GMAW - Welding Mig
I. What is it/How does it work?/Where is it used?/Pros and cons
Stands for Gas Metal Arc Welding
Also called Mig (Metal Inert Gas)
A. Process
An Electric Arc forms between an electrode wire and a metal workpiece, heating the metal and causing them to melt
Process uses external gas for shielding molten weld pool (puddle)
Uses polarity DC+
B. Environment
MIG is used in the following environments
Shop
Structural environments indoors
High pace assembly line welding
Can be used for thin materials for automotive
Ferrous or non ferrous (Steels and aluminum metals)
C. Advantages to using Mig
No slag
No electrode change or variety of metal types
High Speed chipping
Variety of metal thickness (sheet metal to 2” plate)
Lower operator skill
All position welding
Variety of metal types
D. Disadvantages
More parts that need replacement and inspection
More expensive than SMAW
Not as portable (gas bottle)
Not good for outdoor welding
Needs a clean surface to weld on
Spatter
II.Joints Made with GMAW
A) What are Joint Welds
Joint Welds are normally single passed welds that could be multi passed for reinforcement
Joint refers to the position the metal is in
B) Types of Joint welds
There are 5 main types of Joint welds:
Butt welds (Butt welds are associated with groove welds V, Bevel, U, flares)
Lap welds (Lap joints use fillet welds)
Tee welds (Tee joints use fillet welds)
Corner welds (Corner Joints use fillet welds))
Edge welds (Edge Joints use surfacing welds or groove welds
III. Characteristics of the fillet weld
A) Leg
Distance from the root to the toe
B) Root
Bottom of the weld intersecting the base metal surface
C) Face
The surface of the weld
D) Toes
There are two edges of the weld where they touch the base metal
E) Throat
The distance from root of weld to face of weld