AQA GCSE Chemistry Revision Notes
AQA GCSE Triple Science Revision Sheets
Chemistry Unit 1
1.1 - Atoms
Key Chemistry Definitions
- Atom: The smallest unit of ordinary matter that forms an element.
- Element: A pure substance with the same type of atom only in its composition (same number of protons each).
- Compound: A substance that contains 2 or more chemically bonded elements.
- Mixture: 2 or more substances that aren't chemically bonded.
The Periodic Table
- Atomic Mass: Protons + Neutrons.
- Atomic Number: Protons (and electrons).
- Groups: Vertical columns in the periodic table.
- Periods: Horizontal rows in the periodic table.
Chemical Symbols of Elements
- N = Nitrogen = Atomic Number 7 = Atomic Mass 14
- Cl = Chlorine = Atomic Number 17 = Atomic Mass 35.5
- Li = Lithium = Atomic Number 3 = Atomic Mass 7
- K = Potassium = Atomic Number 19 = Atomic Mass 39
- C = Carbon = Atomic Number 6 = Atomic Mass 12
Compounds
- Example: H₂O
- Hydrogen (H) = 2 atoms (indicated by subscript 2) + Oxygen (O) = 1 atom.
- Ratio of H:O in H₂O = 2:1.
Key Groups/Periods
- Group 1: The Alkali Metals
- Group 2: The Alkaline Earth Metals.
- Transition Elements: D-block elements.
- Group 7: The Halogens
- Group 8/0: The Noble Gases
1.2 - Chemical Equations
What They Show
- Participating substances in a chemical reaction—Reactants & Products.
- Word equations represent substances in a qualitative manner. Symbol equations show the quantitative ratios of substances.
Example of Chemical Reaction
- Reactants: Hydrogen + Oxygen → Products: Water.
- Symbol Equation: ext{H}_2 + ext{O}_2
ightarrow 2 ext{H}_2 ext{O}.
Conserving Mass
- Law of Conservation of Mass: The mass of products formed is equal to the mass of reactants used.
State Symbols and Balancing
- State Symbols:
- (s) = Solid
- (l) = Liquid
- (g) = Gas
- (aq) = Aqueous (dissolved in water)
1.3 - Separating Mixtures
Key Terms
- Miscible: Two liquids can mix together.
- Immiscible: Two liquids cannot mix together.
- Soluble: A substance will dissolve in a solvent.
- Insoluble: A substance will not dissolve in a solvent.
- Solvent: A liquid that dissolves a substance.
- Solute: A substance dissolved in a liquid.
Methods of Separation
- Filtration: Used to separate insoluble substances from soluble ones by using filter paper and funnels.
- Example: Sand + Salt Solution → Salt (filtrate) & Sand (residue). - Crystallisation: Involves heating a salt solution until solvent evaporates leaving salt crystals behind.
- Simple Distillation: Used to separate a solvent from its solution by evaporating the solvent which is then condensed back into the liquid state.
- Fractional Distillation: Used to separate a mixture of miscible liquids based on their different boiling points.
- Example: Distillating liquid mixtures like ethanol and water. - Paper Chromatography: Used to separate and identify components of a mixture based on their differing solubility in the solvent used.
1.4 - Fractional Distillation and Paper Chromatography
Fractional Distillation
- Separates miscible liquids using their boiling points.
- Example: Water (100°C) & Ethanol (78°C) can be separated based on boiling point.
Paper Chromatography
- Involves drawing a line at the bottom of chromatography paper, adding drops of ink, and placing the paper upright in a solvent. As the solvent moves up, it carries the ink with it, separating the different components based on solubility.
- The more soluble a component, the higher it travels up the paper.
1.5 - History of the Atom
- Democritus (460-370 BC): Proposed that all matter is composed of small, indivisible particles called atoms (ATOMOS).
- John Dalton (1766-1844): Proposed that all atoms of an element are identical in mass and properties; atoms can combine and rearrange but not be created or destroyed.
- J.J. Thompson (1856-1940): Discovered the electron and proposed the Plum Pudding Model where electrons are embedded within a positively charged “pudding”.
- Ernest Rutherford (1871-1937): Performed the gold foil experiment demonstrating that atoms have a small, dense, positively charged nucleus.
- Niels Bohr (1885-1962): Proposed that electrons exist in specific energy levels or shells around the nucleus.
- James Chadwick (1891-1974): Discovered the neutron which accounts for the mass of the atom along with protons.
1.6 - Structure of the Atom
- Proton: Positive charge, relative mass of 1.
- Neutron: No charge, relative mass of 1.
- Electron: Negative charge, relative mass of about 1/2000.
Linking the Model to the Periodic Table
- Atomic Mass: Sum of protons and neutrons.
- Atomic Number: Total protons (and electrons).
- For example, Argon has an atomic number of 18, indicating 18 protons and electrons, and a mass number of 40 indicating 22 neutrons.
1.7 - Ions, Atoms, and Isotopes
Atoms vs. Ions
- An atom has no overall charge; the number of protons equals the number of electrons.
- Ions are electrically charged due to loss or gain of electrons.
- Example: If an oxygen atom gains two electrons, it becomes an oxide ion (O²⁻).
Isotopes
- Atoms of the same element with different numbers of neutrons. They have the same chemical properties due to the same electronic configuration but different physical properties like mass.
- Example: Hydrogen-1 (1H), Hydrogen-2 (2H), Hydrogen-3 (3H).
1.8 - Electronic Structures
Electron Shells
- Electrons occupy shells or energy levels around the nucleus, with the first shell holding two electrons, the second holding eight, and similar fillings for subsequent shells.
- Electronic structure: For example, Beryllium has an electronic structure of 2, 2.
Periodic Table Relationships
- Group number corresponds to the number of electrons in the outermost shell, while the period number corresponds to the number of energy levels.
Chemistry Unit 2
2.1 - Development of the Periodic Table
- John Dalton: Organized elements by atomic weight in 1808.
- John Newlands: Noticed similarities between every 8th element (1864) and proposed the 'Law of Octaves'.
- Dmitri Mendeleev: Created a periodic table in 1869 that ordered elements by atomic weight and properties, left gaps for undiscovered elements and predicted their properties accurately.
- Modern Periodic Table: Ordered by increasing atomic number, addressing earlier anomalies.
2.2 - Electronic Structures and the Periodic Table
- Groups: Have similar chemical properties due to similar electronic configurations; the group number indicates valence electrons in the highest energy level.
- Non-Metals: Found on the top right, will gain electrons.
- Metals: Located on the left and center, tend to lose electrons.
- Noble Gases: Full outer electron shell, making them stable and unreactive, exist as mono-atomic gases.
Overview of Group 1
- Very reactive, low density, soft metals with one electron in their outermost shell. Increased reactivity down the group (Li, Na, K, Rb, Cs, Fr).
- Form ionic compounds with non-metals.
- Reactions increase in vigor down the group. For example:
- Lithium + Water → Lithium Hydroxide + Hydrogen.
2.4 - Group 7: The Halogens
Overview of Group 7
- Very reactive non-metals with seven electrons in their outermost shell. Include Halogens (F, Cl, Br, I, At).
Properties of Halogens
- Exist as diatomic molecules and typically form ionic compounds with alkali metals.
- Example: Chlorine + Sodium → Sodium Chloride.
2.5 - Explaining Trends
Reactivity in Groups 1 & 7
- Group 1: Reactivity increases down the group due to larger atoms losing valence electrons more easily.
- Group 7: Reactivity decreases down the group as larger atoms gain electrons less effectively.
2.6 - The Transition Elements
Physical Properties
- Good conductors of heat and electricity, hard, strong, high melting points.
Chemical Properties
- Form coloured compounds, ions with multiple charges, and are often used as catalysts in reactions.
Chemistry Unit 3
3.1 - States of Matter
Particle Theory
- Explains states of matter based on particle movement and average distance.
- Solids: Fixed positions, regular arrangement.
- Liquids: Random arrangement, constantly changing.
- Gases: High speed with lots of space, random arrangement.
Changes of State
- Melting, boiling, condensing involve energy breaking bonds rather than raising temperature.
3.2 - Atoms into Ions
Electron Transfer
- Involves ionic bonding: transfer of electrons that yields positively charged atoms (metals) and negatively charged ions (non-metals).
Example of Ionic Bonding
- Sodium loses an electron, forming extNa+; Chlorine gains an electron forming extCl− leading to the formation of Sodium Chloride (extNaCl).
3.3 - Ionic Bonding
Introduction to Ionic Bonds
- Formed between metals and non-metals through the electrostatic attraction of oppositely charged ions.
3.4 - Giant Ionic Structures
Characteristics of Ionic Compounds
- High melting and boiling points due to strong ionic bonds. Conductivity varies based on physical state: they do not conduct electricity as solids but do conduct when molten or in solution.
3.5 - Covalent Bonding
Introduction to Covalent Bonds
- Atoms share electrons to achieve a full outer shell, resulting in molecules.
3.6 - Structure of Simple Molecules
Models of Molecules
- 3D models, 2D models, displayed formulas, and dot-cross diagrams represent molecular structures.
3.7 - Giant Covalent Structures
Allotropes of Carbon
- Carbon can participate in different forms (allotropes): Diamond, Graphite, Graphene, Fullerenes, and Nanotubes, each with distinct properties and structures.
3.8 - Fullerenes and Graphene
- Fullerenes: Structures where carbon atoms form shapes like tubes or spheres.
- Graphene: A single layer of carbon atoms arranged in hexagonal patterns, notable for its strength and electrical conductivity.
- Regular layers of atoms forming a metallic lattice with a "sea" of delocalised electrons. These factors account for metals’ conductivity.
- Malleable, ductile, and exhibit high melting points due to the strong bonding of metallic structures. Alloys may have different physical properties.
3.11 - Nanoparticles
Size and Properties of Nanoparticles
- A nanoparticle is between 1-100 nm in size, causing varied chemical and physical properties.
Applications of Nanoparticles
- Nanoparticles are used in various fields such as medicine, electronics, and environmental science. However, risks in human health and the environment warrant consideration.
3.12 - Applications of Nanoparticles
Future Developments and Risks
- Potential applications in medical technology and electronics, but possible adverse effects on health and environment must be monitored.
Chemistry Unit 4
Definitions
- Relative Atomic Mass (Ar): The average mass of an atom of an isotope relative to 1/12th of Carbon-12.
- Relative Formula Mass (Mr): The sum of the Ar values for all atoms in a formula.
4.2 - The Mole and Avogadro's Constant
- Avogadro's Constant: 6.02imes1023 particles in 1 mole of a substance.
4.3 - Reacting Masses
Steps for Reacting Mass Calculations
- Balance the chemical equation.
- Determine moles and molar ratios.
- Calculate mass.
4.4 - Limiting Reactants
- The limiting reactant is the substance that is entirely consumed in a reaction, limiting the amount of product formed.
4.5 - Yields
Definitions
- Yield: Amount of product formed.
- Theoretical Yield: Expected product amount based on calculations.
- Actual Yield: Amount obtained from the reaction.
- Percentage Yield: ext(ActualYield/TheoreticalYield)imes100.
4.6 - Atom Economy
- Atom Economy: A measure of the amount of reactants that become useful products during a reaction, calculated as ext(MassofUsefulProducts/TotalMassofProducts)imes100.
4.7 - Concentration of Solutions
Definitions
- Concentration: Amount of solute per unit volume of solvent, typically expressed in grams per dm³ or mol per dm³.
4.8 - Titrations
- Used to determine the concentration of a solution by reacting it with a solution of known concentration.
4.9 - Gas Calculations
Gas Volume Calculations
- Volume of gas at standard condition: extVolume(dm3)=Molesimes24.
Chemistry Unit 5
5.1 - The Reactivity Series
Properties of Reactivity
- Reactivity compares how likely substances are to react with others based on their position in the reactivity series.
5.2 - Displacement Reactions
- Describes a reaction where a more reactive element displaces a less reactive one from its compound.
Overview
- Extraction methods depend on the metal's reactivity and economics of extraction.
- Unreactive metals can be found in their native state, while more active ones need processes like reduction with carbon or electrolysis.
- A general reaction involves a metal reacting with an acid to form a metal salt and hydrogen.
5.5 - Salts from Insoluble Bases
Neutralization Reactions
- Neutrals are formed from reactions between acids and bases, generating salts and water.
5.6 - Making More Salts
Common Salt Reactions
- Common reactions involving acids and bases result in the formation of salts, including those involving carbonates.
5.7 - Neutralisation and the pH Scale
Understanding Acids and Bases
- Acids yield H+ ions in solution, while bases yield OH- ions. Neutralization creates salt and water with a resultant pH shift.
5.8 - Strong and Weak Acids
- Strong acids ionize completely in solution, while weak acids only partially ionize, affecting concentration and reactivity differences.
Chemistry Unit 6
6.1 - Introduction to Electrolysis
- Electrolysis uses electricity to decompose ionic compounds (electrolytes).
6.2 - Changes at the Electrode
Oxidation and Reduction Processes
- Oxidation (loss of electrons) occurs at the anode while reduction (gain of electrons) happens at the cathode.
Process of Electrolysis in Aluminium Production
- Aluminium oxide extracted from bauxite is electrolyzed to obtain pure aluminum.
6.4 - Electrolysis of Aqueous Solutions
- When electrolyzing brine, leading to the production of chlorine gas, hydrogen gas, and sodium hydroxide. They are obtained at respective electrodes based on their reactivity.