EOT - G10 - ADV - term 2

Page 1: Title and Introduction

  • EOT – G10 ADV INSPIRE PHYSICS 2024-2025

  • Instructor: Ms. Asmaa Alhameed

Page 2: MCQs Overview

  • Multiple Choice Questions for review.

    • Part (1/2)

    • Instructor: Ms. Asmaa Alhameed

Page 3: Ohm's Law and Resistance

Ohm's Law

  • Statement: Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points. Formulated as:

    • AV = IR

  • Where:

    • AV = Potential difference (Voltage)

    • I = Current

    • R = Resistance

Definition of a Resistor

  • A resistor is defined as a device designed to have a specific resistance.

  • SI Unit of Resistance: Ohms (Ω).

Resistance Definition

  • Resistance (R) is defined as:

    • R = AV/I

  • Indicates how much potential difference (AV) is needed to produce a certain current (I).


Page 4: Resistance and Ohm's Law Details

Introduction to Resistance

  • Georgian Ohm studied the current and voltage relationship, leading to Ohm's law.

  • Electrical current varies greatly depending on the material's resistance (e.g., copper rod vs glass rod).

Measurement of Resistance

  • Resistance is measured via Ohm's law:

    • Opposition to current from a potential difference across a conductor.

    • Measured in Ohms.


Page 5: Understanding Resistance More

Unit of Resistance

  • Named after German scientist Georg Ohm.

  • Resistance remains constant across different potential differences for conductors obeying Ohm's law.


Page 6: Example Circuit Problem

Example Problem

  • An automobile lamp with a resistance of 33 Ω is connected to a 12 V battery.

  • Find the current (I):

    • Using Ohm's Law:

    • I = AV/R = 12V/33Ω

    • I ≈ 0.36 A


Page 7: Continuation of Example Problem

Current Calculation Continuation

  • Verify and re-calculate current:

  • Current through the circuit is:

    • I = 0.36 A


Page 8: Sensor Circuit Problem

Sensor Example

  • A sensor operates at 2.0 × 10⁻⁴ A with a 3.0 V battery.

  • Find Resistance (R):

    • R = V/I = 3.0V/2.0*10⁻⁴A

    • Results in 15000 Ω.


Page 9: More on Sensors

Current Through Sensor

  • Given values, calculate resistance then confirm and demonstrate calculations.


Page 10: Motors and Voltages Problem

Circuit Problem with Motors

  • A motor with a resistance of 32Ω is connected to a voltage source. Find voltage (V) when current = 3.8A.

  • Calculation:

    • V = IR = 3.8A * 32Ω = 121.6 V


Page 11: Additional Motor Calculation

Further Motor Questions

  • Analyze voltage source with specific resistance. Further calculations might involve re-checking information with examples in practical circuit applications.


Page 12: Lamp and Power Consumption

Lamp Operation Example

  • A lamp drawing 0.50 A connected to a 120-V source.

  • Find Resistance (R):

    • R = V/I = 120V / 0.5A = 240Ω.


Page 13: Power Consumption Discussion (Example)

Power Calculation

  • Given power w = 75 W with 125 V supply:

  • Calculate I:

    • I = P/V = 75W / 125V = 0.6A

    • Then calculate resistance using, V / I analysis.


Page 14: Challenge Problem on Current Control

Challenge Scenario

  • Resistor addition to change current to half its original value.

    • Calculate necessary added resistance for a particular rate of transformation of energy in radiance.


Page 15: Overview of Circuit Symbols

Circuit Symbols

  • Identify common circuit symbols used in diagrams. Discuss components like resistors, capacitors, and power sources, and their functions in circuits.


Page 16-25: Resistor Properties and Series Circuits

Series and Parallel Connection Principles

  • Explain basic principles of series and parallel resistors, how to calculate equivalent resistance, and their practical usage in electrical systems.


Page 26-35: Magnetism Overview

Properties of Magnets and Induction

  • Discuss properties of magnets, how to convert them into temporary magnets, uses of magnetic fields in electrical devices.


Conclusion

  • Recap important points discussed regarding resistance, Ohm's law, circuit principles, and the physics of magnetic fields.

  • Encourage thorough understanding through practical examples, circuit building or simulation exercises for mastery of concepts.