PHYS 108A - Lecture 19: Torque
Course Logistics and Examination Details
Midterm 2 is scheduled to take place on Tuesday, November 17.
A formal midterm review session will be conducted on Friday, November 13, at the same location as the previous exam review.
Midterm corrections are due within the week following the review announcement.
Submissions of midterm corrections require a dedicated Canvas cover sheet, which duplicates the visual structure of the original midterm exam cover sheet with fields blanked out; students must explicitly circle each question for which corrections are being submitted.
Foundations of Rotational Mechanics: Point Particles vs. Extended Objects
Point particles possess only a spatial coordinate (position) without spatial extension or physical geometry; their translational motion is fully characterized by Newton's second law ().
Extended objects have finite physical dimensions, meaning the precise spatial location where an external force is applied directly determines whether the body translates, rotates, or remains stationary.
The axis about which a system rotates is designated as the fulcrum, pivot point, center of rotation, or point of rotation.
Forces acting on an extended body do not need to be unequal to induce rotation; conversely, unequal forces can maintain complete balance if their application points are appropriately positioned relative to the pivot.
The fundamental balance principle demonstrates an inverse proportionality between the magnitude of the applied force and its distance from the pivot point: a single unit of force placed at three units of distance from the fulcrum balances three units of force positioned at one unit of distance from the fulcrum.
Torque: Definition, Geometry, and Vector Properties
Torque, represented by the Greek letter tau (), quantifies the rotational effectiveness of a force applied to an extended body about a specific pivot point.
While torque has the dimensional units of force multiplied by distance (), it is strictly distinct from work and mechanical energy; torque is a vector quantity, and its units must never be designated as Joules ().
The lever arm () is the displacement vector directed from the pivot point (tail) to the point where the force is exerted (head).
Resolving an applied force into directional components relative to the lever arm yields:
Parallel component (): Acts directly along the line of the lever arm (pointing toward or away from the pivot); this component exerts zero rotational influence () and merely tensions or compresses the structure.
Perpendicular component (): Acts at a right angle to the lever arm; this is the exclusive component that generates rotational acceleration.
When extending the line of the lever arm, the angle between the lever arm vector and the force vector is . Because the perpendicular component corresponds to the opposite side of the vector triangle, it is given by:
The universal scalar formula for torque is:
Directional conventions for torque:
Counterclockwise (CCW) rotation corresponds to a positive torque ().
Clockwise (CW) rotation corresponds to a negative torque ().
The Right-Hand Rule defines rotational orientation: curling the fingers of the right hand in the counterclockwise direction causes the thumb to point outward, defining the positive rotational vector axis.
Conceptual application (Opening a Door):
Pushing directly parallel toward the door hinge produces zero torque because , making .
Pushing perpendicularly () at the outer edge maximizes the lever arm () and achieves the maximum possible torque for a given force magnitude ().
Pushing perpendicularly close to the hinge dramatically reduces , demanding significantly higher applied force to produce the torque necessary to rotate the door.
Static Equilibrium of Extended Bodies
Complete static equilibrium for an extended body requires two simultaneous independent conditions:
Translational Equilibrium: The net external force acting on the center of mass must equal zero:
The linear velocity is zero () and linear acceleration is zero ().
Rotational Equilibrium: The net external torque acting about any chosen pivot axis must equal zero:
The angular velocity () is zero () and angular acceleration is zero ().
Quantitative Example (The Balanced Scale with Apples):
Pivot configuration: Scale balanced on a fulcrum with an upward normal force () equal and opposite to the total downward weight.
Left side load: A single large apple with mass situated at distance from the fulcrum:
This torque acts in the counterclockwise direction, making it positive.
Right side load: Three apples of equivalent unit mass placed at distance from the fulcrum:
This torque acts in the clockwise direction, making it negative.
Net torque summation:
The system remains in static rotational equilibrium.
Center of Gravity and Extended Mass Distributions
The center of gravity represents the single unique point where the entire gravitational force acting on an extended body can be considered to act.
When an extended body is positioned on top of another supported structure:
If the body's center of gravity lies to the right of the support fulcrum, it generates an uncountered clockwise torque, tilting the system to the right.
If the body's center of gravity shifts to the left of the fulcrum, it produces a counterclockwise torque, tilting the system to the left.
If the center of gravity is positioned directly above the fulcrum, the lever arm to the gravitational force is zero (), resulting in zero net gravitational torque and maintaining perfect balance.
Experimental determination: A person lying on a rigid plank balanced across a cylindrical roller or fulcrum can determine their exact anatomical center of gravity by adjusting position until rotational equilibrium is achieved.
Mechanical Advantage and Simple Machines
Static Analysis of a Supported Beam:
An iron bar of length is pinned to a wall at a hinge (pivot) and holds a load mass at its far end.
Downward load force (weight):
Downward load torque about the hinge:
Case 1: Lifting force applied close to the hinge ():
Case 2: Lifting force applied far from the hinge ():
The lever arm is increased by a factor of ().
Because torque is conserved, the required applied force decreases by a factor of :
Local Force on the Load:
Despite the user exerting in Case 1 or in Case 2, the suspended weight itself experiences only the exact upward contact force needed to support its own weight ().
Mechanical Advantage ():
Defined as the ratio of output force exerted on the load to the input force applied by the operator:
For Case 1 ():
For Case 2 ():
Mechanical Advantage Greater Than Unity ():
In tools such as a crowbar, the fulcrum is situated between the input force and output force, or the input lever arm is significantly longer than the output lever arm, permitting a small input force to produce a large output force.
The Work-Distance Trade-Off:
A high mechanical advantage reduces the required input force but requires the input force to move through a proportionally large displacement distance ().
A low mechanical advantage () requires substantial input force, but a minute displacement of the input point generates a massive displacement at the load.
Conservation of work holds across both configurations: the total mechanical work () required to elevate the load through a given vertical height remains constant.
Free Body Equilibrium and Hinge Reaction Forces
Replacing the lifting person with a taut support rope attached at angles:
Configuration A: Rope attached at , oriented at an angle of to the bar.
Configuration B: Rope attached at , oriented at an angle of to the bar.
Tension Force Vector Decomposition:
The tension vector () must be oriented strictly along the axis of the rope.
The required perpendicular component () must match the vertical lifting force computed from rotational equilibrium ( for ; for ).
Because the rope angles upward and backward toward the wall, tension introduces a horizontal component () pointing to the left and a vertical component () pointing upward.
The Necessity of Hinge Reaction Forces:
A two-force system consisting solely of downward load weight and upward-left rope tension cannot achieve static equilibrium, as the leftward horizontal force and excess vertical force remain uncountered.
The hinge must provide a contact normal reaction force () to enforce complete static equilibrium ().
Equations of Equilibrium for the Hinge:
Horizontal component balance:
Since the gravity force has no horizontal component () and tension pulls left ():
The hinge exerts a normal force pointing to the right (positive x-direction).
Vertical component balance:
With :
Because the upward tension component () exceeds the downward weight (), is negative, meaning the hinge must press downward to stabilize the bar.
The net reaction force at the hinge points down and to the right (Fourth quadrant).
Biomechanical Applications of Lever Systems
The musculoskeletal architecture of the human arm operates as a lever system analogous to the pinned beam supported close to the pivot (Configuration A):
The elbow joint functions as the hinge/fulcrum.
The forearm and hand act as the extended lever bar holding the external weight.
The biceps muscle functions as the tension cable, inserting onto the radius/ulna extremely close to the elbow joint.
Mechanical Consequences of Anatomical Geometry:
Because the muscle insertion distance () is exceedingly small compared to the distance to the load held in the hand (), the human arm operates at an extreme mechanical disadvantage ().
Internal muscle tension must be dramatically greater than the external weight being supported or lifted; muscles are intrinsically far stronger than the external forces they manipulate.
Evolutionary and Functional Advantages:
Massive Range of Motion: A minute linear contraction of the biceps muscle produces an expansive, high-velocity displacement sweep of the hand.
Structural Compactness: Attaching tendons close to joints maintains a tight, compact bodily envelope, eliminating the requirement for long, cumbersome muscle paths spanning outward to the wrist.
Questions and Discussion
Inquiry regarding angle determination in the torque equation:
Question (Amelia): Does the angle always represent the angle between the lever arm vector (radius vector) and the force vector, rather than other geometrical angles in the setup?
Response: Yes, is strictly defined as the angle measured between the direction of the lever arm vector and the line of action of the applied force vector.
Inquiry regarding anatomical arm movement:
Question: How does the human arm mechanically execute the action of holding and lifting an external weight?
Response: Movement is generated by muscle contraction; the muscle tendon attaches close to the joint fulcrum, producing tension that supplies the counterclockwise torque required to overcome the clockwise gravitational torque of the load.
Assignment Specifications: PHYS 108A Homework 9
General Submission Standards:
Units must be explicitly tracked throughout all calculations.
Numerical results must be reported using the correct number of significant figures.
Clear, fully labeled physical diagrams are required where relevant.
Part Q1: Textbook Problems (12 points total, starting on page 266 in "Problems and Exercises"):
Section 6.3 Centripetal Force:
(a) (1 point): Question 25
(b) (3 points): Question 27abc
(c) (3 points): Question 29ab
(d) (2 points): Question 31
Section 6.4 Newton's Universal Law of Gravitation:
(e) (3 points): Question 39ab
Part Q2: Non-Book Problems (8 points total):
Problem Description: A lunar-bound rocket shuts off its thrusters at an altitude of above the Earth's surface, corresponding to an initial orbital radius of from the Earth's center. The orbital distance to the Moon is . The rocket must possess sufficient initial kinetic energy at thruster shutoff to reach the Moon's orbital distance prior to being pulled back toward Earth by gravitational attraction. Atmospheric drag and lunar gravity are to be neglected.
Problem 1 (2 points): Derive a symbolic/analytic formula for the required minimum shutoff speed .
Problem 2 (3 points): Compute the exact numerical value of , explicitly documenting all power-of-ten manipulations.
Problem 3 (2 points): Compare the calculated value of to the Earth's escape velocity (). Determine whether is greater than, less than, or equal to and provide physical justification. Evaluation requires three significant figures of precision.
Problem 4 (1 point): Calculate how much faster the Moon travels relative to the rocket at the instant the rocket reaches its apex height (utilizing the Earth-relative orbital speed of the Moon established in lecture).