Chemistry in Action - Science 20F
Fundamental Structure of the Atom and Subatomic Particles
Definition of the Atom:
An atom is the smallest part of an element that still retains all the chemical and physical properties of that element.
All matter is composed of combinations of atoms.
Subatomic Particle Properties:
Electrons (): Tiny, extremely light particles that carry a negative electrical charge (). In structural models, electrons orbit the central nucleus in designated energy levels or shells, analogous to planets orbiting the sun. Electrons are considered practically weightless in mass calculations.
Protons (): Substantially larger and heavier than electrons, carrying an opposite positive electrical charge (). Protons are bound inside the dense central nucleus.
Neutrons (): Large and heavy particles with a mass comparable to protons, but possessing no electrical charge (neutral, ). Neutrons are situated alongside protons inside the nucleus.
Nuclear Mass and Atomic Identity:
Essentially all the mass of an atom is concentrated within its nucleus due to the presence of protons and neutrons.
An element is a pure substance whose constituent atoms all share the exact same atomic number (the number of protons in the nucleus).
In any given element, the number of protons is strictly fixed and cannot change during chemical processes. While the quantity of electrons or neutrons can vary, altering the proton count fundamentally changes the element itself.

Atomic Calculations, Periodic Table Tiles, and Bohr Models
Decoding Periodic Table Information:
Periodic table element tiles provide essential quantitative data for atomic calculations:
Atomic Number: Denotes the total number of protons in the nucleus of an atom. In a neutral atom, it also equals the total number of electrons.
Element Symbol: A one- or two-letter abbreviation representing the element name.
Element Name: The full standard name of the element.
Atomic Mass: The average mass of the atom, which represents the sum of protons and neutrons ().

Mathematical Formulas for Subatomic Quantities:
Protons and electrons in a neutral atom:
Neutrons in an atom:
Subatomic Inventory Data Reference:
Lithium (): Atomic number = , Atomic mass = , Protons = , Neutrons = , Electrons = .
Phosphorus (): Atomic number = , Atomic mass = , Protons = , Neutrons = , Electrons = .
Chlorine (): Atomic number = , Atomic mass = , Protons = , Neutrons = , Electrons = .
Nickel (): Atomic number = , Atomic mass = , Protons = , Neutrons = , Electrons = .
Potassium (): Atomic number = , Atomic mass = , Protons = , Neutrons = , Electrons = .
Silver (): Atomic number = , Atomic mass = , Protons = , Neutrons = , Electrons = .
Hydrogen (): Atomic number = , Atomic mass = , Protons = , Neutrons = , Electrons = .
Silicon (): Atomic number = , Atomic mass = , Protons = , Neutrons = , Electrons = .
Tungsten (): Atomic number = , Atomic mass = , Protons = , Neutrons = , Electrons = .
Neon (): Atomic number = , Atomic mass = , Protons = , Neutrons = , Electrons = .
Procedural Rules for Drawing Bohr Models:
Step 1: Calculate the exact number of subatomic particles (, , ) using the atomic number and rounded mass number.
Step 2: Draw a circular nucleus in the center. Write the proton count and neutron count inside the nucleus utilizing the designations
p+andn0.Step 3: Draw concentric circular shells (orbits) surrounding the nucleus. The required number of electron shells is equal to the period (horizontal row number) of the element on the periodic table.
Step 4: Place electrons as discrete dots onto the orbits starting from the shell closest to the nucleus (lowest energy level) and working outward. Shell capacities are strictly limited:
First shell (innermost) maximum capacity =
Second shell maximum capacity =
Third shell maximum capacity =
Distribute electrons symmetrically across the shells, pairing them up as orbits fill.
Worked Example — Fluorine ():
Atomic number = , Atomic mass =
Subatomic particles: , ,
Shell distribution: Period ( shells). First shell = , Second shell = .

Bohr Configurations for Selected Standard Elements:
Helium (): Atomic # = , Mass # = , , , . (Shell 1: \,e; full outer shell).
Lithium (): Atomic # = , Mass # = , , , . (Shell 1: \,e, Shell 2: \,e).
Neon (): Atomic # = , Mass # = , , , . (Shell 1: \,e, Shell 2: \,e; full outer shell).
Magnesium (): Atomic # = , Mass # = , , , . (Shell 1: \,e, Shell 2: \,e, Shell 3: \,e).
Silicon (): Atomic # = , Mass # = , , , . (Shell 1: \,e, Shell 2: \,e, Shell 3: \,e).
Chlorine (): Atomic # = , Mass # = , , , . (Shell 1: \,e, Shell 2: \,e, Shell 3: \,e).
Organization of the Periodic Table: Metals, Non-Metals, and Metalloids
Broad Classification of Elements:
Metals:
Located on the left side of the periodic table, exclusively to the left of the staircase zigzag line (with the exception of Hydrogen).
Physical state: Most are lustrous (shiny) solids at room temperature (Mercury, , is a liquid metal).
Conductivity: Highly efficient thermal and electrical conductors.
Mechanical properties: Characterized by ductility (capable of being drawn into thin wires) and malleability (capable of being hammered or rolled into thin sheets without fracturing or cracking).
Non-Metals:
Positioned on the right side of the periodic table, situated to the right of the zigzag boundary.
Physical state: Predominantly gases or brittle, dull solids at room temperature (Bromine, , is a liquid non-metal).
Conductivity: Poor electrical and thermal conductors (effective insulators).
Metalloids (Semimetals):
Clustered directly along the zigzag staircase line, bordering metals and non-metals.
Includes elements touching the line (Boron, Silicon, Germanium, Arsenic, Antimony, Tellurium, Polonium), with the exception of Aluminum, which is classified as a metal.
Display hybrid characteristics intermediate between metals and non-metals.

Periodic Families, Valence Shells, and Lewis Dot Structures
Periods vs. Families (Groups):
Periods: The horizontal rows on the periodic table, numbered through from top to bottom. Moving across a period, each element gains one proton and one electron in its valence level. Period contains only and ; Period contains elements: Lithium (), Beryllium (), Boron (), Carbon (), Nitrogen (), Oxygen (), Fluorine (), and Neon ().
Families (Groups): The vertical columns, grouped into tall columns designated to (or Groups , , and –) and shorter central transition series columns ( to , Groups –). Elements within the same family exhibit analogous chemical properties and reactivity patterns due to identical valence electron configurations.
Distinct Chemical Families:
Alkali Metals (Group 1 / 1A): Highly reactive, soft metallic solids that react vigorously with air and water. Possess exactly valence electron in their outermost shell.
Alkaline Earth Metals (Group 2 / 2A): Reactive metallic elements (less violent than alkali metals). Possess valence electrons.
Transition Metals (Groups 3–12 / B-Groups): Hard, dense metals capable of displaying multiple variable oxidation states (combining capacities).
Chalcogens (Group 16 / 6A): Non-metals containing valence electrons.
Halogens (Group 17 / 7A): The most reactive non-metallic family, forming salts with metals. Possess valence electrons.
Noble Gases (Group 18 / 8A): Colorless, odorless, non-reactive (inert) gases at room temperature. Possess completely filled outer valence shells ( valence electrons, except Helium which has valence electrons). Because their outer shells are stable and filled, they do not bond under normal environmental conditions.
Valence Electrons:
Valence electrons are defined as the electrons residing in the outermost energy shell of an atom. They dictate the chemical reactivity and bonding behavior of an element.
Tall column number directly specifies valence count:
Tall column : valence electron
Tall column : valence electrons
Tall column (Group 13): valence electrons
Tall column (Group 14): valence electrons
Tall column (Group 15): valence electrons
Tall column (Group 16): valence electrons
Tall column (Group 17): valence electrons
Tall column (Group 18): valence electrons (Helium exception = \,e)
Lewis Dot Structures (Electron Dot Diagrams):
A shorthand system that depicts the valence electrons of an atom as dots placed around the element symbol.
The element symbol represents the atomic core (the nucleus plus all filled interior electron shells).
Drawing Rules: Place up to four dots individually on the four cardinal sides of the symbol before pairing any dots. The maximum number of dots possible is eight.
Examples:
Sodium (, 11 electrons): Shells ; valence electron. Represented as
Silicon (, 14 electrons): Shells ; valence electrons. Represented as four unpaired dots around .
Oxygen (, 8 electrons): Shells ; valence electrons. Represented as two paired sides and two single dots around .
Chlorine (, 17 electrons): Shells ; valence electrons. Represented as three pairs and one single dot around .
Argon (, 18 electrons): Shells ; valence electrons. Represented as four pairs surrounding .
Ion Formation and Electrostatic Charges
Principles of Ion Formation:
Neutral atoms have equivalent numbers of protons and electrons, resulting in an overall net charge of zero.
When an atom undergoes a chemical change, the number of protons in the nucleus remains unchanged, but the atom may gain or lose valence electrons to achieve the stable electron configuration of its nearest noble gas (a full outer valence shell, or octet).
An atom or group of bonded atoms that acquires an electrical charge by gaining or losing electrons is called an ion.
Cations (Positive Ions):
Formed when an atom loses electrons, leaving more positively charged protons in the nucleus than electrons in the surrounding shells.
Metals universally form cations.
Cation charge corresponds precisely to the number of electrons lost:
Lithium atom () loses to become (, charge ).
Sodium atom () loses to become (, charge ).
Magnesium atom () loses to become (, charge ).
Aluminum atom () loses to become (, charge ).

Anions (Negative Ions):
Formed when an atom gains electrons, causing the total count of negatively charged electrons to exceed the number of protons.
Non-metals universally form anions.
Anion charge corresponds precisely to the number of electrons acquired:
Chlorine atom () gains to become Chloride, (, charge ).
Oxygen atom () gains to become Oxide, (, charge ).
Nitrogen atom () gains to become Nitride, (, charge ).

Systematic Valence Charge Inventory for Common Elements:
Sodium (): valence electron; loses ; ionic charge = ().
Beryllium (): valence electrons; loses ; ionic charge = ().
Chlorine (): valence electrons; gains ; ionic charge = ().
Sulfur (): valence electrons; gains ; ionic charge = ().
Aluminum (): valence electrons; loses ; ionic charge = ().
Neon (): valence electrons; neither gains nor loses; charge = (inert noble gas).
Potassium (): valence electron; loses ; ionic charge = ().
Nitrogen (): valence electrons; gains ; ionic charge = ().
Calcium (): valence electrons; loses ; ionic charge = ().
Phosphorus (): valence electrons; gains ; ionic charge = ().
Magnesium (): valence electrons; loses ; ionic charge = ().
Chemical Bonding: Ionic Compounds and Binary Nomenclature
Nature of the Ionic Bond:
Ionic bonds occur exclusively between metals (which readily donate electrons) and non-metals (which readily accept electrons).
The strong electrostatic attraction between oppositely charged cations () and anions () holds the compound together.
In the formation of table salt (), a sodium atom transfers its single valence electron directly to a chlorine atom, leaving both species with stable valence octets.

Physical Properties of Ionic Compounds:
Form extensive, rigid three-dimensional crystal lattices with high melting and boiling points.
Dissolve readily in water and polar solvents.
Dissociate into mobile, freely floating ions in aqueous solution, thereby conducting electrical currents efficiently.

Rules for Naming Simple Binary Ionic Compounds:
Name the metal (cation) first, retaining its regular elemental name.
Name the non-metal (anion) second, dropping its terminal ending and replacing it with the suffix "-ide" (e.g., chlorine becomes chloride, oxygen becomes oxide).
Subscripts are never stated in the name; numerical prefixes (mono-, di-, tri-) are forbidden in ionic nomenclature.
The Criss-Cross Method for Ionic Formulas:
Step 1: Write the chemical symbols with the metallic cation on the left and the non-metallic anion on the right.
Step 2: Write their oxidation charges as superscripts ( and ).
Step 3: Criss-cross the numerical values only, dropping the positive/negative signs, to become subscripts for the opposite element.
Step 4: Simplify the subscript ratio to the lowest possible whole numbers. Subscripts of "1" are omitted entirely.
Example: Magnesium () + Oxygen ():
Example: Magnesium () + Fluorine ():
Standard Binary Ionic Formula and Nomenclature Directory:
Sodium Chloride:
Aluminum Chloride:
Cesium Fluoride:
Strontium Nitride:
Lithium Sulfide:
Calcium Chloride:
Sodium Bromide:
Beryllium Iodide:
Strontium Fluoride:
Aluminum Fluoride:
Potassium Nitride:
Sodium Sulfide:
Lithium Oxide:
Calcium Oxide:
Ionic Compounds Containing Multivalent Transition Metals
Multivalent Elements (Variable Combining Capacities):
Many transition metals and heavier post-transition metals possess more than one stable ionic charge state (combining capacity).
To avoid ambiguity, the Stock Roman Numeral System is used: a Roman numeral enclosed in parentheses is inserted immediately following the metal's name to specify its active positive charge.
Formulas Written from Roman Numeral Names:
Copper (II) oxide:
Mercury (I) oxide:
Gold (III) chloride:
Thallium (III) bromide:
Bismuth (V) oxide:
Terbium (III) oxide:
Uranium (VI) oxide:
Protactinium (III) bromide:
Cerium (III) oxide:
Arsenic (V) sulphide:
Manganese (III) oxide:
Vanadium (II) bromide:
Niobium (V) oxide:
Titanium (III) oxide:
Titanium (III) nitride:
Iron (II) oxide:
Cobalt (II) phosphide:
Tin (II) oxide:
Thulium (II) bromide:
Copper (II) bromide:
Reverse Criss-Cross Analysis to Determine Metal Oxidation State:
To deduce the metal's charge from a chemical formula, perform a reverse criss-cross, checking that the anion matches its fixed periodic charge. If the anion's subscript has been reduced, un-reduce the ratio proportionally.
: Chloride is , thus Tin is Tin (IV) chloride
: Bromide is , thus Bismuth is Bismuth (V) bromide
: Oxide is ; formula was reduced from , meaning Polonium is Polonium (IV) oxide
: Iodide is , thus Lead is Lead (II) iodide
: Oxide is ; reduced from , meaning Mercury is Mercury (II) oxide
: Chloride is , thus Mercury is Mercury (I) chloride
: Oxide is , thus Gold is Gold (III) oxide
: Chloride is , thus Iron is Iron (II) chloride
: Fluoride is , thus Palladium is Palladium (IV) fluoride
: Oxide is , thus Osmium is Osmium (III) oxide
: Bromide is , thus Molybdenum is Molybdenum (II) bromide
: Chloride is , thus Vanadium is Vanadium (V) chloride
: Oxide is , thus Manganese is Manganese (III) oxide
: Oxide is ; reduced from , meaning Cobalt is Cobalt (II) oxide
: Oxide is , thus Neptunium is Neptunium (III) oxide
: Oxide is , thus Vanadium is Vanadium (V) oxide
Discriminating Between Fixed-Valent and Multivalent Elements:
Fixed-valent metals (such as alkali metals, alkaline earths, Aluminum, Zinc) never use Roman numerals.
: Calcium bromide
: Potassium oxide
: Zinc fluoride
: Lithium oxide
: Sodium hydride
: Zirconium oxide
Multivalent elements must use Roman numerals:
: Iron (III) oxide
: Copper (I) chloride
: Nickel (III) oxide
: Gold (I) chloride
: Mercury (I) bromide
: Arsenic (V) chloride
: Europium (III) oxide
: Copper (II) nitride
: Cobalt (II) sulphide
Covalent Bonding, Diatomic Molecules, and Molecular Nomenclature
Principles of Covalent Bonding:
Formed when two or more non-metal atoms interact and mutually share pairs of valence electrons.
Substances joined by covalent bonds are known as molecular compounds.
A covalent bond comprises at least two shared electrons (one electron donated from each participating atom).
Diatomic Elements:
Certain non-metallic elements do not exist as isolated individual atoms in their standard natural states, but rather bond to an identical atom to form homonuclear diatomic molecules.
Mnemonic: "I Have No Bright Or Clever Friends"
Iodine gas/solid:
Hydrogen gas:
Nitrogen gas:
Bromine liquid:
Oxygen gas:
Chlorine gas:
Fluorine gas:
Prefix Rules for Molecular Nomenclature:
Molecular nomenclature uses Greek/Latin prefixes to state exactly how many atoms of each element exist in the compound.
Prefix System:
Naming Constraints:
Never attach the prefix "mono-" to the initial element name. (e.g., is carbon monoxide, not monocarbon monoxide).
The terminal vowel of a prefix is often dropped if paired with an element starting with an identical or conflicting vowel (e.g., monoxide, tetroxide, pentoxide).
Covalent formulas are never simplified or reduced. Reducing subscripts changes the substance's molecular identity (e.g., dihydrogen dioxide is ; reducing it to destroys its structural definition).
Molecular Formula and Name Directory:
Carbon monoxide:
Carbon tetrachloride:
Carbon dioxide:
Sulphur dioxide:
Sulphur trioxide:
Diphosphorous trioxide:
Carbon tetrafluoride:
Trisilicon dioxide:
Dihydrogen dioxide:
Selenium trioxide:
Boron trichloride:
Carbon tetraiodide:
Carbon tribromide:
Nitrogen trifluoride:
Sulphur dichloride:
Nitrogen dioxide:
Dinitrogen tetroxide:
Dinitrogen pentoxide:
Triphosphorus pentoxide:
Nitrogen triiodide:
Diphosphorus mononitride:
Nomenclature Decision Algorithm:
Identify the element classes: Metal + Non-Metal = Ionic; Non-Metal + Non-Metal = Covalent.
If Ionic:
Check if the metal is fixed-valent or multivalent.
Fixed-valent: Name metal + non-metal with "-ide".
Multivalent: Determine charge using reverse criss-cross; name metal + (Roman Numeral) + non-metal with "-ide".
If Covalent:
Identify subscripts; apply Latin prefixes directly without altering or reducing numbers. Avoid "mono-" on the first element.
Rules and Principles for Counting Atoms in Chemical Formulas
Core Atom-Counting Rules:
Rule 1 (Subscripts): A subscript refers strictly to the atom or parenthesis immediately preceding it. If an element lacks a subscript, it is understood to be .
In , there are atoms of Hydrogen and atom of Sulfur.
Rule 2 (Coefficients): A coefficient placed in front of a chemical formula applies to every atom in the entire compound. The coefficient multiplies all following subscripts.
In , there are atoms of Hydrogen and atoms of Sulfur.
Rule 3 (Parentheses): When a group of atoms is enclosed within parentheses, the subscript outside the closing bracket multiplies every atom inside the bracket.
In , there is atom of Barium, atoms of Oxygen, and atoms of Hydrogen.
Worked Atom Inventory Practice:
Magnesium Chloride ():
, . Total atoms = .
Aluminum Sulfide ():
, . Total atoms = .
Sodium Carbonate ():
, , . Total atoms = .
Calcium Phosphate ():
, , . Total atoms = .
Potassium Chromate ():
, , . Total atoms = .
Three units of Barium Chloride ():
, . Total atoms = .
Ammonium Acetate ():
, , , . Total atoms = .
Four units of Aluminum Carbonate ():
Total atoms = .
Lead (II) Nitrate ():
, , . Total atoms = .
Two units of Ammonium Dichromate ():
Total atoms = .
The Law of Conservation of Mass
Lavoisier's Fundamental Principle:
Formulated by Antoine Lavoisier: During an ordinary chemical reaction, the total mass of the starting substances (reactants) is always equal to the total mass of the ending substances (products).
Matter can neither be created nor destroyed in a chemical reaction; atoms are solely rearranged, broken apart, or combined into new configurations.

Conceptual Scenarios Demonstrating Conservation of Mass:
Dissolving sugar, water, and flavoring produces a solution weighing exactly .
Taking two identical balls of clay and reshaping one into a sphere and the other into an extended rope results in identical masses, as geometry has no bearing on mass.
Dissolving salt in water and boiling off all water leaves exactly dry salt residue in the container.
Adding vinegar to milk yields a curdled mixture weighing exactly .
Freezing liquid water produces an expanded ice cube that still weighs exactly , because physical expansion changes volume, not mass.
Chemical Equations: Formats, Symbols, and Balancing Strategies
Tiers of Chemical Equations:
Word Equation: Expresses reactants and products via full written names:
Skeleton Equation: Replaces names with correct chemical formulas without balancing the stoichiometry:
Balanced Equation: Incorporates stoichiometric coefficients in front of formulas to ensure equivalent counts of every atomic species on both sides of the reaction arrow:
Standard Syntactic Symbols:
Reactants appear on the left side; Products appear on the right side.
The plus sign () signifies "reacts with" on the reactant side and "and" on the product side.
The arrow () points from reactants to products, meaning "produces" or "yields".
State symbols specify physical conditions:
Solid: , e.g., ,
Liquid: , e.g.,
Gas: , e.g., ,
Aqueous solution (dissolved in water): , e.g.,

Systematic Step-by-Step Balancing Procedure:
Step 1: Write down the unbalanced skeleton equation.
Step 2: Draw boxes around all chemical formulas. Subscripts inside the boxes can never be altered under any circumstances.
Step 3: Construct an initial Element Inventory counting the atoms of each element on the reactant (before) and product (after) sides.
Step 4: Place integer coefficients in front of the boxes to balance mismatched elements, updating the element inventory after every change.
Step 5 (Odd/Even Discrepancies): When an element has an odd count on one side and an even count on the other (such as vs. ), determine the lowest common multiple (LCM = ) and apply multiplier coefficients ( and ) respectively.
Step-by-Step Walkthrough — Neutralization Reaction:
Skeleton:
Initial Inventory: , , , .
Add coefficient to :
Updated inventory: , , , .
Add coefficient to :
Final inventory: , , , . Balanced.
Comprehensive Balanced Equations Directory:
Energy Changes in Chemical Reactions: Exothermic vs. Endothermic Processes
Energy Conservation in Chemical Systems:
Energy cannot be created or destroyed; it is transformed during reactions.
Bond breaking always requires an input of energy, whereas bond formation releases energy.
Reactions are categorized thermodynamically based on whether net thermal energy is released or absorbed.
Exothermic Reactions:
Defined as reactions that release net energy into their surroundings, typically as thermal energy (heat) or light.
"Exo" translates to outside, and "therm" translates to heat.
The reaction container feels hot to the touch; surrounding temperature rises.
In chemical equations, energy is written explicitly on the products side (right side):
Practical examples: The combustion of hydrocarbons (propane, methane, gasoline), burning a match or candle flame.

Endothermic Reactions:
Defined as reactions that absorb net energy from their surroundings to progress.
"Endo" translates to in, and "therm" translates to heat.
The reaction absorbs ambient thermal energy, lowering the temperature of the surroundings; the reaction vessel feels cold.
In chemical equations, energy is written explicitly on the reactants side (left side):
Practical example: Chemical cold packs used for treating sports injuries. When the internal barrier ruptures, water and solid ammonium nitrate mix endothermically, absorbing heat from swollen tissues.

Classification of Chemical Reactions by Atomic Rearrangement
Synthesis Reactions (Addition Reactions):
Two or more simple chemical substances combine to form a single compound.
General equation:
Exemplar reactions:
Formation of water:
Combination of calcium oxide and water:
Formation of iron (II) oxide:
Reaction of copper with oxygen:
Reaction of iron with sulfur octamer:
Decomposition Reactions:
A single compound undergoes breakdown into two or more simpler elements or compounds.
General equation:
Exemplar reactions:
Electrolytic decomposition of water:
Breakdown of calcium hydroxide:
Breakdown of hydrogen peroxide:
Thermal decomposition of mercury (II) oxide:
Decomposition of table salt:
Single Replacement Reactions:
An unbonded single element replaces an element in an existing compound, releasing a new uncombined element.
General equation:
Exemplar reactions:
Halogen replacement:
The Thermite Reaction (the most exothermic single replacement reaction known; utilized by industrial welders to melt and fuse railway steel):
Carbon reduction of iron ore (blast furnace smelting):
Iron displacing copper from copper sulfate:
Chromium displacing tin:
Iron reacting with steam:
Double Replacement Reactions:
Two ionic compounds exchange their respective partner ions (cations swap with cations; anions swap with anions) to form two new compounds.
General equation:
Exemplar reactions:
Precipitation of lead (II) iodide:
Precipitation of silver bromide:
Iron (II) chloride reacting with potassium sulfide:
Arsenic chloride and hydrogen sulfide:
Hydrogen sulfide reacting with potassium hydroxide:
Combustion Reactions:
A hydrocarbon (or carbon/hydrogen/oxygen compound) burns rapidly in the presence of excess oxygen gas, yielding carbon dioxide, water vapor, and heat.
General equation:
Exemplar reactions:
Combustion of methane:
Combustion of propane:
Cellular respiration / combustion of glucose:
Properties, Nomenclature, and Real-World Examples of Acids and Bases
Characteristic Properties of Acids:
Change blue litmus paper to red.
Have a distinctly sour taste.
React with active metals to produce hydrogen gas ().
Act as strong electrolytes, conducting electricity when dissolved in water due to ionization.
Exhibit a pH value strictly less than ().
Characteristic Properties of Bases (Alkaline Substances):
Change red litmus paper to blue.
Have a distinctly bitter taste.
Feel slippery or soapy to the touch.
Act as electrolytes, conducting electricity when dissolved in water.
Exhibit a pH value strictly greater than ().
Widely formulated into commercial household cleaning reagents.
Reference Catalog of Acids:
Hydrochloric Acid (): Naturally occurring gastric acid in stomach digestion; used for metal cleaning and masonry.
Sulphuric Acid (): Industrial chemical used as lead-acid car battery electrolyte.
Carbonic Acid (): Formed by dissolved carbon dioxide in carbonated sodas and beverages.
Acetic Acid (): The active acidic component in commercial vinegar.
Reference Catalog of Bases:
Sodium Hydroxide (): Caustic soda / lye; used as active agent in heavy-duty drain cleaners (e.g., Drano).
Potassium Hydroxide (): Caustic potash; formulated with sodium hydroxide in lye soaps and industrial cleaners.
Magnesium Hydroxide (): Known as milk of magnesia; active component in antacids (e.g., Tums) to relieve acid reflux.
Sodium Bicarbonate (): Commonly known as baking soda; utilized in baking, deodorizing, and mild neutralization.
Neutralization Reactions:
A specialized subset of double replacement reactions occurring when an acid and a base react together quantitatively.
General word equation:
Exemplar neutralization reaction:
The pH Scale and Chemical Indicators
The pH Metric:
The designation "pH" stands for the "potential of hydrogen" ().
Quantifies the relative acidity or basicity of an aqueous solution on a logarithmic scale spanning from to :
: Perfectly Neutral (neither acidic nor basic).
( to ): Acidic solution (acidity intensifies as pH approaches ).
( to ): Basic / Alkaline solution (alkalinity intensifies as pH approaches ).

Systematic pH Values for Common Household and Biological Substances:
: Battery acid, concentrated hydrochloric acid ()
: Lemon juice, vinegar
: Grapefruit juice, carbonated soda, tomato juice
: Black coffee
: Cow's milk, human urine, human saliva
: Pure distilled water
: Human blood
: Natural sea water
: Baking soda solution ()
: Household ammonia cleaning solution
: Chlorine bleaches, oven cleaner, caustic lye
: Industrial liquid drain cleaner ()
Chemical Indicators Behavior Matrix:
An indicator is a chemical substance that exhibits distinct, identifiable color shifts when exposed to acidic versus basic solutions.
Red Litmus Paper: Remains red in acidic media; turns blue in basic media.
Blue Litmus Paper: Turns red in acidic media; remains blue in basic media.
Bromothymol Blue: Converts to yellow in acidic media; stays blue in basic media.
Phenolphthalein: Stays clear/colorless in acidic media; turns bright hot pink (magenta) in basic media.

Laboratory Chemical Safety and Unknown Identification Scenario:
If two identical unlabelled laboratory bottles contain liquid drain cleaner and vinegar respectively:
Tasting or smelling the bottles is strictly forbidden. Commercial drain cleaners contain concentrated sodium hydroxide (), which is highly corrosive and immediately saponifies skin proteins, producing severe chemical burns. Inhaling its vapors causes acute respiratory tract damage.
Identification is achieved safely using indicator paper: Dip red and blue litmus strips into small samples taken from each bottle. The sample that turns blue litmus red is vinegar (). The sample that turns red litmus blue is liquid drain cleaner ().