Study Notes on Mechanical Wave Propagation, Delay, and Diffraction

Progressive Mechanical Waves and Temporal Delay

  • Principle of Wave Propagation from a Source:

    • A progressive mechanical wave propagating along a medium transfers a disturbance from the source SS to any given point MM located downstream.
    • Every point MM in the propagation medium reproduces the motion of the source SS with a specific time delay, denoted by τ\tau.
  • Formulation of the Elongation Function:

    • The general expression relating the vertical elongation yM(t)y_M(t) of point MM at time tt to the elongation ySy_S of the source SS is given by:     yM(t)=yS(t−τ)y_M(t) = y_S(t - \tau)
    • The temporal delay τ\tau represents the duration required for the wave front to travel the distance SMSM separating the source from point MM at a celerity (propagation speed) vv:     τ=SMv\tau = \frac{SM}{v}
    • Substituting the expression of τ\tau directly into the wave equation yields:     yM(t)=yS(t−SMv)y_M(t) = y_S\left(t - \frac{SM}{v}\right)

Condition and Velocity Analysis for Wave Diffraction

  • Physical Criterion for Diffraction:

    • When a progressive wave encounters an aperture or obstacle of width aa, the wave undergoes the phenomenon of diffraction if the opening dimension is smaller than or of the same order of magnitude as the wavelength λ\lambda:     a≤λa \le \lambda
    • In this analysis, the geometric opening is specified as:     a=20 ma = 20\,\text{m}
  • Wave Celerity in Shallow Water:

    • For gravity water waves propagating in shallow water of depth HH, the propagation speed v1v_1 depends on the local acceleration due to gravity gg and the depth HH according to the relation:     v1=(g×H)1/2v_1 = (g \times H)^{1/2}
    • The propagation speed is also fundamentally related to the spatial period (wavelength λ1\lambda_1) and temporal frequency NN via:     v1=λ1×Nv_1 = \lambda_1 \times N
  • Determination of the Incident Wavelength:

    • Equating both formulations for wave celerity:     λ1×N=(g×H)1/2\lambda_1 \times N = (g \times H)^{1/2}
    • Solving explicitly for the incident wavelength λ1\lambda_1:     λ1=(g×H)1/2N\lambda_1 = \frac{(g \times H)^{1/2}}{N}
    • Given experimental and physical parameters:
    • Acceleration due to gravity: g=9.8 m/s2g = 9.8\,\text{m/s}^2
    • Water depth: H=15 mH = 15\,\text{m}
    • Wave frequency: N=0.35 HzN = 0.35\,\text{Hz}
    • Evaluating numerically:     λ1=(9.8×15)1/20.35\lambda_1 = \frac{(9.8 \times 15)^{1/2}}{0.35}λ1=34.64 m\lambda_1 = 34.64\,\text{m}
  • Evaluation of the Diffraction Condition:

    • Comparing the aperture size to the calculated wavelength:     a=20 ma = 20\,\text{m}λ1=34.64 m\lambda_1 = 34.64\,\text{m}
    • Because a<λ1a < \lambda_1, the condition for diffraction is fully satisfied.
    • Consequently, the wave undergoes the phenomenon of diffraction upon crossing the aperture.

Conservation of Physical Properties During Diffraction

  • Invariance of Fundamental Wave Characteristics:

    • Diffraction is a geometric dispersion phenomenon that modifies the directional propagation profile and wavefront shape of an incoming wave without altering the medium of propagation.
    • The incident wave and the diffracted wave share identical physical characteristics, maintaining the exact same frequency NN, celerity vv, and wavelength λ\lambda.
  • Diffracted Wavelength Value:

    • Due to the equality of properties between the incident and diffracted waves:     λdiffracted=λ1\lambda_{\text{diffracted}} = \lambda_1
    • Hence, the wavelength of the wave exiting the aperture is:     λdiffracted=34.64 m\lambda_{\text{diffracted}} = 34.64\,\text{m}

Angular Divergence of the Diffracted Wave

  • Geometric Formula for the Diffraction Angle:

    • The angular width (aperture angle) α\alpha characterizing the spread of the diffracted wave pattern across the opening is determined by the ratio of wavelength to slit width:     α=2×λa\alpha = 2 \times \frac{\lambda}{a}
  • Numerical Evaluation of Angular Spread:

    • Substituting the obtained wavelength λ=34.64 m\lambda = 34.64\,\text{m} and the slit dimension a=20 ma = 20\,\text{m}:     α=2×34.6420\alpha = 2 \times \frac{34.64}{20}
    • Computing the final value gives the angular spread in radians:     α=3.464 rad\alpha = 3.464\,\text{rad}

Contextual Exam Reference

  • Examination Cohort and Motto:
    • Designated academic level: BAC 2027.
    • Motivational motto: "YES WE CAN!".