horizontal beam lateral film, the superior non-dependent layer appears radiolucent (fat), while the inferior dependent layer demonstrates uniform radio-opacity (blood).
Specialized Radiographic Projections of the Knee
Beyond basic AP and lateral projections, specific specialized views are deployed to interrogate occult intra-articular structures, complex joint mechanics, and collateral stability.
The intercondylar tunnel projection (Holmblad view or racing start view) is dedicated to imaging the intercondylar notch, the tibial spines, and the posterior articular surfaces of the femoral condyles. It is executed with the patient either prone on the table with the knee flexed and the ankle supported, or in a kneeling racing start posture. In the kneeling position, the patient leans forward over the table such that the femoral shaft of the affected knee forms an angle of relative to the vertical central ray, with the unaffected limb placed forward to support torso weight. Alternatively, an AP axial projection (Camp-Coventry method) can be obtained in patients unable to assume the kneeling posture. The tunnel view projects the tibial spines and intercondylar notch free of femoral condylar superimposition, making it the superior projection for identifying intra-articular loose bodies, notch stenosis, tibial spine avulsion fractures, and subchondral osteochondritis dissecans (OCD) lesions.
The Rosenberg view is a standard component of the dedicated radiographic series for osteoarthritis (alongside weight-bearing AP, weight-bearing lateral, and skyline views). It is acquired as a posteroanterior (PA) weight-bearing view with both knees flexed to and the patellae contacting the vertical Bucky, utilizing a caudad tube angulation. By loading the joint in functional flexion, the Rosenberg view interrogates the posterior weight-bearing zone of the femoral condyles, uncovering severe cartilage loss, joint space collapse, subchondral sclerosis, and marginal osteophytes that project entirely normal on conventional full-extension AP views.
Stress radiographs include manual or mechanically applied varus and valgus stress views. By exerting a standardized medial or lateral opening force across the joint during exposure, these views assess collateral ligament rupture and quantify pathological widening of the medial or lateral tibiofemoral compartments, as well as dynamic femorotibial subluxation.
The medial oblique view (internal oblique projection) is the single dedicated radiographic view capable of profiling the proximal tibiofibular articulation free of bony superimposition. The limb is internally rotated , clearing the fibular head from the posterolateral tibial cortex. The lateral oblique view (external oblique projection) projects the limb in of external rotation; while it profiles the lateral tibial plateau and medial femoral condyle, it is rarely utilized in routine clinical practice.
Tangential Radiography: The Skyline Projection and Patellofemoral Mechanics
The tangential projection of the patellofemoral joint, variously termed the skyline, sunrise, or axial patellar view, provides an unhindered cross-sectional profile of the patellofemoral articulation. The patient is placed prone with the knee maximally flexed. If maximal flexion is restricted by pain or body habitus, the limb is flexed to the patient's limit and the x-ray tube is angled such that an exact angle is maintained between the lower leg and the central ray. The central beam enters tangentially through the patellofemoral joint space.
The skyline view visualizes the anterior surface, internal body, and posterior articular facets of the patella, alongside the opposing medial and lateral femoral condyles and the intervening trochlear groove. In the peripheral field, the fibular head and proximal tibiofibular joint are projected. The patellar articular surface is split by the vertical median patellar ridge into a broad lateral facet and a smaller medial facet. The lateral facet possesses the thickest subchondral bone plate and the widest articular cartilage surface. The medial facet is shorter and more vertically oriented. Along the superior-most medial boundary of the medial facet lies the odd facet, covered by its own distinct hyaline articular cartilage layer. Under normal mechanical conditions, the patella is congruent with the distal femur: the median patellar ridge rests centrally within the deepest point of the trochlear groove.
The skyline view is indicated for assessing patellar subluxation or dislocation, diagnosing trochlear dysplasia, detecting osteochondral fractures of the patellar facets following acute dislocation, evaluating patellofemoral osteoarthritis, and identifying chondromalacia patellae. Unlike the tibiofemoral joint (which has an absolute normal space of ), the patellofemoral joint space is quantified as a proportional ratio to account for patient magnification. The articular space at the patellar apex () is divided by the articular space along the lateral facet ():
Under normal physiological conditions, this ratio is less than or equal to one (ratio ). A ratio exceeding one indicates narrowing of the lateral patellofemoral compartment, reflecting articular cartilage loss.
Objective Radiographic Indices of Patellar Height and Axial Alignment
Axial alignment of the lower extremity on the AP view is defined by four reference lines: the femoral shaft line (drawn along the anatomical mid-diaphyseal axis of the femur), the tibial shaft line (drawn along the mid-diaphyseal axis of the tibia), the femoral condyle line (drawn tangent to the distal-most convex articular margins of the femoral condyles), and the tibial plateau line (drawn across the subchondral margins of the medial and lateral tibial plateaus). The intersection of the femoral shaft line and femoral condyle line forms the femoral angle, while the intersection of the tibial shaft line and tibial plateau line defines the tibial angle. These angles demonstrate characteristic deviations in post-traumatic malunion and congenital varus or valgus deformities.
Patellar height (the vertical position of the patella relative to the tibia) is measured on lateral radiographs flexed between . The standard and most widely utilized metric is the Insall-Salvati index. This index calculates the ratio between the greatest diagonal length of the patella () and the length of the patellar tendon ():
The patellar length () is measured from the superior-most posterosuperior cortical corner to the inferior apical tip. The patellar tendon length () is measured from the inferior apex of the patella down to its insertion point on the tibial tuberosity. On plain radiographs, the normal range of the Insall-Salvati index is (representing a normal variability of approximately ). A ratio less than denotes patella alta (an abnormally high-riding patella, associated with patellar instability, recurrent dislocation, and trochlear dysplasia). A ratio greater than indicates patella baja or patella profunda (an abnormally low-riding patella, associated with quadriceps tendon rupture, joint stiffness, and patellofemoral arthrosis).
Two alternative indices of patellar height exist for specific anatomical variants. The modified Insall-Salvati index was developed to eliminate errors stemming from an elongated, non-articular patellar apex. In this method, the numerator represents the length of the true patellar articular cartilage facet, while the denominator represents the distance from the inferior margin of the articular facet down to the anterosuperior cortical border of the tibia. The normal range for the modified Insall-Salvati index is approximately , with values exceeding indicating patella alta and values below indicating patella baja.
The Blackburne-Peel index measures the vertical distance from the inferior articular margin of the patella perpendicular to a horizontal baseline projected along the tibial plateau, divided by the total length of the patellar articular surface. A Blackburne-Peel ratio exceeding confirms patella alta.
Quantitative Patellofemoral Metrics: Tilt, Sulcus Angle, and Trochlear Dysplasia
Objective evaluation of patellar alignment and trochlear morphology is performed on skyline and true lateral radiographs using validated geometric measurements.
The congruence angle of Merchant objectively quantifies mediolateral patellar tracking and subluxation on the skyline view. To determine this angle, several reference points are marked: the deepest sulcus point of the femoral trochlear groove is designated as point , the highest crest of the medial femoral condyle as point , the highest crest of the lateral femoral condyle as point , and the lowest apex of the median patellar ridge as point . The sulcus angle (angle ) is formed by the intersection of line and line . A zero-reference line () is constructed to bisect the sulcus angle. Next, the patellofemoral line () is drawn connecting the sulcus apex to the patellar ridge . The congruence angle (angle ) is the angle subtended between the bisector line and the patellofemoral line .
By mathematical convention, if line falls medial to the reference bisector , the angle is assigned a negative () value. If line falls lateral to the reference bisector , the angle is assigned a positive () value. The normal mean congruence angle is . An angle deviating laterally by more than is abnormal, diagnostic of pathological lateral patellar subluxation.
Axial linear patellar displacement measures displacement on the skyline view by dropping perpendicular offsets from the deepest point of the trochlear groove and the median patellar ridge to a baseline connecting the condylar summits. A linear lateral displacement greater than indicates abnormal lateralization of the patella.
Patellar tilt describes abnormal rotation of the patella around its longitudinal axis in the horizontal plane. It is evaluated via two distinct methods on skyline views:
The lateral patellofemoral angle of Laurin is formed by the intersection of a line connecting the anterior summits of the medial and lateral femoral condyles and a line drawn tangent across the subchondral bone of the lateral patellar facet. In a structurally normal knee, this angle is acute and opens laterally. If the lines are parallel (angle equals zero / opens to infinity) or if the angle opens medially, it indicates abnormal lateral patellar tilt.
The patellar tilt angle of Grelsamer provides a more reproducible and reliable measurement of patellar tilt because it is entirely independent of condylar height, condylar hypoplasia, and patellar facet asymmetry (Wiberg variations). It is measured as the angle between a transverse line spanning the absolute medial and lateral cortical edges of the patella and a true horizontal reference line. The normal angle is . A patellar tilt angle exceeding is abnormal, confirming isolated lateral patellar tilt.
Trochlear morphology is evaluated through the sulcus angle and lateral cortical signs. The sulcus angle is formed by the lines joining the deepest point of the trochlear groove to the highest points of the medial and lateral femoral condyles on the skyline view. A normal sulcus angle measures less than or equal to (). An angle greater than indicates a flat, dysplastic trochlear groove.
On a strictly positioned true lateral radiograph of the distal femur, trochlear dysplasia is diagnosed by the crossing sign and the supratrochlear bump. In a normal femur, the line tracing the floor of the trochlear groove remains entirely posterior to the line representing the anterior cortex of the distal femoral shaft. The crossing sign occurs when the radiopaque line representing the floor of the trochlear groove crosses anterior to the anterior femoral cortical line, confirming that the trochlea is shallow or convex. A supratrochlear bump represents a prominent, abnormal anterior bony projection of the proximal trochlear articular floor exceeding beyond the anterior femoral cortex line, a key radiographic hallmark of high-grade Dejour trochlear dysplasia.
Accessory Ossicles of the Knee Joint
Three primary accessory sesamoid ossicles and calcifications occur around the knee joint: the fabella, the cyamella, and meniscal ossicles.
The fabella is a common, normal accessory sesamoid bone embedded within the proximal muscular tendon of the lateral head of the gastrocnemius muscle (and exceptionally rarely within the medial head). It is present in approximately of the general population. On lateral radiographs, the fabella appears as a smooth, oval, densely corticated ossicle situated posterosuperior to the lateral femoral condyle, outside the true joint capsule and distinctly posterior to the tibiofemoral joint space.
The cyamella is a rare accessory sesamoid bone located within the tendon of the popliteus muscle. It is situated along the lateral aspect of the distal femur within or immediately adjacent to the popliteal groove. Due to its lateral position, it is profiled most clearly on anteroposterior (AP) radiographs.
Meniscal ossicles are focal, well-corticated ossifications situated within the substance of the meniscus, occurring with highest frequency within the posterior horn of the medial meniscus. Meniscal ossicles typically develop secondary to a previous meniscal root or radial tear, or chronic local trauma. Unlike intra-articular osteochondral fracture fragments, meniscal ossicles demonstrate entirely smooth, rounded, well-corticated borders and lack an adjacent osseous donor defect on the opposing femoral condyle or tibial plateau. Anatomically, a meniscal ossicle is located directly inside the tibiofemoral joint space, clearly differentiating it from the fabella, which lies entirely posterior to the joint space within the gastrocnemius muscle.
Dialogue and Diagnostic Clarifications
During technical radiological assessment, several practical questions arise regarding imaging mechanics, anatomical variations, and differential diagnoses:
Regarding the visualization of ligamentous anatomy on plain films: Ligamentous structures, including the cruciate and collateral ligaments, are fibrous soft tissues and cannot be visualized directly on plain radiographs. Radiographic analysis of these structures relies entirely on indirect osseous landmarks, including cortical grooves, epicondylar attachment sites, avulsion fragments, and alignment changes. Direct visualization and pathological characterization of ligamentous tears is reserved for magnetic resonance imaging (MRI).
Regarding the precise anatomical positioning of the femoral trochlea: The trochlea is not located between two separate projecting bones, but represents a smooth, concave depression located centrally on the anterior surface of the distal femur, interposed between the anterior convex expanses of the medial and lateral femoral condyles, functioning specifically to articulate with the patella.
Regarding the acquisition of non-weight-bearing AP radiographs: Non-weight-bearing AP views are performed with the patient resting in a relaxed supine position on the x-ray table with the knee in full extension. Performing a non-weight-bearing projection in an upright standing position by attempting to offload weight onto the contralateral limb is non-standard, introduces unstable rotational motion artifacts, and fails to replace the standardized supine technique.
Regarding the clinical significance of the patellar odd facet: The presence of a prominent odd facet on the superomedial patellar margin alters normal load distribution across the patellofemoral joint. Patients possessing this anatomical variant are prone to early-onset patellofemoral chondromalacia and premature degenerative osteoarthritis.
Regarding the radiographic differentiation between a bipartite patella and an acute patellar fracture: In acute fractures, the fragments exhibit sharp, jagged, non-corticated edges, and the combined volume of the fragments precisely matches the expected anatomical volume of an intact patella (). In a bipartite patella, the accessory center features a completely smooth, continuous, dense sclerotic cortical rim, and the combined volume of the main body and the ossicle exceeds the normal expected patellar volume (). While plain radiography enables subjective differentiation through visual inspection of cortical margins, absolute volumetric quantification requires three-dimensional computed tomography ().
Regarding the differential diagnosis between a fabella and a meniscal ossicle: The distinction depends on anatomical compartmentalization. A meniscal ossicle resides directly within the horizontal plane of the tibiofemoral joint space, situated within the meniscus itself (most commonly the posterior horn of the medial meniscus). The fabella is an extracapsular sesamoid bone situated well outside the knee joint space, localized within the soft-tissue muscular shadow of the lateral gastrocnemius head on the posterior aspect of the distal femur.