Irrigation Methods and Drainage Systems Study Notes
Overview of Irrigation and Drainage Systems
Definitions:
Irrigation: Artificial application of water to soil to supplement precipitation and optimize crop growth.
Drainage: Removal of excess surface and subsurface water to prevent waterlogging, soil aeration deficits, and root zone salinity.
Core Classifications:
Surface Irrigation: Water flows across the soil surface via gravity (furrow, basin, border).
Subsurface Irrigation: Water delivery lines placed beneath the soil surface to minimize surface evaporation.
Pressurized Irrigation: Water distributed under mechanical pressure through closed conduits (drip, sprinkler).
Furrow Irrigation Method
Mechanics: Water flows by gravity through narrow sloping channels dug between crop rows, wetting the root zone primarily via lateral movement and capillary rise.

Crop Suitability:
Ideal for row crops (, , , ).
Suitable for inundation-sensitive crops (, , , ) and fruit trees (, ).
Adapted for broadcast crops via the corrugation method ().
Slope Specifications:
Uniform slopes preferred, generally not exceeding .
Maximum recommended slope along furrows is to limit soil erosion; minimum is to ensure drainage.
On land slopes between and , furrows must be angled or aligned along contour lines; steep lands require terracing.
Construction gradient should maintain a uniform slope of .
Soil & Dimension Guidelines:
Sandy Soils: Require narrow, deep V-shaped furrows spaced apart ( for coarse sand, for fine sand) to counter rapid downward percolation.
Clay Soils: Require wide, shallow furrows spaced apart to maximize wetted perimeter and lateral infiltration. Double-ridged furrows (beds) facilitate multi-row planting and weeding.
Flow Management:
Typical stream size: up to ; absolute maximum non-erosive stream size: .
Quarter-Time Rule: Optimal distribution uniformity is achieved when water reaches the furrow advance end within of the total set time.
Planting Placement Strategies:
Heavy Rainfall Areas: Top of ridge to avoid waterlogging.
Water-Scarce Areas: Inside furrow bed to access concentrated moisture.
Saline Soils: Sides of ridge (avoiding top where capillary salts concentrate).
Cold Climates: Sunny side of ridge; Hot Climates: Shady side of ridge.
Basin Irrigation Method
Mechanics: Level land units surrounded by earth bunds where water is rapidly applied and ponded to achieve uniform depth.
Crop & Soil Suitability:
Prime method for paddy rice, pastures (, ), (Saccharum officinarum), fruit trees (, ), and cereals.
Unsuitable for root/tuber crops (, , , ) unable to withstand waterlogging for .
Prefers clays with minimal percolation for rice; loams preferred for non-rice crops. Coarse sands and capping soils are unsuitable.
Bund Design Dimensions:

Temporary Bunds: Base width , height , freeboard , containing irrigation depths of .
Permanent Bunds: Base width , constructed height , settling over several months to a final height of .
Water Supply Modes:
Direct Supply: Field channel supplies each basin directly through siphons, spills, or bund cuts.
Cascade Supply: Water flows from top terrace downwards across successive terraces; on porous soils, borrow-furrow channels are required to prevent deep percolation.
Border Irrigation Method
Mechanics: Field divided into parallel, long, sloping strips bounded by low earth dykes, irrigated from the top boundary.
Field Parameters:
Suited to large-scale mechanized farms; strip lengths reach up to or more; widths range from .
Longitudinal slope range: minimum (drainage) to maximum (erosion control); cross slope must be zero.
Maximum Dimension Guidelines:
Sand (): Slopes , unit flows , widths , lengths .
Loam (): Slopes , unit flows , widths , lengths .
Clay (): Slopes , unit flows , widths , lengths .
Cut-Off Rules for Inflow:
Clay Soils: Cut off inflow when water covers of border strip.
Loamy Soils: Cut off inflow when water covers of border strip.
Sandy Soils: Cut off inflow only after water covers of border strip.
Irrigation Channel and Canal Maintenance
Inspection Elements: Evaluate structural cracks, subsidence, leaks, bed scour, siltation, and vegetative obstruction.
Debris & Silt Clearing: Manual excavation (shovels/rakes), mechanical dredging for large reaches, or high-pressure water jetting.
Bank Stabilization: Planting vegetative buffer zones, installing riprap/rock linings, and erecting retaining walls along steep banks.
Flow Regulation: Calibrate control structures (gates, weirs, dividers) to avoid scouring velocities or still-water sedimentation.
Drip Irrigation System
Mechanics: Delivers water at low pressure ( discharge per emitter) directly into the crop root zone at frequent intervals (every ).

Core System Components:
Water Source / Storage Tank
Centrifugal Pump Unit
Pump Electricity Input
Control Unit (with timer/automation)
Primary Control Valve
Pressure Gauge
Secondary Regulating Valve
Manifold / Distribution Main
Bulb Valve & Laterals ( diameter polyethylene/PVC hoses)
Emitters/Drippers: Spaced for trees or spaced closely along rows.
Media/Screen Filters: Essential to intercept suspended debris, algae, and precipitated minerals.
Fertilizer Tank: Injects measured nutrients directly into irrigation streams (fertigation).
System Variations:
Surface Drip: Tubing laid on ground; easily installed, but subject to solar degradation and mechanical damage.
Subsurface Drip (SDI): Laterals buried underground; eliminates surface evaporation and surface weed growth; leak detection is difficult.
Point-Source: Dedicated emitters per individual tree or potted plant.
Line-Source: Continuous tubing with perforations for row crops (, ).
Operational Features:
Water volume efficiency: Saves water over surface methods by curbing deep percolation, runoff, and evaporation.
Soil coverage: Wets approximately of the total soil volume wetted by surface/sprinkler systems.
Adaptability: Functional on steep, undulating terrains; effective with saline water due to localized high moisture reducing salt stress.
Sprinkler Irrigation System
Mechanics: Water conveyed under pressure via pumps and pipelines, discharged into the atmosphere through nozzles, breaking into water droplets () that precipitate over crops.

System Configurations:
Permanent (Fixed): Buried PVC main and lateral networks with permanently positioned risers.
Portable: Manually moved surface pipes and sprinkler units.
Rotary / Impact: Rotating head models throwing wide coverage jets.
Center Pivot: Mechanized pipeline suspended on wheeled towers pivoting around a central hub.
Lateral Move: Continuous linear straight-line machine for rectangular plots.
Solid Set: Fixed grids for greenhouses and high-density horticultural plots.
Drag-Hose: Buried mainline with lateral outlets; sprinklers on skids are moved manually between designated lateral stations.
Operational Parameters:
Application Rate: Must remain lower than the basic infiltration rate of the soil to eliminate runoff.
Wetted Overlap: Sprinkler spacing must ensure an overlap of at least of the wetted circle diameter for uniform coverage.
Pressure Control: Low pressure produces oversized, erosive droplets that aggregate on the outer perimeter; excessive pressure atomizes water into fine mist susceptible to wind drift.
Criteria for Selecting an Irrigation Method
Soil Characteristics:
Coarse sandy soils with rapid percolation require drip or sprinkler systems.
Medium-to-heavy loams and clays favor furrow, border, or basin surface irrigation.
Topography & Slope:
Irregular, undulating, or steep landscapes require sprinkler or drip systems (no leveling required).
Terraced steep slopes are suitable for rice basins; gentle, uniform slopes () accommodate furrows and borders.
Climate & Water Conditions:
High winds disqualify sprinklers due to droplet distortion; drip or surface methods preferred.
Water scarcity or saline water sources favor drip systems.
Highly turbid/sediment-rich water favors surface irrigation to avoid clogging emitters and nozzles.
Socio-Economic Factors:
High capital/technology requirements for pressurized systems restrict their application to high-value cash crops.
Surface irrigation exhibits lower initial equipment costs but demands precise land leveling and higher routine labor inputs.
Agricultural Drainage Systems and Maintenance
Drainage Methodologies:
Surface Drainage: Open field drains, ditches, shaped furrows, and grassed waterways removing standing overland flow.
Subsurface Drainage: Buried perforated conduits (plastic, tile, or concrete) that depress high water tables and preserve root zone aeration.
Controlled Drainage: Adjustable control weirs on drainage outlets holding water during drought and releasing water during saturated periods.
Drainage Wells: Vertical relief wells pumped to depress artesian water tables.
Alignment Standards:
Align channels with natural contours and topographic depressions to minimize earthmoving.
Maintain consistent longitudinal gradients between to ensure gravity velocity without bed scour or pooling.
Routine System Maintenance:
Inspect culverts, catch basins, and outlets for crack damage, joint displacement, or sediment silting.
Mechanical flushes and high-pressure jetting to clear subsurface line blockages.
Silt traps, mesh grates, and geotextile wraps to exclude sediments and root intrusion.
Pre-monsoon cleaning of channels and stabilization of drain banks using riprap and vegetative covers.