Energy, Work, and Power: Comprehensive Physics Study Notes

Translational Kinetic Energy

  • Definition of Kinetic Energy: Energy of an object stemming from its motion. The term "kinetic" specifically refers to motion.

  • Translation: A change in the position of an object.

  • Mathematical Expression: K=12mv2K = \frac{1}{2}m v^2     * KK represents the kinetic energy of the system.     * mm represents the mass of the object, measured in kilograms (kgkg).     * vv represents the speed of the object, measured in meters per second (m/sm/s).

  • Characteristics of Kinetic Energy:     * It is a scalar quantity (it has magnitude but no direction).     * The unit of measurement is the Joule (JJ).     * The particle itself possesses this kinetic energy.

  • Relationship Between Speed and Energy: If the speed of an object is doubled, the kinetic energy increases by a factor of four (22=42^2 = 4). For example, a block with double the speed of another identical block will possess four times the translational kinetic energy.

  • Reference Frames:     * The choice of a reference frame is critical because it determines the magnitude and direction of quantities like velocity measured by an observer.     * Observers in different reference frames may measure different speeds for the same object, thus calculating different values for kinetic energy.     * Despite this, kinetic energy remains a scalar in any chosen frame.

Examples and Calculations: Kinetic Energy

  • Bicycle System Example: A 62 kg62\,kg person riding a 12 kg12\,kg bicycle increases their speed from 3 m/s3\,m/s to 4 m/s4\,m/s by pedaling faster. Find the change in kinetic energy (ΔK\Delta K).     * Total Mass (mm): 62 kg+12 kg=74 kg62\,kg + 12\,kg = 74\,kg     * Initial Speed (viv_i): 3 m/s3\,m/s     * Final Speed (vfv_f): 4 m/s4\,m/s     * ΔK=Kf−Ki\Delta K = K_f - K_i     * ΔK=12mvf2−12mvi2\Delta K = \frac{1}{2}m v_f^2 - \frac{1}{2}m v_i^2     * ΔK=12m(vf2−vi2)\Delta K = \frac{1}{2}m (v_f^2 - v_i^2)     * ΔK=12×74×(42−32)=259 J\Delta K = \frac{1}{2} \times 74 \times (4^2 - 3^2) = 259\,J

  • Object Slowing Down: A 50 kg50\,kg object moves at 2.5 m/s2.5\,m/s then slows to 1 m/s1\,m/s.     * ΔK=12×50×(12−2.52)\Delta K = \frac{1}{2} \times 50 \times (1^2 - 2.5^2)

  • Comparing Different Vehicles: At what speed does a 1300 kg1300\,kg compact car have the same kinetic energy as a 20,000 kg20,000\,kg truck traveling at 30 km/h30\,km/h?     * Kcar=KtruckK_{car} = K_{truck}     * 12mcvc2=12mtvt2\frac{1}{2}m_c v_c^2 = \frac{1}{2}m_t v_t^2

Work and Systems

  • Terminology:     * System: A single object or a collection of objects being studied.     * Surroundings (Environment): Everything outside the defined system.     * External Interactions: Interactions occurring between the system and its environment.

  • Definition of Work: Work is the amount of mechanical energy transferred into or out of a system.     * Work can occur through external interactions.     * Energy transformations can occur within a system even if no work is done on it by the environment.

  • Fundamental Formula for Work: W=Fdcos⁡(θ)W = F d \cos(\theta)     * FF is the force exerted on the system in Newtons (NN).     * dd or Δx\Delta x is the distance or displacement over which the force is exerted in meters (mm).     * θ\theta is the angle between the force vector (FF) and the displacement vector (Δx\Delta x).

  • Key Principles of Work:     * Work is a scalar quantity, but its value can be negative.     * The unit is Joules (JJ).     * Only forces (or the components of forces) that are parallel to the displacement (Δx\Delta x) do work.

Work in Practical Scenarios

  • Constant Speed Sled Pull: In a weight-pulling competition, a dog tugs a sled 4.9 m4.9\,m across a snowy track at a constant speed using a force of 350 N350\,N.     * Work done by the dog: W=Fd=350 N×4.9 m=1715 JW = F d = 350\,N \times 4.9\,m = 1715\,J.

  • Suitcase with Inclined Strap: A suitcase is pulled at a constant speed for 120 m120\,m via a strap at a 45∘45^{\circ} angle with a tension of 20 N20\,N.     * W=Fdcos⁡(θ)=20×120×cos⁡(45∘)W = F d \cos(\theta) = 20 \times 120 \times \cos(45^{\circ}).

  • Work and Orthogonality: The tension force (FTF_T) in a pendulum does zero work because the force is always perpendicular to the instantaneous displacement (Δx\Delta x).

  • Work Done by Gravity:     * Gravity always acts on objects within a gravitational field.     * Work is only done by gravity if the object moves parallel to the gravitational force.     * If displacement is horizontal (Δx⊥mg\Delta x \perp mg), gravity does NO work.     * If displacement is vertical or has a vertical component, gravity DOES work.     * Gravity does positive work when an object move downwards (displacement and force in the same direction, θ<90∘\theta < 90^{\circ}).     * Gravity does negative work when an object moves upwards (displacement and force in opposite directions, θ>90∘\theta > 90^{\circ}).

Conservative vs. Nonconservative Forces

  • Conservative Forces:     * Definition: A force where the work done on a system is path-independent.     * Work depends only on the initial and final configuration of the system.     * Example: Gravitational force.     * Closed Path Property: Moving from point A to B and back to A results in zero net work done by gravity.

  • Nonconservative Forces:     * Definition: A force where the work done is path-dependent.     * Examples: Friction and air resistance.

  • Work Calculation for Gravity: Wg=∓mghW_g = \mp mgh     * Work depends only on vertical displacement change (hh) regardless of horizontal displacement.     * Downward motion: W=mghW = mgh.     * Upward motion: W=−mghW = -mgh.

Mechanical Energy and the Work-Energy Theorem

  • Force-Displacement Graphs: The work done can be calculated as the area under the curve of a Force (F∣∣F_{||}) vs. Displacement (dd) graph.     * Constant Force: Area of a rectangle (F0d0F_0 d_0).     * Changing Force: Area under the functional curve (e.g., triangle for linear change: 12F0d0\frac{1}{2} F_0 d_0).

  • Work-Energy Theorem: The net work done on a system is equal to the change in its kinetic energy.     * Derivation from kinematics: vf2=vi2+2aΔx→aΔx=vf2−vi22v_f^2 = v_i^2 + 2a \Delta x \rightarrow a \Delta x = \frac{v_f^2 - v_i^2}{2}.     * Multiplying by mass: maΔx=12m(vf2−vi2)m a \Delta x = \frac{1}{2}m (v_f^2 - v_i^2).     * Substituting force (F=maF = ma): FΔx=ΔK→W=ΔKF \Delta x = \Delta K \rightarrow W = \Delta K.

  • Implications:     * Positive work (W>0W > 0) increases velocity and kinetic energy.     * Negative work (W<0W < 0) decreases velocity and kinetic energy.

Potential Energy (U)

  • Definition: Potential energy is the energy of a system due to its position or configuration.

  • Favorable vs. Non-Favorable Positions: Potential energy indicates whether an object is in a position favored by a conservative force.     * Favorable position = Less potential energy.     * Non-favorable position = More potential energy.

  • Elastic Potential Energy (UsU_s):     * Potential energy stored in an ideal spring when compressed or stretched.     * Spring Constant (kk): Measured in N/mN/m.     * Distance (Δx\Delta x): Distance stretched or compressed from equilibrium length in meters (mm).     * Average Force Derivation: Since the force is changing (F=kΔxF = k \Delta x), the average force is 0+kΔx2\frac{0 + k \Delta x}{2}.     * Work Done/Stored Energy: W=FavgΔx=12k(Δx)2W = F_{avg} \Delta x = \frac{1}{2} k (\Delta x)^2.     * Formula: Us=12kΔx2U_s = \frac{1}{2} k \Delta x^2.

  • Gravitational Potential Energy (UgU_g):     * Energy associated with the position of an object in a gravitational field (object-Earth system).     * Near Surface Formula: Ug=mgyU_g = mgy         * gg is the gravitational acceleration (constant near the surface).         * yy is the vertical position.     * Reference Point: We choose a location where Ug=0U_g = 0 (usually the lowest point reached by the object). While the absolute energy value changes based on the reference, the change in potential energy (ΔUg=mgΔy\Delta U_g = mg \Delta y) is invariant.

Universal Gravitational Potential Energy

  • Beyond the Surface: When distance from the planet increases significantly, gg is no longer constant. We must use the universal law of gravitation.

  • Universal Formula: Ug=−Gm1m2rU_g = -\frac{G m_1 m_2}{r}     * GG is the universal gravitational constant.     * rr is the distance between the centers of mass of the two objects.

  • Interpretation of the Negative Sign:     * We define zero potential energy at infinity (r=∞r = \infty, Ug=0U_g = 0).     * As objects get closer together (decreasing rr), the energy must decrease from zero, thus becoming negative.

  • Multiple Object Systems: The total potential energy is the sum of the potential energy of every pair of objects in the system.     * Example for three masses (m1,m2,m3m_1, m_2, m_3): Ug=−Gm1m2r12−Gm1m3r13−Gm2m3r23U_g = -\frac{G m_1 m_2}{r_{12}} - \frac{G m_1 m_3}{r_{13}} - \frac{G m_2 m_3}{r_{23}}.

Conservation of Energy

  • The Law of Conservation of Energy: In a system where no work is done by or on the system by external forces (W=0W = 0), the total energy remains constant.

  • Mechanical Energy (EE): The sum of the kinetic and potential energy of a system (E=K+UE = K + U).

  • Internal Transfers: Any change in one type of energy (e.g., kinetic) must be balanced by an equal and opposite change in another type (e.g., potential), such that ΔE=0\Delta E = 0.

  • Problem-Solving Strategy:     1. Determine if external work is done (W=0W = 0 or W≠0W \neq 0).     2. If W=0W = 0, set initial energy equal to final energy (Ki+Ui=Kf+UfK_i + U_i = K_f + U_f).     3. If W≠0W \neq 0, set the difference in energy equal to the work done (ΔE=W\Delta E = W).     4. Identify initial and final configurations.     5. Solve for the missing variable.

  • Friction in Energy Problems:     * Work done by friction: Wf=−FfΔxW_f = -F_f \Delta x.     * Force of friction: Ff=μFNF_f = \mu F_N.     * On a flat surface: FN=mgF_N = mg.     * On an inclined surface: Find FNF_N based on the incline angle.

Power

  • Definition: Power is the rate at which work is done or the rate at which energy is transformed/changed.

  • Average Power Formula: Pavg=WΔt=ΔEΔtP_{avg} = \frac{W}{\Delta t} = \frac{\Delta E}{\Delta t}

  • Alternative Expression: P=FdΔt=FvP = \frac{F d}{\Delta t} = F v (where vv is velocity).

  • Units: The unit of power is the Watt (WW).