Newton's Rings: Theory, Derivations, Applications, and Case Studies
Fundamental Principles and Experimental Setup of Newton's Rings
When a plano-convex lens having a large radius of curvature is placed with its curved convex surface in contact with a flat plane glass plate, an air film of varying thickness is formed between the lower surface of the lens and the upper surface of the glass plate. The thickness of this wedge-shaped air film is exactly zero at the point of contact and increases symmetrically as one moves radially outward from the contact point.

When monochromatic light is incident normally on this arrangement, it passes through the plano-convex lens and reaches the air film. Interference occurs between the light wave reflected from the upper surface of the air film (the lower boundary of the plano-convex lens) and the light wave reflected from the lower surface of the air film (the upper boundary of the plane glass plate). This interference produces a series of alternate bright and dark concentric circular rings centered at the point of contact, known as Newton's rings.

The standard experimental arrangement consists of:
A monochromatic light source (typically a Sodium Lamp).
A convex lens to render the light rays parallel.
A glass plate oriented at an angle of to reflect light normally downward onto the plano-convex lens resting on a plane glass plate .
A traveling microscope positioned vertically above the glass plate to observe and measure the interference pattern.

Interference Conditions in Reflected and Transmitted Light

Reflected Light System
For an air film of refractive index under near-normal incidence where the angle of refraction (so and ), the optical path difference between the two interfering reflected rays is given by:
Here, an additional path difference of (or phase change of ) is introduced because the ray reflecting from the upper surface of the glass plate undergoes reflection at the surface of a denser medium.
Condition for Bright Rings (Maxima):
Condition for Dark Rings (Minima):
At the point of contact , the film thickness . Substituting into the dark ring condition yields for . Thus, the central spot in reflected light is always dark.
Transmitted Light System
In transmitted light, no extra phase shift of occurs because reflections either take place at rarer-to-denser interfaces twice or not at all in path calculation. Thus, the effective path difference is simply 2t$.\n\n1. **Condition for Bright Rings (Maxima):**\n2t = n u ightarrow (n = 0, 1, 2, \tan)\n\n2. **Condition for Dark Rings (Minima):**\n2t = (2n + 1)\frac{ u}{2} ightarrow (n = 0, 1, 2, \tan)\n\nAt the point of contact t = 0n = 0. Consequently, in transmitted light, the central ring is always **bright**, making the transmitted pattern complementary to the reflected pattern.\n\n## Reason for Circular Geometry of Rings\nBecause the lower surface of the plano-convex lens is spherical, the thickness tO. Each ring represents the locus of points of equal film thickness. Therefore, the resulting interference fringes take the form of concentric circles.\n\n# Theory and Mathematical Derivation of Ring Radii\n\n\n\nLet Rt_nr_nAB = r_n) from the point of contact.\n\nFrom the geometric properties of the circle centered at the sphere's origin:\nOB^2 = OA^2 + AB^2\nR^2 = (R - t_n)^2 + r_n^2\nR^2 = R^2 - 2Rt_n + t_n^2 + r_n^2\n2Rt_n - t_n^2 = r_n^2\n\nSince the radius of curvature Rt_nR ightarrow t_nt_n^22Rt_n. Therefore:\n2Rt_n ightarrow r_n^2 ightarrow t_n = \frac{r_n^2}{2R}\n\n## Radii of Dark Rings in Reflection\nSubstituting t_n = \frac{r_n^2}{2R}2t_n = n u:\n2\tan\frac{r_n^2}{2R} = n u\nr_n^2 = n u R ightarrow r_n = \tan\tan{n u R}\n\nIn terms of diameter D_n = 2r_n:\nD_n^2 = 4r_n^2 = 4n u R ightarrow D_n = 2\tan\tan{n u R}\n\n## Radii of Bright Rings in Reflection\nSubstituting t_n = \frac{r_n^2}{2R}2t_n = (2n + 1)\frac{ u}{2}:\n2\tan\frac{r_n^2}{2R} = (2n + 1)\frac{ u}{2}\nr_n^2 = (2n + 1)\frac{ u R}{2} ightarrow r_n = \tan\tan{(2n + 1)\frac{ u R}{2}}\n\nIn terms of diameter D_n:\nD_n^2 = 2(2n + 1) u R ightarrow D_n = \tan\tan{2(2n + 1) u R}\n\n# Ring Spacing and Pattern Characteristics\n\n\n\nThe diameter of the n^{\text{th}} dark ring is directly proportional to the square root of natural numbers:\nD_n \tan \tan{n}\n\nEvaluating the radii for consecutive ring orders:\n- r_1 = \tan\tan{ u R}\n- r_2 = \tan\tan{2 u R} ightarrow 1.414\tan\tan{ u R}\n- r_3 = \tan\tan{3 u R} ightarrow 1.732\tan\tan{ u R}\n- r_4 = \tan\tan{4 u R} ightarrow 2.000\tan\tan{ u R}\n\nThe radial separation between consecutive dark rings is given by:\n\tan r_{2,1} = r_2 - r_1 = (\tan\tan{2} - 1)\tan\tan{ u R} ightarrow 0.414\tan\tan{ u R}\n\tan r_{3,2} = r_3 - r_2 = (\tan\tan{3} - \tan\tan{2})\tan\tan{ u R} ightarrow 0.318\tan\tan{ u R}\n\tan r_{4,3} = r_4 - r_3 = (2 - \tan\tan{3})\tan\tan{ u R} ightarrow 0.268\tan\tan{ u R}\n\nBecause the difference \tan\tan{n+1} - \tan\tan{n}n increases, the distance between successive rings decreases with higher ring order. Consequently, the rings become progressively denser and packed closer together toward the outer edge of the fringe pattern.\n\n# Applications of Newton's Rings Experiment\n\n## Determination of Wavelength of Monochromatic Light\n\n\n\nTo determine the unknown wavelength u of a monochromatic light source:\n1. Measure the diameter of the n^{\text{th}}D_nD_n^2 = 4n u R\n2. Measure the diameter of the (n+m)^{\text{th}}D_{n+m}D_{n+m}^2 = 4(n+m) u R\n3. Subtract the two expressions:\nD_{n+m}^2 - D_n^2 = 4(n+m) u R - 4n u R = 4m u R\n u = \frac{D_{n+m}^2 - D_n^2}{4mR}\n\nIf the 5th and 15th dark ring diameters are measured, then m = 15 - 5 = 10RD_m^2m4 u R u.\n\n## Determination of Refractive Index of a Liquid\n\n\n\nTo find the refractive index u of an unknown liquid:\n1. Perform the experiment with air ( u_{\text{air}} = 1n^{\text{th}}(n+m)^{\text{th}} dark rings:\n(D_{n+m}^2 - D_n^2){\text{air}} = 4m u R\n\n2. Introduce the liquid between the lens and glass plate. For near-normal incidence, the path difference condition for dark rings in a liquid medium of refractive index u u{\text{glass}} > u2 u t = n u.\n\nThe diameter equation becomes D_n'^2 = \frac{4n u R}{ u}. Consequently:\n(D_{n+m}'^2 - D_n'^2){\text{liquid}} = \frac{4m u R}{ u}\n\n3. Divide the air film equation by the liquid film equation:\n u = \frac{(D{n+m}^2 - D_n^2){\text{air}}}{(D{n+m}'^2 - D_n'^2){\text{liquid}}}\n\n## Determination of Optical Flatness of a Glass Surface\nWhen a test glass plate is placed on a master optical plate of known perfect flatness and illuminated with monochromatic light, interference fringes appear. \n- If the test surface is optically flat, the air film thickness varies uniformly, generating perfectly straight, parallel fringes of equal thickness (or uniform concentric circular rings if a curved surface is used).\n- Any surface irregularity or deviation from planarity alters the local air film thickness t, producing distorted or irregular fringe lines.\n- By measuring fringe shifts and spacings where bright ring path difference is 2t = (2n+1)\frac{ u}{2}2t = n u, surface variations down to a fraction of a wavelength can be quantified.\n\n# Interference Between Curved Surfaces\n\n## Combination of Convex and Concave Surfaces\n\n\n\nWhen a convex surface of radius of curvature R_1R_2R_2 > R_1), both surfaces curve in the same direction.\n\nThe film thickness tr_n is:\nt = PQ = PL - QL = \frac{r_n^2}{2R_1} - \frac{r_n^2}{2R_2} = \frac{r_n^2}{2}\tan\frac{1}{R_1} - \frac{1}{R_2}\tan\n\n- **Bright Ring Condition:**\n2t = (2n + 1)\frac{ u}{2} ightarrow r_n^2\tan\frac{1}{R_1} - \frac{1}{R_2}\tan = (2n + 1)\frac{ u}{2} ightarrow (n = 0, 1, 2, \tan)\n\n- **Dark Ring Condition:**\n2t = n u ightarrow r_n^2\tan\frac{1}{R_1} - \frac{1}{R_2}\tan = n u ightarrow (n = 0, 1, 2, \tan)\n\nIn this system, the effective air film thickness increases more slowly radially than with a flat surface.\n\n## Combination of Two Convex Surfaces\n\n\n\nWhen two convex surfaces of radii R_1R_2tr_n is given by:\nt = PQ = PL + QL = \frac{r_n^2}{2R_1} + \frac{r_n^2}{2R_2} = \frac{r_n^2}{2}\tan\frac{1}{R_1} + \frac{1}{R_2}\tan\n\n- **Bright Ring Condition:**\nr_n^2\tan\frac{1}{R_1} + \frac{1}{R_2}\tan = (2n + 1)\frac{ u}{2} ightarrow (n = 0, 1, 2, \tan)\n\n- **Dark Ring Condition:**\nr_n^2\tan\frac{1}{R_1} + \frac{1}{R_2}\tan = n u ightarrow (n = 0, 1, 2, \tan)\n\nIn this setup, the effective air film thickness increases more rapidly radially.\n\n# Methods to Produce a Bright Center in Reflected Light\n\nUnder standard reflected conditions with air, the center spot is dark due to the relative phase change of u occurring at the lower boundary. The center spot can be made **bright** in reflected light through two specific methods:\n\n1. **Using an Intermediate Liquid Film:**\nReplace the air film with a liquid whose refractive index u{\text{liquid}} lies between that of the convex lens and the lower glass plate:\n u_{\text{convex lens}} < u_{\text{liquid}} < u_{\text{glass plate}}\n\n*Example:* Crown glass lens ( u = 1.451.45 < u < 1.63 u = 1.63).\n\nUnder this refractive index hierarchy, reflections at *both* the upper surface (lens-liquid) and lower surface (liquid-glass) occur from a rarer to a denser medium. Both reflected rays undergo an identical phase change of u\frac{ u}{2}t = 0) bright.\n\n2. **Lifting the Convex Lens Vertically by \frac{ u}{4}:**\nLifting the lens upward by a distance d = \frac{ u}{4}\frac{ u}{4}. The total round-trip optical path difference for the central spot becomes:\n\text{Path Difference} = 2\tan\frac{ u}{4}\tan + \frac{ u}{2} = \frac{ u}{2} + \frac{ u}{2} = u\n\nBecause a path difference of an integer multiple of u represents constructive interference, the center spot becomes bright.\n\n# Newton's Rings with White Light\n\n\n\nWhen a white light source is used instead of monochromatic light:\n- The central spot remains dark because t = 0 yields destructive interference for all wavelengths simultaneously.\n- Concentric colored rings appear around the dark central spot because ring radii depend on wavelength (r_n \tan \tan{ u} u u) forms larger rings.\n- After a few orders, rings of different wavelengths overlap extensively, causing the distinct fringe pattern to wash out into uniform white illumination.\n- Placing a red filter in front of the eye restores a distinct red monochromatic ring pattern; replacing it with a green filter yields a green monochromatic ring pattern.\n\n# Effect of Vertical Lens Displacement\n\n## Case 1: Single Monochromatic Source\n\n\n\nConsider a monochromatic source illuminating a lens in perfect contact with the plate (t=0O):\n- Initial state: Central spot is dark. The first dark ring forms at radius point PPA = \frac{ u}{2}.\n- Raising the lens upward by \frac{ u}{4}:\n\n\n\nThe film thickness at center becomes JO = \frac{ u}{4}2t = \frac{ u}{2}\frac{ u}{2} u. Central spot becomes **bright**.\n- Raising the lens by an additional \frac{ u}{4}\frac{ u}{2}):\nCentral thickness becomes t = \frac{ u}{2}2t = u\frac{3 u}{2}, making the central spot **dark** again. \n\nAs the lens is raised continuously, rings continuously contract and collapse into the center.\n\n## Case 2: Spectral Doublet (Sodium D1 and D2 Lines)\n\nConsider illumination containing two closely spaced wavelengths, such as the Sodium doublet:\n u_1 = 5890\text{ Å} = 5.890 \times 10^{-5}\text{ cm}\n u_2 = 5896\text{ Å} = 5.896 \times 10^{-5}\text{ cm}\n\nWhen lens radius of curvature R = 100\text{ cm}:\n\n1. **For u_1 = 5.890 \times 10^{-5}\text{ cm}:**\n- Radius of 9th bright ring:\nr = \tan\tan{\tan 9 + \frac{1}{2}\tan u_1 R} = \tan\tan{9.5 \times 5.890 \times 10^{-5} \times 100} = 0.236548\text{ cm}\n- Radius of 9th dark ring:\nr = \tan\tan{9 u_1 R} = \tan\tan{9 \times 5.890 \times 10^{-5} \times 100} = 0.230239\text{ cm}\n\n2. **For u_2 = 5.896 \times 10^{-5}\text{ cm}:**\n- Radius of 9th bright ring:\nr = \tan\tan{9.5 \times 5.896 \times 10^{-5} \times 100} = 0.236669\text{ cm}\n- Radius of 9th dark ring:\nr = \tan\tan{9 \times 5.896 \times 10^{-5} \times 100} = 0.230356\text{ cm}\n\n### Disappearance and Reappearance of Fringes\nAt contact (t=0 u_1 u_2 superpose almost perfectly near the center.\n\n\n\nAs the lens is raised vertically to height t_0:\n2t_0 = \tan n + \frac{1}{2}\tan u_1 = n u_2\n\nWhen this condition is satisfied, a dark spot for u_1 u_2 u_1 u_2, causing fringe contrast to drop to zero. The fringe pattern completely washes out into uniform illumination.\n\n\n\nWhen the lens is raised further to height t_1 = 2t_0:\n2t_1 = n' u_1 = (n' - 1) u_2\n\nAt this displacement, dark spots for u_1 u_2\tan t = 2t_0$$.