The scientific method

1. The Scientific Method

The scientific method is a systematic approach to investigating phenomena, acquiring new knowledge, and solving problems.

  1. State the Problem

    • Formulate a clear, specific question based on an observation.

  2. Research the Problem

    • Gather background information through literature, scientific journals, and reliable sources.

  3. Hypothesizing

    • Formulate a testable, falsifiable statement or prediction, commonly structured as an "if-then" statement.

  4. Testing the Hypothesis (Experimentation)

    • Independent Variable: The single factor intentionally changed or manipulated by the experimenter.

    • Dependent Variable: The measurable outcome or response caused by changes in the independent variable.

    • Control Group: The standard of comparison that does not receive the independent variable.

    • Constants: All environmental and experimental variables kept strictly identical across trials.

  5. Recording and Analyzing Data

    • Systematically record raw data using tables and visualize trends using charts or graphs.

  6. Stating the Conclusion

    • Interpret data to determine whether the results support or refute the hypothesis.

  7. Retesting and Peer Communication

    • Experiments must be repeated to validate reproducibility before findings are shared with the broader scientific community.

2. Qualitative vs. Quantitative Observations
  • Qualitative Data: Descriptive, non-numerical observations based on sensory characteristics.

    • Examples: "The building is tall"; "The bike ride takes a long time"; "I live far away."

  • Quantitative Data: Measurable observations expressed as specific numbers and units obtained by counting or measuring.

    • Examples: 31.5 m31.5\,\text{m} deep; $4.25 per pound\$4.25\,\text{per pound}; 75∘F75^\circ\text{F} .

3. Accuracy, Precision, and Error
  • Accuracy: How close a measured value is to the true or accepted standard value.

  • Precision: How close repeated measurements under unchanged conditions are to one another (reproducibility).

  • Types of Values:

    • Accepted Value: The established, correct value based on authoritative references.

    • Experimental Value: The value measured directly during laboratory investigations.

  • Percent Error Calculation: Percent Error=Accepted−ExperimentalAccepted×100\text{Percent Error} = \frac{\text{Accepted} - \text{Experimental}}{\text{Accepted}} \times 100

    • A percent error of 0%0\% indicates complete accuracy.

4. Uncertainty and Significant Figures
Measurement Uncertainty
  • In any measured value, all certain digits are reported plus one final estimated (uncertain) digit.

  • Estimating Uncertainty: For an analog measuring tool, uncertainty is determined by halving the smallest increment:
    Uncertainty=Smallest Mark2\text{Uncertainty} = \frac{\text{Smallest Mark}}{2}

  • Measuring tools with smaller increments have lower uncertainty and yield higher precision.

Rules for Determining Significant Figures
  1. Nonzero Digits: Every nonzero digit in a measurement is always significant.

  2. Exact Numbers: Exact counts or defined conversion factors carry an infinite number of significant figures.

  3. Sandwiched Zeros: Zeros between nonzero digits are always significant (e.g., 505505 contains 33 significant figures).

  4. Leading Zeros: Zeros appearing in front of all nonzero digits function only as placeholders and are not significant (e.g., 0.0040.004 contains 11 significant figure).

  5. Trailing Zeros with Decimals: Zeros at the end of a number and to the right of a decimal point are significant (e.g., 4.504.50 contains 33 significant figures).

  6. Trailing Zeros without Decimals: Zeros at the end of a number without a visible decimal point are not significant.

Rounding Rules
  • If the digit immediately following the last retained digit is ≥5\ge 5, increase the last retained digit by 11.

  • If the digit is <5< 5, leave the last retained digit unchanged.

Significant Figures in Calculations
  • A calculated answer can never be more precise than the least precise measurement used to compute it.

  • Addition and Subtraction:

    • Round the final result to match the measurement with the fewest digits to the right of the decimal point.

    • When working with whole numbers, round the answer to the place value of the leftmost uncertain digit.

  • Multiplication and Division:

    • Round the final result so it contains the same number of significant figures as the measurement with the fewest total significant figures.