Kinematics: Reference Frames, Position, and Rectilinear Motion

Fundamentals of Kinematics: Describing Motion and Reference Frames

  • Definition of Motion:

    • The motion of a body is defined as the change in its position over the course of time.
    • To accurately describe the motion of any object, it is strictly necessary to know the successive positions that the body occupies relative to a chosen reference frame (referencial).
    • A position cannot be defined in absolute isolation; position always exists relative to a specified frame of reference.
  • Definition of a Reference Frame (Referencial):

    • A reference frame can be any physical body or coordinate system chosen as a reference point for the study and observation of motion.
    • The determination of position requires identifying a reference frame:         Position→in a Reference Frame\text{Position} \rightarrow \text{in a Reference Frame}
  • Relativity of Rest and Motion:

    • The state of rest or motion of an object is never absolute; it depends entirely on the reference frame selected.
    • A single body can be simultaneously at rest with respect to one frame of reference and in motion with respect to a different frame of reference.
    • Condition for Motion: A body is in motion relative to a reference frame if its position relative to that frame varies as time passes.
    • Condition for Rest: A body is at rest relative to a reference frame if its position relative to that frame does not vary as time passes.
  • Case Analysis: Cyclist on a Straight Road:

    • Consider a cyclist riding along a straight path past roadside landmarks such as a house or a tree.

    Cyclist on a straight road passing a house and tree

*   **Relative to the House or Tree (Reference Frame):**
    *   The cyclist is in **motion** because, as time elapses, their spatial position continuously changes relative to the stationary house or tree.
*   **Relative to the Bicycle Saddle (Reference Frame):**
    *   The cyclist is at **rest** because, as time elapses, the distance and orientation between the cyclist and the bicycle saddle remain strictly constant; the position does not vary relative to this reference frame.
  • Standard Units of Position:
    • Indicating the exact position of a body at any given instant during its motion requires full specification of the chosen reference frame.
    • In the International System of Units (SI), the standard unit of measurement for position is the meter, denoted by the symbol m\text{m}.

Coordinate Reference Frames and Straight-Line Motion

  • Dimensionality of Coordinate Frames:

    • A coordinate axis reference frame (referencial de eixos coordenados) can be established with one, two, or three axes depending on the geometry and degrees of freedom of the motion being investigated:
      • One Axis (1D1\text{D}): Used for linear or one-dimensional motion (motion along a straight line).
      • Two Axes (2D2\text{D}): Used for planar or two-dimensional motion (motion in a plane, such as a projectile or circular trajectory).
      • Three Axes (3D3\text{D}): Used for spatial or three-dimensional motion throughout volumetric space.
  • One-Dimensional (Rectilinear) Reference Systems:

    • The appropriate reference frame for analyzing straight-line (rectilinear) motion—such as an automobile traveling along a straight highway—is a single oriented coordinate axis aligned with the direction of motion.
    • A specific point along this straight path is selected as the origin of the reference frame, designated as position x=0 mx = 0\,\text{m}.
    • In horizontal rectilinear motion, the position of an object at any specific instant is given by its abscissa, represented by the coordinate variable xx, measured in meters (m\text{m}) relative to the origin 00.
  • Orientation and Sense of Motion:

    • Along the direction of the horizontal axis (xx-axis), the directional arrowhead of the coordinate line establishes the positive direction (sentido positivo).
    • Positive Sense of Motion:
      • When an object moves such that its coordinate values increase, it moves in the positive direction.
      • Example: An object moving from position x=20 mx = 20\,\text{m} to position x=50 mx = 50\,\text{m} is traveling in the positive sense.
    • Negative Sense of Motion:
      • When an object moves such that its coordinate values decrease, it moves in the negative direction (sentido negativo).
      • Example: An object moving from position x=50 mx = 50\,\text{m} to position x=20 mx = 20\,\text{m} is traveling in the negative sense.
  • Initial Positions:

    • An object does not need to begin its journey at the origin of the chosen coordinate axis.
    • At the initial instant of observation, t=0 st = 0\,\text{s}, a body can occupy an initial position that is non-zero (x≠0 mx \neq 0\,\text{m}), located at any coordinate along the axis.

Kinematic Variables: Position, Instants, and Time Intervals

  • Temporal Instant (tt):

    • An instant designates a precise, specific point in time at which a measurement, position, or event occurs, expressed in seconds (s\text{s}).
  • Time Interval (Δt\Delta t):

    • The duration that elapses between two distinct temporal instants is termed the time interval, denoted as Δt\Delta t.
    • Mathematical formulation:         Δt=tfinal−tinitial\Delta t = t_{\text{final}} - t_{\text{initial}}
    • Worked Example (Automobile Motion between Points AA and BB):
      • Initial instant at point AA: tA=8 st_A = 8\,\text{s}
      • Final instant at point BB: tB=10 st_B = 10\,\text{s}
      • Elapsed time interval calculation:             Δt=tB−tA\Delta t = t_B - t_AΔt=10 s−8 s=2 s\Delta t = 10\,\text{s} - 8\,\text{s} = 2\,\text{s}
  • Observational Data Analysis: Cyclist Approaching a Street Lamp:

    • Consider a scenario where a street lamp is designated as the coordinate origin (x=0 mx = 0\,\text{m}) along a straight horizontal path, and the coordinate values increase away from the lamp.
    • Recorded successive positions and corresponding instants of a cyclist approaching the lamp in a straight line:
      • At instant t=0 st = 0\,\text{s}, the cyclist is at coordinate position x=160 mx = 160\,\text{m}.
      • At instant t=5 st = 5\,\text{s}, the cyclist is at coordinate position x=100 mx = 100\,\text{m}.
      • At instant t=9.5 st = 9.5\,\text{s}, the cyclist is at coordinate position x=40 mx = 40\,\text{m}.
      • At instant t=12 st = 12\,\text{s}, the cyclist is at coordinate position x=10 mx = 10\,\text{m}.
    • Key Kinematic Inferences from the Data:
      • Starting Position: When the cyclist initiated the observed motion at t=0 st = 0\,\text{s}, they were situated at position x=160 mx = 160\,\text{m}.
      • Passage through Intermediate Coordinates: The cyclist passed the intermediate position x=80 mx = 80\,\text{m} during the time interval between t=5 st = 5\,\text{s} (x=100 mx = 100\,\text{m}) and t=9.5 st = 9.5\,\text{s} (x=40 mx = 40\,\text{m}).
      • Sense of Motion: The cyclist traveled in the negative direction (sentido negativo), because over time, the position coordinate strictly decreases (160 m→100 m→40 m→10 m160\,\text{m} \rightarrow 100\,\text{m} \rightarrow 40\,\text{m} \rightarrow 10\,\text{m}) toward the coordinate origin (x=0 mx = 0\,\text{m}).

Conceptual Application Scenarios

  • Scenario 1: Passenger Seated on an Airplane in Flight:

    • Question: When seated inside an airplane cruising in flight, are you at rest or in motion? Provide justification.
    • Physical Analysis and Justification: The physical state depends entirely upon the selected frame of reference:
      • Relative to the Airplane (Reference Frame): You are in a state of rest, because your relative position with respect to the aircraft's cabin, walls, and seats does not change over time.
      • Relative to the Earth / Ground Surface (Reference Frame): You are in a state of motion, because as the aircraft travels across the sky, your position relative to fixed landmarks on the Earth's surface changes continuously over time.
  • Scenario 2: Passenger Ascending an Escalator:

    • Question: When standing on an escalator moving upward:
      • Are you at rest relative to the escalator or relative to the ground?
      • Are you in motion relative to the escalator or relative to the ground?
    • Physical Analysis and Justification:
      • Relative to the Escalator: You are at rest, because your spatial position relative to the steps and handrail of the escalator remains fixed and does not change over time.
      • Relative to the Ground / Floor Surface: You are in motion, because as the mechanical stairs ascend, your spatial coordinates relative to the stationary ground floor or building foundation continuously change over time.