Orthotics Summary

Orthotics Overview

  • Orthotics (Greek: Ορθός, romanized: ortho, lit. 'to straighten, to align') is a medical specialty focused on orthoses design and application.
  • Orthoses are externally applied devices influencing neuromuscular and skeletal systems.
  • Orthotists are medical professionals specializing in orthotic devices like braces or foot orthoses.
  • Example of orthotics usage: A pair of AFO (Ankle Foot Orthosis) braces being used to aid bilateral foot drop.

Codification of Orthoses

  • Orthotic devices are classified into four body areas per the international classification system (ICS):
    • Lower extremities
    • Upper extremities
    • Trunk
    • Head
  • Orthoses are also classified by function:
    • Paralysis orthoses
    • Relief orthoses
  • International Standard terminology classifies orthoses by acronyms describing supported anatomical joints. Examples:
    • KAFO (knee-ankle-foot orthoses): spans knee, ankle, and foot.
    • TLSO (thoracic-lumbar-sacral orthoses): supports thoracic, lumbar, and sacral spine regions.
  • The use of the International Standard is promoted to reduce variation in orthoses descriptions, which is often a barrier to interpreting research studies.

Orthoses and Prostheses

  • The transition from an orthosis to a prosthesis can be fluid.
    • Example 1: Compensating for a leg length discrepancy, equivalent to replacing a missing part of a limb.
    • Example 2: Replacement of the forefoot after a forefoot amputation. This treatment is often made from a combination of a prosthesis to replace the forefoot and an orthosis to replace the lost muscular function (ortho prosthesis).
  • Orthotist: A specialist responsible for customising, manufacturing, and repairing orthotic devices (orthoses).
  • Manufacturing modern orthoses requires:
    • Artistic skills in modeling body shapes.
    • Manual skills in processing traditional and innovative materials.
    • CAD/CAM, CNC machines and 3D printing.
  • Orthotics combines knowledge of anatomy, physiology, pathophysiology, biomechanics, and engineering.
  • In the United States, orthotists require a prescription from a licensed healthcare provider, physical therapists are not legally authorized to prescribe orthoses.
  • In the U.K., orthotists often accept referrals from doctors or other healthcare professionals for orthotic assessment without requiring a prescription.

Types of Orthoses

  • Custom-fabricated products: Individually manufactured for optimal supply. Precise physical examination reveals functional deviations, and orthotic functions are matched to these deviations.
    • Advantage: Orthotic functions are optimally matched to functional deviations.
    • Advantage: Made to fit the individual body shape of the patient.
    • Traditionally made by following a trace of the extremity with measurements to assist in creating a well-fitted device.
    • Modern materials such as carbon fiber composites and aramid fibers as materials of choice necessitated the idea of creating a plaster of Paris mold of the body part in question.
    • Composite materials (carbon fiber, aramid fibers in epoxy resin) reduce weight.
    • Achieve stiffness where necessary (e.g., ankle-knee connection) and flexibility where required (e.g., forefoot area).
  • Semi-finished products: Used for fast supply in frequent diseases, manufactured industrially and adaptable to anatomical conditions.
    • Also referred to as prefabricated products and custom fitted products.
  • Finished products: Short-term orthoses or bandages for limited therapy duration, manufactured industrially.
    • Also referred to as off-the-shelf products.
  • Both custom-fabricated and semi-finished products are used in long-term care and are manufactured or adapted by the orthotist or by trained orthopedic technicians according to the prescription.
  • Physician/clinician defines functional deviations in prescription, e.g. paralysis (paresis) of the calf muscles (M. Triceps Surae) and derives the indication from this, e.g. orthotic to restore safety when standing and walking after a stroke.
  • Orthotist conducts physical examination, compares with physician's prescription, and describes orthosis configuration.
  • Ideally, orthotic functions and functional elements are discussed in an interdisciplinary team (physician, physical therapist, orthotist, and patient).

Lower Limb Orthoses

  • All orthoses affecting the foot, ankle, lower leg, knee, thigh, or hip joint are categorized as lower extremity orthoses.
  • Paralysis orthoses: Used for partial/complete paralysis or muscle failure (paresis).
  • Intended to correct/improve functional limitations or replace lost functions.
  • Functional leg length differences due to paralysis can be compensated for.
  • Total-contact orthotic shell is crucial for optimal fit in paralysis orthoses, custom-made orthotics are often preferred.
  • Lightweight, resilient materials like carbon fiber, titanium, and aluminum are essential for custom-made orthoses.
  • Production of custom-made orthotic also allows the integration of orthotic joints, dynamics matched to anatomical joints, dynamics take place where dictated by the patient's anatomy.
  • Orthotic joints enable stable, torsion-resistant orthotic shells, necessary for stability during standing/walking.
  • Orthosis can be individually configured through orthosis joints which offers the necessary stability to regain the security that has been lost due to paralysis when standing and walking.
  • Adjustability of functional elements compensates for functional deviations from muscle weakness.
  • High-quality orthotic fitting precisely adjusts functional elements, providing support while minimizing restriction of lower extremity dynamics to preserve remaining muscle functionality.

Physical Examination and Muscle Strength Determination

  • In paralysis cases (spinal/peripheral nervous system injury/disease), physical examination determines strength levels of leg's six major muscle groups to identify required orthosis functions.
  • Description of the functions of the large muscle groups used to define the functional elements of a paralysis orthosis intended to compensate for restricted muscle functions:
    1. Dorsiflexors: Move foot in dorsiflexion (concentric work) and control plantar flexion (eccentric work).
    2. Plantar flexors: Contribute to upright standing and move foot in plantar flexion.
    3. Knee extensors: Extend the knee.
    4. Knee flexors: Bend the knee.
    5. Hip flexors: Bend the hip joint toward the hip flexion.
    6. Hip extensors: Stretch the hip joint in the direction of the hip extension and, at the same time, extend the knee in the direction of the knee extension.
  • Muscle function test (Vladimir Janda) determines strength levels (0-5 scale).
    • 0: Complete paralysis (0%).
    • 5: Normal strength (100%).
    • Values between indicate percentage reduction.
  • All strength levels below five are called muscle weakness.
  • Muscle group strength levels determine orthosis type (AFO/KAFO) and necessary functional elements.
  • Paralysis may be caused by injury to the spinal or peripheral nervous system after spinal cord injury, or by diseases such as spina bifida, poliomyelitis and Charcot-Marie-Tooth disease.

Physical Examination for CNS Related Paralysis

  • Paralysis from central nervous system (CNS) diseases/injuries (e.g., cerebral palsy, traumatic brain injury, stroke, multiple sclerosis) causes incorrect motor impulses, resulting in gait deviations.
  • Muscle strength tests have limited usefulness due to CNS control disturbances.
  • Cerebral Palsy and Traumatic Brain Injury
    • The Amsterdam Gait Classification facilitates the assessment of the gait pattern in CP patients and patients with traumatic brain injury and helps to determine the gait type.
    • Gait pattern analysis determines necessary orthosis functions in ambulatory patients.
    • The "Amsterdam Gait Classification" describes five gait types, assessment is a two step process; in the first step, the patient is viewed from the side of the leg being assessed At the point when the leg is mid-stance the knee angle and the contact of the foot with the ground are assessed.
      1. Type 1: Normal knee angle, complete foot contact.
      2. Type 2: Hyperextended knee angle, complete foot contact.
      3. Type 3: Hyperextended knee angle, incomplete foot contact (forefoot only).
      4. Type 4: Flexed knee angle, incomplete foot contact (forefoot only).
      5. Type 5: Flexed knee angle, complete foot contact (crouch gait).
    • Patients with paralysis due to cerebral palsy or traumatic brain injury are usually treated with an ankle-foot orthosis (AFO).
    • The compensatory gait is an unconscious reaction to the lack of security when standing or walking that usually worsens with increasing age; if the right functional elements are integrated into the orthosis to counter this, and maintain physiological mobility, the right motor impulses are sent to create new cerebral connections.
    • Orthotic goal: Best possible approximation of physiological gait pattern.
  • Stroke
    • The N.A.P. Gait classification facilitates the assessment of the gait pattern in stroke patients and helps to determine the gait type.
    • Rapid orthosis care is crucial after stroke.
    • Orthoses facilitate relearning physiological standing/walking, preventing long-term consequences of abnormal gait.
    • Muscle function tests may yield incorrect results due to brain-controlled wrong impulses.
    • Early training to stand safely/balanced on both legs is essential for regaining walking ability.
    • Orthoses with balance/safety functional elements can be integrated into early physical therapy.
    • Clinical studies confirm orthoses' importance in stroke rehabilitation.
    • Ankle-foot orthoses (AFOs) are common, especially for dorsiflexor weakness causing stumbling (drop foot).
    • Adjustable functional elements can be included for setting the resistance can be included, which make it possible to adapt the passive lowering of the forefoot (plantar flexion) to the eccentric work of the dorsal flexors during loading response.
    • The N.A.P. Gait Classification assesses gait pattern in mid-stance, defining four gait types: assessment is a two step process; in the first step, the patient is viewed from the side of the leg to be assessed
      • Type 1: Hyperextended knee angle.
      • Type 2: Flexed knee angle.
      • Second step: View from front to assess foot inversion (varus, add "a") or eversion (valgus, add "b").
      • Patients classified as 1a, 1b, 2a, or 2b.
    • Orthotic goal: Best possible approximation of physiological gait pattern.
  • Multiple Sclerosis (MS)
    • Assess strength levels of major muscle groups, accounting for muscular fatigue (common in MS).
    • Fatigue affects gait parameters (cadence, walking speed).
    • Fatigue measured as muscle weakness; use six-minute walking test.
      1. First muscle function test (without muscular fatigue)
      2. Six-minute walk test directly followed by
      3. Second muscle function test (with muscular fatigue)
    • Evaluate whether muscular fatigue can be induced.
    • Include strength levels and the measured fatigue in orthosis planning.

Functional Deviations and Elements

  • Functional Deviations in Paralysis of Large Muscle Groups
    • Dorsiflexor paralysis: Results in drop foot, causes stumbling risk and impaired shock absorption.
    • Plantar flexor paralysis: Impairs balance, affects forefoot lever, causes excessive dorsiflexion and energy loss.
    • Knee extensor paralysis: Increases risk of falls when walking, may lead to compensatory mechanisms that lead to an incorrect gait pattern.
    • Knee flexor paralysis: Makes knee flexion in pre-swing more difficult.
    • Hip flexor paralysis: Makes knee flexion in pre-swing more difficult.
    • Hip extensor paralysis: Affects knee control during walking.
  • Functional Elements in Paralysis of Large Muscle Groups
    • Orthosis functional elements control ankle, knee, and hip joint movements.
    • Correct/control movements, secure joints against incorrect motions, and prevent falls.
    • Dorsiflexor weakness: Orthosis should lift forefoot during swing phase (drop foot orthosis).
    • Adjustable resistance of plantar flexion, if the dorsiflexors are very weak, Initial contact with the heel should be achieved by lifting the foot through the orthosis, and Orthoses should be adapted to the functional deviation of the dorsiflexors in order to correct the shock absorption of the heel rocker lever during loading response, but should not block plantar flexion of the ankle joint
    • Plantar flexor weakness: Orthosis must transfer strong forces like a ski boot, dynamic elements are preferable.
    • Adjustable resistance in order to protect against unwanted dorsiflexion.
    • Knee/hip extensor weakness: Orthosis provides stability and stance phase control based on weakness severity.
      • Slight weakness: Free-moving mechanical knee joint (pivot point behind anatomical).
      • Significant weakness: Knee-securing functional elements for stance phase control.
      • Stance phase control knee joints (lock knee in early stance, release in swing) enable natural gait.
      • Locked knee joints offer safety but impair swing phase, requiring compensatory mechanisms.

Ankle-Foot Orthoses (AFO)

  • AFOs are the English name for an orthosis that spans the ankle and foot.
  • Used mainly for dorsiflexor or plantar flexor weakness.
  • New materials/technologies (carbon/aramid fibers) reduce weight and allow for rigid/flexible areas.
  • AFOs should combine rigidity with ankle mobility and muscle functionality, and avoid stimulating contractures/spasticity.
  • Custom-made AFOs compensate for muscle group deviations and are configured based on function/load requirements.
  • The size of these components is selected by matching their resilience to the load data.
  • Adjustable ankle joint elements compensate for dorsiflexor/plantar flexor weakness, enabling safety and mobility.
  • Adjustable spring units with pre-compression can enable an exact adaptation of both static and dynamic resistance to the measured degree of muscle weakness.
  • An AFO with functional elements to compensate for a weakness of the plantar flexors can also be used for slight weakness of the knee-securing muscle groups, the knee extensors and the hip extensors.
  • A drop foot orthosis is an AFO that only has one functional element for lifting the forefoot in order to compensate for a weakness in the dorsiflexors. If other muscle groups, such as the plantar flexors, are weak, additional functional elements must be taken into account, making a drop foot orthosis unsuitable for patients with weakness in other muscle groups.

AFOs and Technologies

  • AFOs made with old technology (polypropylene) may block plantar flexion and is unable to transmit the high forces required to counterbalance weak plantar flexors while standing and walking.
  • ICRC's 2006 Manufacturing Guidelines aimed for standardized, high-quality AFO production worldwide.
  • AFOs made of polypropylene are called "DAFO" (dynamic ankle-foot orthosis), "SAFO" (solid ankle-foot orthosis) or "Hinged AFO".
  • AFOs Types:
    • DAFOs are not stable enough to transfer the high forces required to balance the weak plantar flexors when standing and walking
    • SAFOs block the mobility of the ankle joint
    • A "Hinged AFO" only allowed for the compensation that could be achieved with the orthotic joints of the time, for example, they commonly block plantar flexion, as the joints cannot simultaneously transmit the large forces that are required to compensate for muscle deviations while also offering the necessary dynamics.
  • Focus on improving gait via polypropylene orthotics for children with cerebral palsy.
  • Unusual to integrate modern functional elements into older polypropylene technologies, as shells are either too soft or can't transfer forces.
  • New studies demonstrate better gait improvement possibilities with current technologies.
  • ICRC guidelines require detailed explanations due to outdated terminology.

AFO Classifications

  • SAFO: Rigid AFO that Blocks both plantar flexion and dorsiflexion.
  • DAFO: Flexible AFO, that Does not provide safety when standing and walking if the plantar flexors are weak.
  • Hinged AFO: A joint itself that does not offer any further functional elements. Blocks plantar flexion.
  • Posterior Leaf Spring: DAFO often also known as "Posterior Leaf Spring" provides dynamics in the ankle but prevents the physiological plantar flexion caused by the heel lever, as the movement of the orthosis takes place behind the ankle joint.
  • FRAFO: Provides stabilization when standing and walking for weak plantar flexors. Blocks both plantar flexion and dorsiflexion.
  • AFO with stiff carbon fiber frame and dynamic ankle joint for adjustable stiffness:
    • enables dynamics in the ankle.
    • Adjustable alignment, Adjustable resistance for stabilization when standing and walking for weak plantar flexors.

Knee-Ankle-Foot Orthosis (KAFO)

  • KAFO is the abbreviation for knee-ankle-foot orthoses, which spans the knee, ankle and foot.

  • Used for patients with paraplegia, poliomyelitis, or multiple sclerosis and When there is a weakness of the knee or hip extensors.

  • It has two orthotic joints: an ankle joint between the foot and lower leg shells and a knee joint between the lower leg and thigh shells.

  • KAFOs variants:

    • Locked mechanical knee joint.
    • Unlocked mechanical knee joint.
    • Locked and unlocked mechanical knee joint.
  • KAFO with locked knee joint: Mechanical knee joint is locked in both stance and swing phases, User unlocks knee to sit, Circumduction/hip raising needed for swing, leading to increased energy consumption.

  • KAFO with unlocked knee joint: Knee joint moves freely in stance/swing, Requires minor paralysis of knee/hip extensors only, otherwise a significant risk of falling.

  • KAFO with locked and unlocked knee joint: Knee joint locks in stance, unlocks in swing and enables ~60° knee flexion, Automatic/stance phase locking knee joints improve safety/comfort, Various terms: "KAFO with automatic knee joint," "KAFO with stance phase control knee joint", Integrated functional elements compensate for dorsiflexor/plantar flexor weakness, resistances can be set separately.

Hip-Knee-Ankle-Foot Orthosis (HKAFO)

  • HKAFO is the abbreviation for hip-knee-ankle-foot orthoses which is the English name for an orthosis that spans the hip, the knee, the ankle and the foot.
  • Used when there is a weakness of the pelvic stabilizing trunk muscles.

Relief Orthoses

  • Used for joint degeneration or injuries (e.g., torn ligaments).
  • Used post-operations (joint ligaments, bony/muscular structures, joint replacement).
  • Purposes:
    • Control/guide/limit/immobilize extremity/joint/segment.
    • Restrict movement.
    • Assist movement.
    • Reduce weight-bearing forces.
    • Aid fracture rehabilitation or correct shape/function to ease movement/reduce pain.

Ulcer Healing Orthoses (UHO)

  • Custom ankle/foot orthosis for foot ulcer treatment.
  • rigid L-shaped support member with a rigid anterior support shell on an articulated hinge.
  • Plantar portion has ulcer-protecting hollow to transfer weight away, Use medial tibial flare to enhance weight-bearing, Use flexible polyethylene hinge and straps to secure.

Foot Orthoses (FO)

  • Devices inserted into shoes providing foot support and redistributing ground reaction forces.
  • Can be pre-molded (pre-fabricated) or custom-made.
  • Used for athletes, elderly, biomechanical deformities, or soft tissue conditions.
  • Effective for reducing pain in high-arched feet, rheumatoid arthritis, plantar fasciitis, metatarsophalangeal (MTP) joint pain, or hallux valgus (bunions).
  • May reduce foot pain in children with juvenile idiopathic arthritis (JIA).
  • May be used with orthopedic footwear to prevent diabetic foot ulcers.
  • A real-time weight bearing orthotic can be created using a neutral position casting device and the Vertical Foot Alignment System VFAS.

Relief Orthoses: AFO & KO

  • An ankle-foot orthosis (AFO) can also be used to immobilize the ankle and lower leg in the presence of arthritis or a fracture.
  • Ankle–foot orthoses are the most commonly used orthoses, making up about 26% of all orthoses provided in the United States.
  • Base cost of an AFO was about 500500 to 700700.
  • Knee Orthoses (KO):
    • Extends above/below the knee.
    • Supports/aligns the knee.
    • Prevents flexion/extension/instability in neurological/muscular impairments.
    • Stabilizes knee by replacing functions of ligaments/cartilage.
    • Relieves pressure from arthritis/osteoarthritis by realigning knee joint.
    • May reduce osteoarthritis pain and not meant to treat an injury or disease on its own.

Knee Braces

  • Prophylactic braces: Used by athletes in contact sports; ineffective for ACL tears but may resist MCL/LCL tears.
  • Functional braces: For those with knee injuries, reduce rotation/hyperextension and increase stability/agility.
  • Rehabilitation braces: Limit medial/lateral movement post-injury/surgery, immobilize leg, and often feature adjustable range of motion.

Soft Braces and Upper Limb Orthoses

  • Soft braces: Used to protect joints from excessive loads.
  • Bandages protect bones/joints in sport and allow proprioception.
  • Supportive functions are low.
  • Scientific literature lacks strong conclusions on effectiveness/cost-effectiveness.
  • Upper-limb orthoses: Mechanical/electromechanical devices applied externally to the arm to restore/improve function or structural characteristics.
  • Alleviate musculoskeletal problems from trauma/disease or neurological impairment from stroke/spinal cord injury/peripheral neuropathy.
  • Types of upper-limb orthoses include clavicular and shoulder orthoses, arm orthoses, functional arm orthoses, elbow orthoses, forearm-wrist orthoses, forearm-wrist-thumb orthoses, forearm-wrist-hand orthoses, hand orthoses, and upper-extremity orthoses (with special functions).

Spinal Orthoses

  • Spinal orthoses can treat scoliosis (abnormal spine curvature).
  • Common scoliosis braces: Milwaukee, Boston, Charleston, and Providence.
  • Compliance is often an issue due to appearance and movement restrictions, especially with adolescent females.
  • Spinal orthoses may treat spinal fractures.
  • Jewett brace aids healing of anterior wedge fractures (T10-L3 vertebrae).
  • Body jacket stabilizes more involved spine fractures.

Cervical Spine Orthoses and Head Orthoses

  • Several orthoses manage cervical spine pathology.
  • Halo brace immobilizes cervical spine (developed by Vernon L. Nickel, 1955).
  • Helmets (cranial molding orthoses) are used for infants with positional plagiocephaly.

Other Orthotics

  • Cognitive orthotics
  • Comparison of orthotics
  • Dental braces
  • Orthotic horseshoes
  • Neuromechanics of orthoses
  • Cervical collar
  • Orthopedic cast
  • Back brace
  • Pet orthotics