Lectrure 4
Voltammetry Overview
Introduction to Voltammetry
- Definition: Based on the measurement of the current that develops as a result of concentration polarization.
- Current Relation: Current is related to concentration.
- Polarization: Induced by varying Working Electrode (WE) potential.
- Cell Structure: Assume 3-electrode cell measurements.
- Pros and Cons:
- Pros:
- Very sensitive and versatile.
- Important applications include speciation of metal ions, chemistry research, in vivo analysis.
- Cons: Less common than chromatography, AAS, ICP for trace analysis.
Excitation Signals in Voltammetry
Technique Variability: Different voltametric techniques vary in how they scan/modulate potential.
Working Electrodes
Influence Factors:
- Material and shape significantly influence the type of signal measured.Requirements for WE:
- A good WE should have very low background across a broad range of potentials.Background Causes:
- Electrochemical processes from interactions with the electrolyte solution.
- Example: The growth and removal of Platinum oxide in acidic conditions.
WE Solvent Windows
Positive Potentials: O2 evolution occurs.
Negative Potentials: H2 evolution occurs.
Solid Working Electrodes
Description: Typically a flat disc of known area embedded in an inert material.
Material Choices: Must be conductive, commonly made of Pt, Au, or carbon allotropes (e.g., glassy carbon, graphite).
Surface Maintenance: Clean electrode surface achieved by polishing.
Response Characteristics of Solid WEs
Surface State Influence: Response of the electrode relies on the surface state.
Pretreatment Necessity: Precise electrode pretreatment and polishing required for reproducible results (typically a mirror polish).
Electrode Behavior: Solid electrodes can be stationary, rotated, or used with flowing electrolyte.
Mercury Electrodes
Usage Benefits: Widely used due to:
- Low potential window suitable for trace metal analysis.
- Liquid nature allows for easy regeneration of the electrode surface by forming new drops.
- Hemispherical shape enhances diffusion rates.
- Maintained for time, followed by removal of potential (square-wave approach).
Current Behavior at Electrodes
Current Spike and Decay:
- Initially a large current spike, followed by decay.
- Current returns to zero upon removing E applied.
- Bulk concentrations of A and P remain unchanged due to small electrode size and short potential application time.Current Decay Explanation:
- Current is a measure of the rate of conversion from A to P, dictated by the flux of A to the electrode surface.
- Governed by Fick’s first law of diffusion
Planar Electrodes
Limiting Current Limitations: It’s impractical to obtain limiting currents in unstirred planar electrodes due to continuous current decay over time, with relation:
Electrochemistry at Mercury
Types: Dropping mercury electrode (DME) and hanging dropping mercury electrode (HDME).
Signal Expectations:
- DME is commonly used in polarography, a specific type of voltammetry.
Polarography Principles
Excitation Signal: In conventional DC polarography, a linearly increasing potential ramp is applied.
Initial Potential Selection: Initial potential selected to prevent the reaction of interest from occurring.
Current Measurement: Potential scanned cathodically while current is measured.
Mercury Drop Dynamics: New Hg drop formed at specified time intervals.
Typical Response Shape: Voltammetric waves generally display a sigmoidal shape.
Response Characteristics in Polarography
Current Trends:
- Once potential reaches the redox reaction threshold, current begins to flow.
- Current oscillations depend on the growth and fall of individual drops.Measurements:
- For example, concentrations of A = 0.1 mM, P = 0.0 M, KCl = 0.1M, with potential scanned from 0.0V to -1.0 V.
Current Limiting Factors
Limiting Current Relation: Limiting currents are directly proportional to analyte concentration; represented as:
Diffusion at Hemispherical Electrodes
Shape Considerations: Hemispherical shape increases analyte flux to electrode surface, resulting in diffusion-limited currents that do not decay over time.
Polarograms Characteristics
Wave Span: Current-voltage characteristic wave spans a potential range as described by the Nernst equation.
Half-Wave Potential (E½):
- Defined as the potential at which current is half its limiting value.
- Used to identify the analyte and is closely related to the standard potential .
Amperometry Basics
Underlying Principle: Amperometry involves measuring current at a fixed potential, typically one that draws the limiting current.
Applications: Commonly used in sensors for simpler and constant design.
Example Calculation in Amperometry
Setup: Limiting current increased from 13 µA to 21.5 µA after adding 100 µL of a 0.10-M lead standard to a 10-mL lead-containing sample.
Objective: Calculate the original lead concentration in the sample.
Voltammetric Measurements
Drop Contribution: For DC sampled polarography, there is a new drop for each measurement on the polarogram, providing fresh solution at the electrode surface for each point.
Drop Times: Typically around 1 second with slow scan rates (1 – 10 mV/s).
Multi-Component/Step Systems Analysis
Current Additivity: Currents are additive, and variations in E½ affect the resolution of waves.
Signal Overlap: When differences in E½ are less than the width of the wave, resolution becomes challenging.
Current Conventions
IUPAC Definitions:
- “Anodic current” results from oxidation;
- “Cathodic current” results from reduction.
Mixed Anodic-Cathodic Voltammograms
Sensitivity to Oxidation State: Polarography and Rotating Disk Electrode (RDE) responses vary based on oxidized/reduced species ratios.
Hydrodynamic Voltammetry Enhancements
Transport Improvement:
- Achieved through stirring, rotating the electrode, or flowing the solution past the WE.Mechanistic Similarity: Behaves analogously to polarography regarding wave shape and concentration resolution.
Current Magnitude: Increased stirring rates result in larger currents at the same concentration.
Flow Injection Analysis Methodology
Common Uses:
- Electrochemical detectors for chromatography; capable of detecting oxidizable/reducible compounds exiting a column.Cell Configuration: WE embedded in cell wall of a sandwich cell; typical volume 0.1 – 1 µL.
Operating Principle: Often operates as an amperometric sensor to achieve limiting current.
Rotating Disk Electrodes
RDE Application: Rotating disk electrode (RDE) used for hydrodynamic electrochemistry; rotating WE creates solution vortex contact.
Rotating Ring Disk Electrode (RRDE) Functionality
Reaction Study: Used to study reactions at electrodes; analytes contact disk first before moving across the ring.
Fixed Potential Operation: Ring potential set to oxidize any product coming from the disk reaction; facilitates product analysis.
Cyclic Voltammetry (CV) Methods
Definition: A potential sweep method where potential is varied at a constant rate between upper and lower limits (forward and reverse scans).
Differences from Polarography:
- Uses solid electrodes, potential swept as a ramp, and typically higher scan rates (5-200 mV/s) without achieving limiting currents.
Cyclic Voltammograms Characteristics
Current Dynamics: Current achieves maximum correlating to the concentration gradient, then decays post-maximum.
Reversal Effects: After scanning reversal, anodic currents emerge based on re-oxidation of accumulated species (e.g., Fe).
Peak Measurement Definitions in CV
Peak Potentials: Anodic peak potential (Epa) and cathodic peak potential (Epc) should be separated by 59.2/n mV (n = number of electrons).
Reversibility Indicator: The ratio of peak currents (ia/ic) indicates electrochemical reversibility.
Experimental Design for CV
Error Management:
- Address residual background currents from low analyte concentrations and high scan rates.
- Mitigate ohmic losses and mass transport variations with proper design.
Uses of Cyclic Voltammetry
Applications: Mainly diagnostic studies providing qualitative information about electrochemical processes (e.g., parathion analysis).
Practical Example in CV
Oxidation of Dopamine: A 2e process observed with specific anodic peak current measurements related to concentration and scan rate adjustments.
Surface-Bound Analytes in CV
Behavior Characteristics: When bound to the electrode, CV waves become symmetric, indicative of thin-layer behavior, allowing peak area integration for concentration determination.
Binding Strategies: Electrode surface modification with binding compounds or applying coatings to enhance analyte contact.
Chemically Modified Electrodes (CMEs)
Study of Properties: Investigated ion-exchange and permselectivity properties of sol-gel coated electrodes.
Example Performance Data:
- Various sol-gel coatings displaying significant increases in target signal responses while suppressing signals from interfering species.
Practical Applications of CMEs
Detection and Analysis: CMEs display enhanced results for targets in complex matrices, demonstrating improved signal response and interference suppression.
Pulse Voltammetry Overview
Method Objective: Pulse methods maximize Faradaic over non-Faradaic currents.
Common Techniques: Include differential pulse voltammetry and square wave voltammetry suitable for various electrodes.
Normal Pulse Voltammetry Explanation
Pulse Application: Involves applying pulses of increasing amplitude at predefined time intervals near drop lifespan.
Current Measurement Dynamics: Measured shortly after pulse applications, Icharging is approximately zero, contributing to enhanced sensitivity.
Differential Pulse Voltammetry Techniques
Current Measurement: Involves capturing two currents for comparison (just before and at the pulse's end), with peak current (ip) directly proportional to concentration, yielding well-defined curves.
Square Wave Voltammetry Advantages
High Sensitivity and Speed: Very fast measurement times, with currents sampled twice per cycle, allowing effective quantification of analytes in rapid tests.
Stripping Methods Description
Anodic Stripping Voltammetry (ASV): Involves pre-concentration of analytes at the WE followed by linear potential scanning for re-oxidation.
Sensitivity: ASV enables trace metal detection due to high analyte concentration factor during the electrode deposition.
Additional Stripping Techniques
Cathodic Stripping Voltammetry (CSV): Involves pre-oxidizing analytes and then scanning to more negative potentials for redox analysis.
Adsorptive Stripping: Focuses on the behavior of surface-confined species based on their surface concentration.
Multicomponent Analysis in Voltammetry
Analytical Capability: Effective for samples containing multiple analytes, with voltammograms corresponding to individual analyte signatures dependent on half-wave/peak potential separation.
Practical Examples and Applications of Voltammetry
Real-World Applications: Include biosensors in winery settings, chocolate antioxidant activity analysis, and advanced oxidation processes for wastewater remediation.
.