Untitled
Methods of Drivage of Box Cut
Overview of Box Cut
- Definition: A box cut is the initial excavation made to access a mineral deposit in surface mining, serving as the entry point for further mining operations by removing overburden and exposing the ore or coal seam.
- Importance: Essential in strip mining, open-pit mining, and contour mining, especially when mining begins in an area with no previous excavation.
- Considerations for Method Choice:
- Geological conditions
- Deposit depth
- Overburden thickness
- Economic feasibility
Factors Influencing Drivage Method Choice
- Cross Section, Width, and Gradient of the Box Cut
- Local Topography
- Availability of Dumping Space
- Type and Working Dimensions of Excavating Machine
- Desired Production Levels
Methods of Drivage of Box Cut
1. Sidecasting without Transport of Overburden
- Suitable Equipment: Dragline excavators.
- Advantage: Ideal for making a box cut due to their deeper and wider reach.
- Mechanism:
- The earth and rocks are removed and dumped aside at a safe distance above ground.
2. Drivage of Box Cut by Shovel and Dumper
- Equipment Used: Power shovels and dumpers.
- Loading Process:
- Power shovels load material directly from the box cut floor onto dumpers on the surface but have limited horizontal range for side casting.
- Depth Consideration:
- Loading by power shovels is dependent on the maximum dumping height of the shovel; efforts can only continue to a certain depth.
- For deeper excavation:
- The floor of the box cut is leveled off at a certain horizon.
- A road is extended down to the next level and further deepening occurs.
- Completion:
- Once the required bench depth is reached, the box cut is leveled and the track/road extended to the bottom, breaking the ledge at the intermediate level B2.
3. Conventional Excavation Method
- Process:
- Uses heavy earthmoving equipment: bulldozers, scrapers, front-end loaders to remove overburden.
- Suitable for shallow deposits with manageable overburden thickness.
- Advantages:
- Cost-effective for small-scale or shallow mining.
- Requires minimal specialized machinery.
- Faster execution in soft ground conditions.
- Disadvantages:
- Limited efficiency for deep deposits with thick overburden.
- Not suitable for hard rock conditions without prior blasting.
4. Drill and Blast Method
- Process:
- Drilling holes into the overburden or hard rock, inserting explosives for controlled blasting.
- Excavators or haul trucks transport the blasted material afterward.
- Advantages:
- Effective in hard rock conditions.
- Efficient for deep deposits.
- Improved control over bench design and slope stability.
- Disadvantages:
- Higher operational costs compared to direct excavation.
- Requires strict safety measures.
- Potential vibration and noise issues near populated areas.
5. Dragline Method
- Process:
- Draglines remove overburden in large sections using a long boom and bucket.
- The bucket is dropped and dragged across the overburden before being lifted to dump areas.
- Advantages:
- Efficient for large volumes of overburden.
- Suitable for moderate deep and wide box cuts on flat terrain.
- Reduces operational costs in large-scale mining.
- Disadvantages:
- High initial investment for dragline equipment.
- Requires skilled operators.
- Less effective in hard rock without blasting.
6. Bucket Wheel Excavator (BWE) Method
- Process:
- Uses a continuous digging mechanism with rotating buckets on a large wheel to excavate.
- Advantages:
- Higher productivity from continuous operation.
- Suitable for large-scale operations, reducing energy consumption.
- Disadvantages:
- Limited to soft, unconsolidated materials.
- High capital and maintenance costs.
- Requires significant infrastructure (e.g., conveyor belts).
7. Contour Box Cut Method
- Process:
- Used in hilly terrains, following the natural contour to minimize excessive overburden removal.
- Often combined with other mining techniques like auger mining.
- Advantages:
- Minimizes excavation costs and overburden handling.
- Less environmental disturbance compared to typical strip mining.
- Disadvantages:
- Limited applicability in flat or deep deposits.
- Potential for steep highwalls, increasing slope failure risks.
Factors Affecting Box Cut Method Choice
- Deposit Depth & Overburden Thickness: Deeper deposits favor drill and blast or dragline methods; shallow deposits may use conventional excavation.
- Geological Conditions: Hard rock favors blasting; soft deposits are suitable for bucket wheel excavators.
- Mine Scale & Production Requirements: Large-scale mining prefers efficient methods like draglines or BWEs.
- Economic Considerations: Some methods may have higher costs due to the nature of the deposit.
- Environmental Impact & Safety: Methods like contour mining require careful management of waste, dust, and noise controls.
Unit Operations in Surface Mining Development
- Definition: Sequential processes and core activities used for mineral extraction, emphasizing resource recovery while minimizing environmental impact.
Key Unit Operations
Drilling:
- Creating boreholes for explosives.
- Parameters include pattern, diameter, burden, and spacing for optimized fragmentation.
Blasting:
- Loading explosives into boreholes and detonating them to facilitate material movement.
Loading:
- Transporting broken material using excavators, shovels, or loaders.
- Impacts on cycle times and productivity.
Hauling:
- Moving loaded material away from the pit using trucks, conveyors, or rail systems.
Supporting Development Operations
Overburden Removal:
- Stripping non-valuable material to expose ore bodies.
Topsoil Stockpiling and Waste Dumps:
- Ensuring environmental management through preservation.
Mine Planning and Layout:
- Preparing the pit design, access roads, and scheduling operations.
Sequence of Surface Mining Development
- Prospecting, Exploration & Planning: Geological surveys, drilling, environmental assessment.
- Overburden Stripping: Removing waste material to expose or bodies.
- Drilling & Blasting: Creating boreholes, explosive placement, rock fragmentation.
- Loading & Hauling: Transporting minerals or waste from the pit to processing sites or dumps.
- Ore Processing: Initial recovery of minerals, sometimes on-site.
- Rehabilitation: Progressive reclamation of land affected by mining.
Summary
- Each unit operation in surface mining is vital for safe, efficient, and sustainable mineral extraction. Modern technology and planning enhance operational accuracy and reduce risks at every stage. Successful mining requires strategic integration of various operations crucial to resource utilization and environmental management.