Crime Scene Marking and Mapping, Part II

Crime Scene Evidence Marking and Mapping

Baseline Coordinates Method

  • Overview:

    • Similar to rectangular coordinates method.

    • Best suited for exterior scenes without obvious landmarks but can also be used inside.

    • Involves a datum point which acts as a reference for measurements.

Datum Point
  • Definition: A specific location from which the baseline coordinates extend.

  • Establishment:

    • In an exterior scene, established by triangulating to nearby landmarks like corners of buildings.

    • If no landmarks are available, natural features like trees or rocks can be utilized by noting the exact locations for measurements.

  • Technique:

    • Metal stakes should be set at the base of any chosen landmark (tree, rock, etc.).

    • Measure distance from two landmarks to establish the datum.

Extending Baseline
  • Process:

    • Extend the baseline in a cardinal direction (north, south, east, or west).

    • Recommended to use a non-stretching tape measure for accurate distance measurement; string can be used if necessary but requires additional effort to stretch a secondary measuring tape.

    • Ensure that the baseline is a perfectly straight line; do not rely on naturally occurring lines like curbs or sidewalks, as they may not be straight.

Measurement Technique
  • Distance Recording:

    • Measure from the evidence (either center of mass or identified points) to the baseline at a right angle (90 degrees).

  • Recorded Data:

    • Two measurements are recorded:

    • Distance from the baseline (perpendicular distance).

    • Distance along the baseline from the datum point to where evidence measurement crosses the baseline.

  • Measurement Tools:

    • Employ a non-stretching fabric tape measure for optimal accuracy.

    • If using string as the baseline, a secondary tape measure must be used to measure from the transect point back to the datum, which may introduce error.

Precision Techniques
  • Employ infrared or laser measuring devices for effective measurements, ensuring correct placement of the tape measure against the baseline.

Polar Coordinate Method

  • Application:

    • Older technique mainly useful for mapping exterior scenes with widely scattered evidence like large crime scenes or aircraft crashes.

    • Unsuitable for locations with obstructed sight lines (e.g., heavy woods).

Measurement Components
  1. Horizontal Angle:

    • Rotation from north in the horizontal plane (measured in degrees, 0°-360°).

  2. Horizontal Distance:

    • Straight-line distance from the datum point to the evidence item.

    • Must remain true horizontal distance when elevation is recorded.

  3. Elevation:

    • Measured in the context of using a surveyor’s transit or laser sighting device.

    • Difference in height between a benchmark (datum elevation) and the evidence.

Triangulation and Rectangular Coordinates

  • Utility:

    • More complex than polar coordinates but necessary for accurate mapping in some cases, especially for extensive crime scenes or excavations like gravesites.

Grid System Creation
  • Setup Procedure:

    • Establish the grid using stakes as triangulation landmarks.

    • Use methods similar to standard Cartesian coordinates; assign zero-zero to the datum point at the lower left corner of the grid.

  • Grid Size Determination:

    • Stake placements are predetermined, e.g., each stake might be set 10 feet apart.

  • Verification:

    • Ensure the grid is square using the three-four-five rule for practical right angles.

Measurements in Grids
  • The rectangular coordinates method offers increased precision in localized areas such as grave sites.

  • Identifying Evidence:

    • Each intersection on the grid represents a sub-datum point aiding in precise location documentation.

    • Record evidence locations using the combination of grid identification and rectangular positions (e.g., grid 5-5).

Incorporation of Technology

  • Total Station Systems:

    • Automated surveying systems utilising electronic transits and lasers that provide enhanced accuracy over manual methods.

  • Measurement Precision:

    • Total stations measure distances with great precision (angular measurements to within 0.0013888 degrees, distance to a few millimeters).

    • Do not require alignment with magnetic north for accuracy.

Functionality and Limitations
  • Capable of effectively capturing extensive scenes quickly, useful in accident investigations and homicide cases.

  • Costs and Training Requirements:

    • Costs range from $6,000 to $12,000 and require significant training for proper utilization.

Three-Dimensional Laser Scanning Systems

  • Definition and Functionality:

    • Automated systems that send out laser pulses and capture numerous data points, creating a complete point cloud of the scene.

  • Measurement Techniques:

    • Employ both line-of-sight and phase shift measurements for determining distances.

    • Capable of over 900,000 measurements per minute, significantly increasing efficiency.

Benefits and Applications
  • Generates panoramic images correlated with physical points in the point cloud, allowing detailed scene documentation.

  • Suitable for isolated scenes with minimal landmarks through geo-referencing capabilities.

Operational Considerations
  • Positioning to avoid blind spots is crucial, with numerous scanning positions often required for comprehensive coverage.

  • Real-time data assessment is facilitated, enabling the revisit of evidence or assessment of previously overlooked aspects post-scanning.

Conclusion

  • The integration of digital technologies in crime scene mapping represents a marked enhancement over traditional methods. These advancements are expected to continue shaping the future of forensic investigations, presenting new capabilities for accurate evidence documentation and analysis.