Comprehensive Osteology Study Guide
General Osteology
Osteology Definition: Osteology is the skeleton and bone tissue.
Functions of the Skeleton:
Provides a scaffolding or structural base over which other tissues are placed.
Enables physical body movement.
Provides mechanical protection to internal organs.
Serves as the site for haematopoiesis (blood cell production).
Divisions of the Human Skeleton:
Axial Skeleton (
skeleton axiale/ осевой скелет): Consists of the bones of the head (cranium), neck, and trunk (vertebral column,sternum,ribs).Appendicular Skeleton (
skeleton appendiculare/ добавочный скелет): Consists of the bones of the upper and lower limbs.
The Vertebral Column (Columna Vertebralis)
General Overview:
Also known as the spine, spinal column, or backbone.
Functions as the central axis of the body, supporting body weight and transmitting it to the ground via the lower limbs.
Consists of vertebrae divided into five regional categories:
Cervical vertebrae ()
Thoracic vertebrae ()
Lumbar vertebrae ()
Sacral vertebrae (), fused as the sacrum
Coccygeal vertebrae (), fused as the coccyx

Parts of a Typical Vertebra
Vertebral Body (
corpus vertebrae/ тело позвонка):Located anteriorly.
Shaped like a short cylinder, rounded from side to side.
Features flat upper and lower surfaces attached to adjoining vertebrae via intervertebral discs.
Vertebral Arch (
arcus vertebrae/ дуга позвонка):Located posteriorly.
Attached to the body by the right and left pedicles (
pediculus arcus vertebrae/ ножка дуги позвонка).The posterior portion of the arch is formed by the laminae (
lamina arcus vertebrae/ пластинка дуги позвонка).
Vertebral Foramen (
foramen vertebrale/ позвоночное отверстие):Bounded anteriorly by the posterior aspect of the body and posteriorly by the vertebral arch.
Successive vertebral foramina align to form the vertebral canal (
canalis vertebralis/ позвоночный канал), which runs the length of the column and lodges the spinal cord.
Processes of the Vertebral Arch (Seven processes per typical vertebra):
Spinous Process / Spine (
processus spinosus/ остистый отросток): Projects backward (and usually downward) from the posterior midline of the arch.Transverse Processes (
processus transversus/ поперечный отросток): Project laterally (and somewhat backward) from the lateral aspects of the arch.Articular Processes (
processus articularis superior, inferior/ верхний, нижний суставной отросток):Two superior and two inferior processes project upward and downward from the lateral sides of the arch.
Each process features a superior or inferior articular facet (
facies articularis superior, inferior/ верхняя, нижняя суставная поверхность).The superior facet of one vertebra articulates with the inferior facet of the vertebra directly above it.
Vertebral Notches and Intervertebral Foramen:
Pedicles are narrower than the body and attach near its upper border.
Inferior Vertebral Notch (
incisura vertebralis inferior/ нижняя позвоночная вырезка): Large notch situated below the pedicle.Superior Vertebral Notch (
incisura vertebralis superior/ верхняя позвоночная вырезка): Smaller notch situated above the pedicle.The superior and inferior notches of adjoining vertebrae combine to form the intervertebral foramen (
foramen intervertebrale/ межпозвоночное отверстие), which transmits spinal nerves emerging from the spinal cord.
Side Determination of a Vertebra
The vertebral body lies anteriorly.
The inferior vertebral notch is larger than the superior vertebral notch.
Regional Features of Cervical Vertebrae (Vertebrae Cervicales)
Foramen Transversarium (
foramen transversarium/ поперечное отверстие):Pierces each transverse process.
Transmits the vertebral artery.
Transverse Process Tubercles: Each transverse process terminates in an anterior tubercle (
tuberculum anterius/ передний бугорок) and a posterior tubercle (tuberculum posterius/ задний бугорок).Carotid Tubercle (
tuberculum caroticum/ сонный бугорок): The prominent anterior tubercle of the sixth cervical vertebra (), against which the common carotid artery can be compressed.Groove for Spinal Nerve (
sulcus nervi spinalis/ борозда спинномозгового нерва): Positioned on the superior surface of the transverse process.Spinous Process: Short and bifid.

The First Cervical Vertebra (Atlas - C1)
Ring-shaped bone with no body and no spinous process.
Consists of an anterior arch (
arcus anterior atlantis), a posterior arch (arcus posterior atlantis), and paired lateral masses (massa lateralis atlantis).Anterior Arch:
Bears a median anterior tubercle (
tuberculum anterius/ передний бугорок) on its anterior aspect.Posterior surface features an oval facet for dens (
fovea dentis/ ямка зуба), articulating with the dens of the axis () to form the median atlanto-axial joint.
Posterior Arch:
Bears a median posterior tubercle (
tuberculum posterius/ задний бугорок) posteriorly.Upper surface features a groove for the vertebral artery (
sulcus arteriae vertebralis/ борозда позвоночной артерии).
Lateral Masses:
Superior Articular Surface (
facies articularis superior/ верхняя суставная поверхность): Elongated, concave facet articulating with the occipital condyle to form the atlanto-occipital joint.Inferior Articular Surface (
facies articularis inferior/ нижняя суставная поверхность): Circular, relatively flat facet articulating with the axis to form the lateral atlanto-axial joint.

The Second Cervical Vertebra (Axis - C2)
Features the dens or odontoid process (
dens axis/ зуб), projecting vertically upward from the body, ending at an apex (apex dentis/ верхушка зуба).Anterior Articular Facet (
facies articularis anterior/ передняя суставная поверхность): Located on the anterior aspect of the dens for articulation with the anterior arch of the atlas.Posterior Articular Facet (
facies articularis posterior/ задняя суставная поверхность): Located on the posterior aspect of the dens for articulation with the transverse ligament of the atlas.
The Seventh Cervical Vertebra (Vertebra Prominens - C7)
Characterized by a long, thick, non-bifid spinous process that forms a prominent surface landmark at the base of the neck, giving the vertebra its name (
vertebra prominens/ выступающий позвонок).

Regional Features of Thoracic Vertebrae (Vertebrae Thoracicae)
Costal Demifacets on Body:
Superior Costal Facet (
fovea costalis superior/ верхняя реберная ямка): Larger, situated on the upper border near the pedicle; articulates with the head of the numerically corresponding rib.Inferior Costal Facet (
fovea costalis inferior/ нижняя реберная ямка): Situated on the lower border anterior to the inferior vertebral notch; articulates with the head of the rib below.
Transverse Processes: Large, directed laterally and backward. Anterior surface bears a transverse costal facet (
fovea costalis processus transversi/ реберная ямка поперечного отростка) near the tip for articulation with the rib tubercle.Spinous Process: Long, pointed, and directed downward and backward.
Atypical Thoracic Vertebrae Variations:
First Thoracic Vertebra (): Possesses a complete superior costal facet for the first rib head and an inferior demifacet for the second rib.
Tenth Thoracic Vertebra (): Body bears a single superior costal facet (no inferior demifacet).
Eleventh and Twelfth Thoracic Vertebrae (): Bodies bear single, complete costal facets on each side. Transverse processes are reduced and lack articular facets.
Regional Features of Lumbar Vertebrae (Vertebrae Lumbales)
Lack foramina transversaria and costal facets.
Body is massive and kidney-shaped.
Spinous process is a thick, vertical quadrilateral plate directed horizontally backward.
Transverse process represents a costal element (homologous to ribs).
Accessory Process (
processus accesorius/ добавочный отросток): A small elevation located on the posteroinferior aspect of the base of each transverse process, representing the true morphological transverse process.

The Sacrum (Os Sacrum)
A large, flattened, triangular bone formed by the fusion of five sacral vertebrae ().
Forms the posterior wall of the bony pelvis, articulating laterally with the hip bones at the sacro-iliac joints to transmit body weight to the pelvic girdle.
Base of Sacrum (
basis ossis sacri/ основание крестца):Superior massive end featuring superior articular processes (
processus articularis superior), articulating with to form the lumbosacral joint.Promontory (
promontorium/ мыс): Prominent anterior projecting margin of the body.
Apex of Sacrum (
apex ossis sacri/ верхушка крестца): Inferior end bearing an oval facet for articulation with the coccyx.Pelvic Surface (
facies pelvica/ тазовая поверхность):Smooth and concave.
Transverse Ridges (
lineae transversae/ поперечные линии): Four horizontal lines marking the fusion sites of sacral bodies.Anterior Sacral Foramina (
foramina sacralia anteriora/ передние крестцовые отверстия): Four pairs of openings at the lateral ends of the transverse ridges communicating with the sacral canal (canalis sacralis).

Dorsal Surface (
facies dorsalis/ дорсальная поверхность):Irregular and convex.
Median Sacral Crest (
crista sacralis mediana/ срединный крестцовый гребень): Midline ridge representing fused spinous processes of upper four sacral vertebrae.Intermediate Sacral Crest (
crista sacralis medialis/ медиальный крестцовый гребень): Located lateral to median crest; formed by fused articular processes.Lateral Sacral Crest (
crista sacralis lateralis/ латеральный крестцовый гребень): Located lateral to intermediate crest; formed by fused transverse processes.Posterior Sacral Foramina (
foramina sacralia posteriora/ задние крестцовые отверстия): Four pairs of openings between intermediate and lateral crests communicating with the sacral canal.Lateral Part (
pars lateralis/ латеральная часть): Bone mass lateral to foramina, presenting the auricular surface (facies auricularis/ ушковидная поверхность) for articulation with the ilium and the sacral tuberosity (tuberositas ossis sacri/ бугристость крестца).
Sacral Cornua and Hiatus:
Sacral Cornua (
cornu sacrale/ крестцовый рог): Downward-projecting processes formed by free inferior articular processes of .Sacral Hiatus (
hiatus sacralis/ крестцовая щель): Inferior opening of the sacral canal bounded laterally by the sacral cornua.
Sacral Canal (
canalis sacralis/ крестцовый канал): Formed by alignment of sacral vertebral foramina, opening inferiorly at the sacral hiatus.
The Coccyx (Os Coccygis)
Small triangular bone formed by the fusion of rudimentary coccygeal vertebrae.
Base formed by the upper surface of the first coccygeal body, articulating with the sacral apex.
Coccygeal Cornua (
cornu coccygeum/ копчиковый рог): Upward-projecting rudimentary articular processes of the first coccygeal vertebra articulating with sacral cornua.
The Thoracic Cage: Ribs and Sternum

The Ribs (Costae)
pairs of curved bony arches bounding the thoracic cavity, separated by intercostal spaces (
spatium intercostale/ межреберье).Classification of Ribs:
True Ribs (
costae verae/ истинные рёбра): Ribs ; attach directly to the sternum via their costal cartilages.False Ribs (
costae spuriae/ ложные рёбра): Ribs ; costal cartilages of ribs articulate indirectly by joining the cartilage of the rib immediately above.Floating Ribs (
costae fluctuantes/ колеблющиеся рёбра): Ribs (sub-group of false ribs); anterior ends are free and unattached.
Structure of a Typical Rib
Anterior End: Oval and concave depression articulating with its costal cartilage.
Posterior End:
Head (
caput costae/ головка ребра): Bears an articular surface (facies articularis capitis costae) divided by a crest (crista capitis costae). The larger lower facet articulates with the numerically corresponding vertebra; the upper facet articulates with the upper adjacent vertebra.Neck (
collum costae/ шейка ребра): Constricted segment between head and shaft.Tubercle (
tuberculum costae/ бугорок ребра): Located at junction of neck and shaft; medial articular surface forms costotransverse joint with corresponding transverse process.
Shaft (
corpus costae/ тело ребра):Flattened with outer/inner surfaces and upper (rounded) / lower (thin) borders.
Convex outward, bent sharply at the angle (
angulus costae/ угол ребра) located approximately lateral to the tubercle.Costal Groove (
sulcus costae/ борозда ребра): Runs along lower border of inner surface; lodges posterior intercostal vessels and intercostal nerve.
Side Determination of Rib:
Anterior end features a concave depression; posterior end bears head, neck, and tubercle.
Shaft convexity faces outward, with costal groove situated along lower border of inner surface.
Characteristics of Atypical Ribs
First Rib:
Shortest, broadest, and most sharply curved rib; shaft is not twisted.
Flattened vertically with superior and inferior surfaces, inner and outer borders.
Superior surface features:
Groove for subclavian vein (
sulcus venae subclaviae/ борозда подключичной вены) anteriorly.Groove for subclavian artery (
sulcus arteriae subclaviae/ борозда подключичной артерии) posteriorly.Scalene tubercle (
tuberculum musculi scaleni anterioris/ бугорок передней лестничной мышцы): Ridge on inner border separating subclavian grooves.Head is small/rounded; tubercle coincides directly with angle.
Side determination: Anterior end thick/pitted; outer border convex; upper surface bears scalene tubercle.
Tenth Rib: Bears a single articular facet on head for body.
Eleventh and Twelfth Ribs: Pointed anterior ends; lack necks and tubercles.

The Sternum
Flat, elongated median anterior thoracic bone comprising three parts: manubrium, body, and xiphoid process.
Manubrium (
manubrium sterni/ рукоятка грудины):Thickest and strongest portion.
Formed at an anterior angle with the body called the sternal angle (
angulus sterni/ угол грудины).Jugular Notch (
incisura jugularis/ яремная вырезка): Central median notch on superior border.Clavicular Notch (
incisura clavicularis/ ключичная вырезка): Flanks jugular notch, forming sternoclavicular joint with clavicle.Costal Notches (
incisurae costales/ реберные вырезки): Lateral notches for 1st costal cartilage and upper half of 2nd costal cartilage.
Body of Sternum (
corpus sterni/ тело грудины):Anterior surface marked by three transverse ridges.
Lateral borders bear costal notches for lower half of 2nd, 3rd to 6th, and upper half of 7th costal cartilages.
Xiphoid Process (
processus xiphoideus/ мечевидный отросток):Inferior tapering part bearing costal notch for lower portion of 7th costal cartilage.
Applied Anatomy:
Bone marrow aspiration for diagnostic examination is commonly performed via sternal (manubrial) puncture.
Xiphoid process may present morphological variations, such as being bifid or perforated.
Bones of the Upper Limb (Ossa Membri Superioris)
Subdivisions of Upper Limb Skeleton:
Pectoral/Shoulder Girdle (
cingulum pectorale): Clavicle and scapula.Free Part of Upper Limb (
pars libera membri superioris):Arm: Humerus.
Forearm: Radius (lateral) and Ulna (medial).
Wrist: carpal bones.
Palm: metacarpal bones.
Digits: phalanges (proximal, middle, distal; thumb has two).

The Clavicle (Clavicula)
Long bone positioned horizontally at root of neck.
Sternal End (
extremitas sternalis/ грудинный конец): Quadrangular medial end bearing sternal facet (facies articularis sternalis) articulating with manubrium.Acromial End (
extremitas acromialis/ акромиальный конец): Flattened lateral end bearing acromial facet (facies articularis acromialis) articulating with acromion.Shaft of Clavicle (
corpus claviculae/ тело ключицы):Medial Two-Thirds: Convex forward.
Lateral One-Third: Concave forward; inferior surface bears conoid tubercle (
tuberculum conoideum/ конусовидный бугорок) and trapezoid line (linea trapezoidea/ трапецевидная линия) for coracoclavicular ligament attachment.
Side Determination:
Medial end is large/quadrangular; lateral end is flat.
Shaft curvature is convex forward in medial and concave forward in lateral .
Rough surface faces inferiorly.
Applied Anatomy: Clavicle is commonly fractured by falls on an outstretched hand, typically occurring at junction of medial and lateral (weakest point); weight of limb displaces lateral fragment downward.

The Scapula
Large, flat, triangular bone on postero-lateral thoracic wall.
Surfaces:
Costal Surface (
facies costalis/ ребёрная поверхность): Concave anterior surface forming subscapular fossa (fossa subscapularis/ подлопаточная ямка).Posterior Surface (
facies posterior/ задняя поверхность): Divided by spine of scapula (spina scapulae/ ость лопатки) into smaller supraspinous fossa (fossa supraspinata/ надостная ямка) and larger infraspinous fossa (fossa infraspinata/ подостная ямка).
Processes:
Spine of Scapula: Triangular plate projecting from posterior surface.
Acromion (
acromion/ акромион): Lateral flattened continuation of scapular spine; medial border features clavicular facet (facies articularis clavicularis) for acromioclavicular joint.Coracoid Process (
processus coracoideus/ клювовидный отросток): Hook-like process projecting anterolaterally from superior border.
Borders and Angles:
Superior Border (
margo superior/ верхний край): Thin and short; features suprascapular notch (incisura scapulae/ вырезка лопатки) medial to coracoid process.Lateral Angle (
angulus lateralis/ латеральный угол): Broad end bearing glenoid cavity (cavitas glenoidalis/ суставная впадина) for humerus head; bounded by supraglenoid tubercle (tuberculum supraglenoidale) above and infraglenoid tubercle (tuberculum infraglenoidale) below; neck of scapula (collum scapulae) is constriction medial to cavity.
Side Determination: Glenoid cavity points laterally; spine on convex surface faces posteriorly; thick lateral border extends from glenoid to inferior angle.
Applied Anatomy: Paralysis of serratus anterior muscle causes "winging" of scapula, preventing normal shoulder abduction.


The Humerus
Long bone of arm.
Upper End:
Head (
caput humeri/ головка плечевой кости): Smooth hemispherical process facing medially, backward, and upward to articulate with glenoid cavity.Anatomical Neck (
collum anatomicum/ анатомическая шейка): Groove circumscribing margin of head.Lesser Tubercle (
tuberculum minus/ малый бугорок): Anterior prominence on upper end.Greater Tubercle (
tuberculum majus/ большой бугорок): Lateral prominent border of upper end.Intertubercular Sulcus (
sulcus intertubercularis/ межбугорковая борозда): Longitudinal groove between tubercles; bounded by medial lip (crista tuberculi minoris) and lateral lip (crista tuberculi majoris).Surgical Neck (
collum chirurgicum/ хирургическая шейка): Constriction immediately distal to tubercles connecting upper end to shaft.
Shaft (
corpus humeri/ тело плечевой кости):Borders: Lateral (
margo lateralis) ending in lateral supracondylar ridge; Medial (margo medialis) ending in medial supracondylar ridge; Anterior (margo anterior).Surfaces: Anterolateral (
facies anterolateralis) bearing V-shaped deltoid tuberosity (tuberositas deltoidea); Anteromedial (facies anteromedialis); Posterior (facies posterior) crossed obliquely by radial groove (sulcus nervi radialis/ борозда лучевого нерва).
Lower End (Condyle -
condylus humeri):Articular Elements:
Capitulum (
capitulum humeri/ головка мыщелка): Lateral rounded eminence articulating with radius head.Trochlea (
trochlea humeri/ блок): Medial pulley-shaped surface articulating with trochlear notch of ulna.Non-articular Elements:
Coronoid Fossa (
fossa coronoidea/ венечная ямка): Anterior depression above trochlea for ulnar coronoid process during flexion.Radial Fossa (
fossa radialis/ лучевая ямка): Anterior depression above capitulum for radius head during flexion.Olecranon Fossa (
fossa olecrani/ ямка локтевого отростка): Posterior deep cavity above trochlea for ulnar olecranon process during extension.Medial Epicondyle (
epicondylus medialis/ медиальный надмыщелок): Prominent medial projection; posterior aspect bears groove for ulnar nerve (sulcus nervi ulnaris).Lateral Epicondyle (
epicondylus lateralis/ латеральный надмыщелок): Prominent lateral projection.
Side Determination: Smooth rounded head faces medially/backward; capitulum faces forward/laterally.
Applied Anatomy:
Common fracture sites: Surgical neck, shaft mid-section, and supracondylar region.
Nerve relations to fracture sites: Axillary nerve at surgical neck, radial nerve at radial groove, and ulnar nerve behind medial epicondyle.

The Radius
Lateral bone of forearm.
Upper End:
Head (
caput radii/ головка лучевой кости): Disc-shaped head with superior concave facet (fovea articularis) for capitulum.Articular Circumference (
circumferentia articularis/ суставная окружность): Smooth rim articulating with ulnar radial notch and annular ligament at superior radioulnar joint.Neck (
collum radii/ шейка лучевой кости): Constriction below head.Radial Tuberosity (
tuberositas radii/ бугристость лучевой кости): Medial tuberosity distal to neck.
Shaft (
corpus radii/ тело лучевой кости):Three borders: Anterior (
margo anterior), Posterior (margo posterior), Interosseous (margo interosseus- sharpest medial crest).Three surfaces: Anterior (
facies anterior- smooth), Posterior (facies posterior- rough), Lateral (facies lateralis).
Lower End:
Broadest portion of bone.
Posterior Surface: Bears grooves for extensor muscle tendons (
sulci tendinum musculorum extensorum).Medial Surface: Features ulnar notch (
incisura ulnaris/ локтевая вырезка) for ulnar head.Lateral Surface: Prolonged downward into radial styloid process (
processus styloideus radii).Inferior Surface: Carpal articular surface (
facies articularis carpalis) articulating with scaphoid and lunate bones in wrist joint.
Side Determination: Disc-shaped head proximal, expanded styloid process distal; interosseous border medially; smooth surface anteriorly.
Applied Anatomy:
Colles' fracture: Fracture occurring approximately proximal to distal end of radius due to fall on outstretched hand; distal fragment displaced backward and upward.
Subluxation of radius head: Sudden forceful pull on a child's hand dislodging head from annular ligament.
Radio-ulnar synostosis and rare congenital radius absence (frequently associated with absent thumb).

The Ulna
Medial stabilizing bone of forearm.
Upper End:
Olecranon (
olecranon/ локтевой отросток): Upward-projecting posterior process.Coronoid Process (
processus coronoideus/ венечный отросток): Forward-projecting anterior process; lateral aspect features radial notch (incisura radialis) for radius head; lower anterior surface bears ulnar tuberosity (tuberositas ulnae).Trochlear Notch (
incisura trochlearis/ блоковидная вырезка): C-shaped concavity formed by olecranon and coronoid process articulating with humerus trochlea.
Shaft:
Three borders: Lateral Interosseous (
margo interosseus- sharp crest), Anterior (margo anterior), Posterior (margo posterior).Three surfaces: Anterior (
facies anterior- smooth), Medial (facies medialis), Posterior (facies posterior- rough).
Lower End:
Head (
caput ulnae/ головка локтевой кости): Distal end featuring articular circumference (circumferentia articularis) articulating with radius ulnar notch at inferior radioulnar joint (separated from wrist joint by articular disc).Ulnar Styloid Process (
processus styloideus ulnae/ шиловидный отросток локтевой кости): Downward projection on posteromedial side.
Side Determination: Hook-like trochlear notch proximal with concavity forward; sharp interosseous crest lateral.
Applied Anatomy:
Stabilizing forearm axis allowing radius rotation (pronation/supination).
Elbow dislocation produced by fall on outstretched hand with elbow flexed; olecranon shifts posteriorly.
Olecranon fracture caused by direct fall onto point of elbow.
The Carpal Bones (Ossa Carpi)
Eight short bones arranged in proximal and distal rows:
Proximal Row (lateral to medial): Scaphoid (
os scaphoideum, bearing tubercletuberculum ossis scaphoidei), Lunate (os lunatum), Triquetral (os triquetrum), Pisiform (os pisiforme).Distal Row (lateral to medial): Trapezium (
os trapezium, bearing tubercletuberculum ossis trapezii), Trapezoid (os trapezoideum), Capitate (os capitatum), Hamate (os hamatum, bearing hookhamulus ossis hamati).
Carpal Groove (
sulcus carpi/ борозда запястья): Concavity bounded laterally by scaphoid/trapezium tubercles and medially by pisiform/hamate hook.Applied Anatomy:
Scaphoid fracture: Most common carpal injury caused by fall on outstretched hand; high risk of non-union and avascular necrosis.
Lunate dislocation: Anterior displacement caused by fall on dorsiflexed hand, leading to carpal tunnel syndrome.
The Metacarpals (Ossa Metacarpi)
Five miniature long bones numbered lateral to medial.
Structure per bone: Distal rounded head (
caput), shaft (corpus, concave on palmar side), proximal expanded base (basis).Metacarpal (thumb) is shortest and stoutest; base features concavoconvex facet for trapezium.
Applied Anatomy: Base fracture of metacarpal forces thumb into semiflexed position without opposition capability.
The Phalanges (Ossa Digitorum)
Fourteen phalanges in each hand: Three per finger (proximal, middle, distal) and two in thumb (proximal, distal).
Parts: Proximal base (
basis), shaft (corpus), distal head (caput).Distal phalanges terminate in a rough horseshoe-shaped distal tuberosity (
tuberositas phalangis distalis).
Bones of the Lower Limb (Ossa Membri Inferioris)
Subdivisions of Lower Limb Skeleton:
Pelvic Girdle (
cingulum pelvicum): Hip bone (os coxae).Free Part of Lower Limb (
pars libera membri inferioris):Thigh: Femur.
Knee Joint: Patella (sesamoid bone).
Leg: Tibia (medial) and Fibula (lateral).
Foot: tarsal bones, metatarsal bones, phalanges.


The Hip Bone (Os Coxae)
Large irregular bone formed by fusion of ilium, ischium, and pubis at the acetabulum.
The Ilium (Os Ilium)
Upper expanded part of hip bone comprising body (
corpus ossis ilii) fused at acetabulum and wing/ala (ala ossis ilii).Iliac Crest (
crista iliaca/ гребень подвздошной кости): Upper border of ala; features inner lip (labium internum), outer lip (labium externum), and intermediate line (linea intermedia).Anterior Superior Iliac Spine (ASIS) (
spina iliaca anterior superior): Anterior crest projection.Anterior Inferior Iliac Spine (AIIS) (
spina iliaca anterior inferior): Projection below ASIS.Posterior Superior Iliac Spine (PSIS) (
spina iliaca posterior superior): Posterior crest projection.Posterior Inferior Iliac Spine (PIIS) (
spina iliaca posterior inferior): Projection below PSIS.
Inner Surface: Features smooth concave iliac fossa (
fossa iliaca) anteriorly; iliac tuberosity (tuberositas iliaca) and auricular surface (facies auricularis, articulating with sacrum) posteriorly.Arcuate Line (
linea arcuata/ дугообразная линия): Ridge separating iliac fossa from auricular surface; extends to iliopubic eminence (eminentia iliopubica).Gluteal Lines (Outer surface of ala):
Anterior Gluteal Line (
linea glutea anterior): Begins behind ASIS, curves to greater sciatic notch.Posterior Gluteal Line (
linea glutea posterior): Vertical line from crest to PIIS.Inferior Gluteal Line (
linea glutea inferior): Horizontal line above AIIS ending near greater sciatic notch.
The Ischium (Ischium)
Comprises body (
corpus ossis ischii) and ramus (ramus ossis ischii).Ischial Tuberosity (
tuber ischiadicum/ седалищный бугор): Thick posteroinferior body impression.Ischial Spine (
spina ischiadica/ седалищная ость): Posterior projection separating greater sciatic notch (incisura ischiadica major) above from lesser sciatic notch (incisura ischiadica minor) below.
The Pubis (Os Pubis)
Comprises body (
corpus ossis pubis), superior ramus (ramus superior ossis pubis), and inferior ramus (ramus inferior ossis pubis).Symphyseal Surface (
facies symphysialis): Medial articular surface for pubic symphysis.Pecten Pubis (
pecten ossis pubis/ гребень лобковой кости): Ridge extending from iliopubic eminence to pubic tubercle (tuberculum pubicum); combines with arcuate line to form terminal line (linea terminalis/ пограничная линия) separating greater and lesser pelvises.Obturator Groove (
sulcus obturatorius/crista obturatoria): Runs along inferior aspect of superior ramus.
Acetabulum and Obturator Foramen
Acetabulum (
acetabulum/ вертлужная впадина): Deep lateral hemispherical socket formed by ilium, ischium, and pubis; features lunate articular surface (facies lunata), non-articular acetabular fossa (fossa acetabuli), and inferior acetabular notch (incisura acetabuli).Obturator Foramen (
foramen obturatum/ запирательное отверстие): Large aperture bounded by pubic and ischial rami/bodies, closed by fibrous obturator membrane (except for upper obturator canal).Side Determination: Acetabulum faces laterally; ilium expanded superiorly; obturator foramen positioned inferiorly with pubis anterior and ischium posterior.

The Femur
Longest and strongest long bone of body.
Upper End:
Head (
caput femoris/ головка бедренной кости): Spherical structure facing medially/upward; features central pit (fovea capitis femoris) for ligamentum teres.Neck (
collum femoris/ шейка бедренной кости): Connects head to shaft at an angle; bounded anteriorly by intertrochanteric line (linea intertrochanterica) and posteriorly by intertrochanteric crest (crista intertrochanterica).Greater Trochanter (
trochanter major/ большой вертел): Large quadrangular lateral projection; medial aspect presents trochanteric fossa (fossa trochanterica).Lesser Trochanter (
trochanter minor/ малый вертел): Conical postero-medial projection.
Shaft (
corpus femoris/ тело бедренной кости):Cylindrical, convex forward.
Linea Aspera (
linea aspera/ шероховатая линия): Posterior longitudinal ridge with medial lip (labium mediale) and lateral lip (labium laterale).Upper divergence: Medial lip forms pectineal line (
linea pectinea); lateral lip forms gluteal tuberosity (tuberositas glutea).Lower divergence: Lips enclose triangular popliteal surface (
facies poplitea).
Lower End:
Expanded into medial condyle (
condylus medialis) and lateral condyle (condylus lateralis), bearing medial/lateral epicondyles (epicondylus medialis, lateralis).United anteriorly as patellar surface (
facies patellaris); separated posteriorly by deep intercondylar fossa (fossa intercondylaris).
Side Determination: Head proximal and faces medially; shaft convexity anterior; linea aspera posterior.
Applied Anatomy: Forced medial rotation injuries result in:
Shaft spiral fracture (<16 years of age).
Medial meniscus tear ( years of age).
Pott's fracture ( years of age).
Femoral neck fracture (>60 years of age).

The Patella
Largest sesamoid bone in body, embedded within quadriceps femoris tendon.
Structure: Superior broad base (
basis patellae), downward pointing apex (apex patellae), convex anterior surface (facies anterior), articular posterior surface (facies articularis) divided by vertical ridge into larger lateral and smaller medial facets.Applied Anatomy: Improves quadriceps leverage angle; must differentiate fracture from bipartite/tripartite patella variations.
The Tibia
Medial, weight-bearing leg bone.
Upper End:
Expanded into medial condyle (
condylus medialis) and lateral condyle (condylus lateralis) bearing superior articular surfaces (facies articularis superior).Intercondylar Eminence (
eminentia intercondylaris): Central ridge flanked by medial and lateral intercondylar tubercles (tuberculum intercondylare mediale, laterale), separating anterior and posterior intercondylar areas (area intercondylaris anterior, posterior).Posterolateral aspect of lateral condyle bears fibular articular facet (
facies articularis fibularis).Tibial Tuberosity (
tuberositas tibiae/ бугристость большеберцовой кости): Prominent anterior surface elevation.
Shaft (
corpus tibiae):Three borders: Anterior (
margo anterior- sharp shin crest), Medial (margo medialis), Interosseous (margo interosseus- lateral).Three surfaces: Medial (
facies medialis- subcutaneous), Lateral (facies lateralis), Posterior (facies posterior- crossed by oblique soleal linelinea musculi solei).
Lower End:
Medial projection forms medial malleolus (
malleolus medialis); lateral surface features fibular notch (incisura fibularis).Inferior articular surface (
facies articularis inferior) and medial malleolar facet (facies articularis malleoli medialis) articulate with talus trochlea at ankle joint.
Side Determination: Tibial tuberosity anterior; medial malleolus medial and projecting distally.
Applied Anatomy:
Common site for acute osteomyelitis (upper end).
Fractures frequently occur at junction of upper and lower of shaft (poor blood supply leads to slow/non-union).
Subcutaneous medial surface is common source for bone grafts.
Pott's fracture: Forcible abduction/external rotation shearing posterior tibial margin against talus.

The Fibula
Lateral slender non-weight-bearing leg bone.
Upper End: Head (
caput fibulae) with apex (apex capitis fibulae) and circular articular facet (facies articularis capitis fibulae) articulating with tibia; neck (collum fibulae) is constriction below head.Shaft: Slender, with anterior, posterior, and interosseous borders; medial, lateral, and posterior surfaces.
Lower End: Lateral malleolus (
malleolus lateralis); medial surface bears triangular articular facet (facies articularis malleoli lateralis) for talus anteriorly and deep malleolar fossa (fossa malleoli lateralis) posteriorly.Applied Anatomy: Common peroneal nerve winds around fibular neck (vulnerable to injury/palsy); lateral malleolus crucial for ankle joint stability.



The Tarsal Bones (Ossa Tarsi)
Seven tarsal bones arranged in proximal and distal groups:
Proximal Group: Talus (superior) and Calcaneus (inferior).
Interposed Bone: Navicular (
os naviculare, features medial tuberositytuberositas ossis navicularis).Distal Group: Medial cuneiform, Intermediate cuneiform, Lateral cuneiform (
ossa cuneiformia), and Cuboid (os cuboideum).
Detailed Anatomy of Talus (Talus)
Head (
caput tali): Convex forward; bears navicular articular surface (facies articularis navicularis) and anterior calcaneal facet (facies articularis calcanea anterior).Neck (
collum tali): Constricted portion; inferior surface bears middle calcaneal facet (facies articularis calcanea media).Body (
corpus tali):Forms trochlea of talus (
trochlea tali) with superior facet (facies superior) for tibia, medial malleolar facet (facies malleolaris medialis), and lateral process (processus lateralis tali) bearing lateral malleolar facet (facies malleolaris lateralis).Posterior process (
processus posterior tali): Groove for flexor hallucis longus tendon (sulcus tendinis m. flexoris hallucis longi) flanked by medial and lateral tubercles.Inferior aspect bears posterior calcaneal facet (
facies articularis calcanea posterior).Sulcus Tali (
sulcus tali): Deep groove between middle and posterior calcaneal facets, forming tarsal sinus (sinus tarsi) with calcaneus.
Detailed Anatomy of Calcaneus (Calcaneus)
Largest tarsal bone forming heel prominence.
Surfaces: Anterior (bears cuboid articular surface
facies articularis cuboidea); Posterior (calcaneal tuberositytuber calcanei); Medial (shelf-like projection called sustentaculum talisustentaculum tali, grooved inferiorly for flexor hallucis longus tendon); Lateral (flat, bears peroneal trochleatrochlea fibularis); Superior (bears anterior, middle, and posterior talar articular facets separated by calcaneal sulcussulcus calcanei).
Metatarsals and Phalanges of Foot
Metatarsals (
ossa metatarsi): Five miniature long bones (). Metatarsal is shortest/thickest; Metatarsal is longest; Metatarsal base features prominent lateral tuberosity (tuberositas ossis metatarsi quinti).Phalanges (
ossa digitorum): Fourteen total—two for great toe (hallux), three for digits .
Bones of the Cranium (Ossa Cranii)
Cranial Divisions:
Neurocranium (
neurocranium/ мозговой череп): Encloses the brain. Comprises paired parietal and temporal bones; unpaired frontal, occipital, sphenoid, and ethmoid bones.Facial Skeleton / Viscerocranium (
viscerocranium/ лицевой череп): Comprises paired maxilla, zygomatic, nasal, lacrimal, palatine, inferior nasal concha; unpaired mandible and vomer.

The Occipital Bone (Os Occipitale)
Bounds posterior/inferior brain case; surrounds foramen magnum (
foramen magnum).Basilar Part (
pars basilaris/ базилярная часть):Inferior surface bears pharyngeal tubercle (
tuberculum pharyngeum).Lateral edges feature groove for inferior petrosal sinus (
sulcus sinus petrosi inferioris).Fuses with sphenoid body by age to form the inclined clivus (
clivus).
Lateral Parts (
pars lateralis/ латеральная часть):Inferior surface bears occipital condyle (
condylus occipitalis) articulating with atlas.Hypoglossal canal (
canalis nervi hypoglossi) pierces condyle base.Condylar fossa (
fossa condylaris) posterior to condyle may transmit condylar canal (canalis condylaris).Jugular process (
processus jugularis) projects laterally, forming jugular notch (incisura jugularis) which combines with temporal bone to form jugular foramen (foramen jugulare).Superior surface bears groove for sigmoid sinus (
sulcus sinus sigmoidei).
Squamous Part (
squama occipitalis/ затылочная чешуя):External surface: Center features external occipital protuberance (
protuberantia occipitalis externa); median external occipital crest (crista occipitalis externa) runs to foramen magnum; flanked laterally by superior nuchal line (linea nuchalis superior) and inferior nuchal line (linea nuchalis inferior).Internal surface: Center of cruciate eminence (
eminentia cruciformis) features internal occipital protuberance (protuberantia occipitalis interna); gives origin to internal occipital crest (crista occipitalis interna) inferiorly, groove for superior sagittal sinus (sulcus sinus sagittalis superioris) superiorly, and paired grooves for transverse sinus (sulcus sinus transversi) laterally.


The Parietal Bone (Os Parietale)
Paired quadrangular cranial vault bone.
Borders: Frontal (
margo frontalis), Occipital (margo occipitalis), Sagittal (margo sagittalis, internal surface bears groove for superior sagittal sinus and granular foveolaefoveolae granulares), Squamosal (margo squamosus).Angles: Frontal (
angulus frontalis), Occipital (angulus occipitalis), Mastoid (angulus mastoideus, inner groove for sigmoid sinus), Sphenoidal (angulus sphenoidalis- narrow anteroinferior angle).Features: External central parietal tuber (
tuber parietale) and superior/inferior temporal lines (linea temporalis superior et inferior); internal surface grooved by middle meningeal artery (sulcus arteriae meningeae mediae).


The Frontal Bone (Os Frontale)
Unpaired anterior skull bone.
Squamous Part (
squama frontalis/ лобная чешуя):External surface bears frontal tubers (
tuber frontale), superciliary arches (arcus superciliaris), median glabella (glabella), and supraorbital margins (margo supraorbitalis).Supraorbital margin features supraorbital notch/foramen (
incisura/foramen supraorbitale), medial frontal notch/foramen (incisura/foramen frontalis), and terminates laterally in zygomatic process (processus zygomaticus).Internal surface features groove for superior sagittal sinus ending inferiorly as frontal crest (
crista frontalis) at foramen caecum (foramen caecum).
Orbital Parts (
pars orbitalis/ глазничная часть):Horizontal orbital plates separated by ethmoidal notch (
incisura ethmoidalis).Concave orbital surface (
facies orbitalis) forms orbit roof, presenting lacrimal fossa (fossa glandulae lacrimalis) laterally, trochlear fovea (fovea trochlearis) and trochlear spine (spina trochlearis) medially.
Nasal Part (
pars nasalis/ носовая часть):Surrounds ethmoidal notch; presents median downward nasal spine (
spina nasalis).Flanked by openings of frontal sinus (
apertura sinus frontalis) leading into air-filled frontal sinuses (sinus frontalis) divided by septum (septum sinuum frontalium).
The Sphenoid Bone (Os Sphenoidale)
Complex central skull base bone comprising body, greater wings, lesser wings, and pterygoid processes.
Body (
corpus):Superior surface features sella turcica (
sella turcica) containing hypophysial fossa (fossa hypophysialis), bounded anteriorly by tuberculum sellae (tuberculum sellae) and prechiasmatic sulcus (sulcus prechiasmaticus), posteriorly by dorsum sellae (dorsum sellae) bearing posterior clinoid processes (processus clinoideus posterior).Lateral surfaces feature carotid sulcus (
sulcus caroticus).Anterior surface bears sphenoidal crest (
crista sphenoidalis) continuing as sphenoidal rostrum (rostrum sphenoidale); flanked by sphenoidal sinus openings (apertura sinus sphenoidalis) leading into sphenoidal sinus (sinus sphenoidalis) divided by septum.
Greater Wings (
ala major):Four surfaces: Cerebral (
facies cerebralis), Orbital (facies orbitalis), Maxillary (facies maxillaris), Temporal/Infratemporal (facies temporalis/infratemporalisseparated by infratemporal crestcrista infratemporalis).Three basal foramina: Foramen rotundum (
foramen rotundumfor maxillary nerve ), Foramen ovale (foramen ovalefor mandibular nerve ), Foramen spinosum (foramen spinosumfor middle meningeal artery; adjacent to spine of sphenoidspina ossis sphenoidalis).
Lesser Wings (
ala minor):Arise by two roots enclosing optic canal (
canalis opticusfor optic nerve ).Posterior free margins terminate medially as anterior clinoid processes (
processus clinoideus anterior).Superior orbital fissure (
fissura orbitalis superior) separates lesser and greater wings (transmits ).
Pterygoid Processes (
processus pterygoideus):Project downward; base pierced by pterygoid canal (
canalis pterygoideus).Comprise medial and lateral plates (
lamina medialis et lateralis) enclosing pterygoid fossa (fossa pterygoidea) and inferior pterygoid notch (incisura pterygoidea).Medial plate terminates inferiorly in hook-like pterygoid hamulus (
hamulus pterygoideus).

The Ethmoid Bone (Os Ethmoidale)
Central skull base bone forming parts of nasal cavity and orbits.
Parts: Vertical perpendicular plate (
lamina perpendicularis, forming upper nasal septum); horizontal cribriform plate (lamina cribrosa, perforated for olfactory nerves , bearing median upward crista gallicrista galli); and paired ethmoidal labyrinths (labyrinthus ethmoidalis).Labyrinths contain anterior, middle, and posterior ethmoidal cells (
cellulae ethmoidales), bounded laterally by thin orbital plate (lamina orbitalis) and medially by superior and middle nasal conchae (concha nasalis superior et media). Ethmoidal infundibulum (infundibulum ethmoidale) connects frontal sinus to nasal cavity.


The Temporal Bone (Os Temporale)
Paired bone housing hearing/equilibrium structures; comprises petrous, squamous, and tympanic parts.
Petrous Part (Pyramid -
pars petrosa):Apex faces anteromedially, presenting internal carotid canal opening (
apertura interna canalis carotici).Anterior Surface: Features trigeminal impression (
impressio trigeminalis), grooves/hiatuses for greater/lesser petrosal nerves (sulcus/hiatus nervi petrosi majoris et minoris), arcuate eminence (eminentia arcuata), and tympanic roof (tegmen tympani). Separated from squama by petrosquamous fissure (fissura petrosquamosa).Posterior Surface: Features internal acoustic opening (
porus acusticus internus) leading into internal acoustic meatus (meatus acusticus internus).Inferior Surface: Features slender styloid process (
processus styloideus); mastoid process (processus mastoideus, containing mastoid cellscellulae mastoideae, mastoid antrumantrum mastoideum, mastoid notchincisura mastoidea, and occipital groovesulcus a. occipitalis); stylomastoid foramen (foramen stylomastoideumfor facial nerve ); jugular fossa (fossa jugularis); external carotid opening (apertura externa canalis carotici); and petrosal fossula (fossula petrosa).Borders/Canals: Musculotubal canal (
canalis musculotubarius) at anterior border (divided into semicanal for tensor tympanisemicanalis m. tensoris tympaniand semicanal for auditory tubesemicanalis tubae auditivae); superior border grooved for superior petrosal sinus (sulcus sinus petrosi superioris).
Squamous Part (
pars squamosa): Temporal surface gives off zygomatic process (processus zygomaticus); inferior mandibular fossa (fossa mandibularis) and articular tubercle (tuberculum articulare) articulate with mandible.Tympanic Part (
pars tympanica): Encloses external acoustic opening/meatus (porus/meatus acusticus externus); separated by tympanosquamous (fissura tympanosquamosa), petrotympanic (fissura petrotympanica), and tympanomastoid (fissura tympanomastoidea) fissures.Temporal Bone Canals Summary:
Carotid Canal (
canalis caroticus): Transmits internal carotid artery from external opening to petrous apex.Facial Canal (
canalis nervi facialis): Transmits facial nerve () from internal acoustic meatus, bending at geniculum (genicilum canalis nervi facialis), exiting via stylomastoid foramen.


The Maxilla
Paired upper jaw bone comprising central body and four processes.
Body of Maxilla (
corpus maxillae):Encloses large air-filled maxillary sinus (
sinus maxillaris/ Highmore's antrum) opening via maxillary hiatus (hiatus maxillaris).Anterior Surface: Concave, presenting canine fossa (
fossa canina), infraorbital margin (margo infraorbitalis), infraorbital foramen (foramen infraorbitale), nasal notch (incisura nasalis), and anterior nasal spine (spina nasalis anterior).Infratemporal Surface: Bears maxillary tuberosity (
tuber maxillae) with alveolar foramina (foramina alveolaria) leading to alveolar canals (canales alveolares), and greater palatine groove (sulcus palatinus major).Nasal Surface: Presents maxillary hiatus, lacrimal groove (
sulcus lacrimalis), and conchal crest (crista conchalis).Orbital Surface: Forms orbit floor; features infraorbital groove/canal (
sulcus/canalis infraorbitalis).
Processes of Maxilla:
Frontal Process (
processus frontalis): Extends superiorly; bears anterior lacrimal crest (crista lacrimalis anterior) and ethmoidal crest (crista ethmoidalis).Alveolar Process (
processus alveolaris): Forms alveolar arch (arcus alveolaris) containing dental alveoli (alveoli dentales) separated by interalveolar septa (septa interalveolaria) for eight upper teeth.Palatine Process (
processus palatinus): Forms anterior bony palate (palatum osseum), uniting at midline nasal crest (crista nasalis).Zygomatic Process (
processus zygomaticus): Articulates with zygomatic bone.

The Palatine Bone (Os Palatinum)
L-shaped paired bone consisting of two plates and three processes:
Horizontal Plate (
lamina horizontalis): Completes posterior bony palate; features greater palatine foramen (foramen palatinum majus) and nasal crest (crista nasalis).Perpendicular Plate (
lamina perpendicularis): Adjoins maxilla nasal surface; medial side bears ethmoidal crest (crista ethmoidalis) and conchal crest (crista conchalis); lateral side grooved by greater palatine groove (sulcus palatinus major).Pyramidal Process (
processus pyramidalis): Projects posterolaterally; pierced by lesser palatine canals (canales palatini minores).Orbital Process (
processus orbitalis) & Sphenoidal Process (processus sphenoidalis): Project from superior perpendicular border, bounding sphenopalatine notch (incisura sphenopalatina).
Other Facial Bones
Inferior Nasal Concha (
concha nasalis inferior): Independent, thin curved plate attached to maxillary/palatine conchal crests.Nasal Bone (
os nasale): Paired bridge of nose bone.Lacrimal Bone (
os lacrimale): Thin medial orbital wall plate bearing posterior lacrimal crest (crista lacrimalis posterior) and lacrimal groove (sulcus lacrimalis), forming fossa for lacrimal sac (fossa sacci lacrimalis).Vomer (
vomer): Flat median bone forming posteroinferior nasal septum; superior wings (ala vomeris) fit over sphenoidal rostrum; free posterior border separates choanae (choanae).Zygomatic Bone (
os zygomaticum): Cheek bone featuring orbital, temporal, and lateral surfaces; zygomatico-orbital foramen (foramen zygomaticoorbitale) leads into canals opening at zygomaticofacial (foramen zygomaticofaciale) and zygomaticotemporal (foramen zygomaticotemporale) foramina; frontal process (processus frontalis) and temporal process (processus temporalis, forming zygomatic archarcus zygomaticus).


The Mandible (Mandibula)
Mobile lower jaw bone comprising a horizontal body and two vertical rami.
Body of Mandible (
corpus mandibulae):Superior Alveolar Part (
pars alveolaris): Alveolar arch (arcus alveolaris) with sockets (alveoli dentales) and septa (septa interalveolaria).Inferior Base (
basis mandibulae): Midline mental protuberance (protuberantia mentalis) flanked by mental tubercles (tuberculum mentale); mental foramen (foramen mentale, opening of mandibular canalcanalis mandibulae) located laterally; external oblique line (linea obliqua).Internal Surface: Midline mental spine (
spina mentalis), sublingual fossa (fovea sublingualis), digastric fossa (fossa digastrica), mylohyoid line (linea mylohyoidea), and submandibular fossa (fovea submandibularis).
Ramus of Mandible (
ramus mandibulae):Internal surface bears mandibular foramen (
foramen mandibulae), guarded by lingula (lingula mandibulae), giving origin to mylohyoid groove (sulcus mylohyoideus).Terminates superiorly in anterior coronoid process (
processus coronoideus) and posterior condylar process (processus condylaris, comprising headcaput mandibulae, neckcollum mandibulae, and pterygoid foveafovea pterygoidea).
Angle of Mandible (
angulus mandibulae): Junction of body and ramus; outer masseteric tuberosity (tuberositas masseterica), inner pterygoid tuberosity (tuberositas pterygoidea).
The Hyoid Bone (Os Hyoideum)
U-shaped bone at root of tongue between mandible and larynx.
Parts: Body (
corpus ossis hyoidei), paired greater horns (cornua majora), and paired lesser horns (cornua minora).
The Skull as a Whole and Cranial Cavities
Calvaria and Cranial Base Boundaries: Line connecting glabella, supraorbital margin, infratemporal crest, zygomatic arch, external acoustic opening, mastoid process base, superior nuchal line, and external occipital protuberance separates calvaria (
calvaria) from cranial base (basis cranii).Internal Cranial Base Fossae (
basis cranii interna):Anterior Cranial Fossa (
fossa cranii anterior): Formed by frontal orbital parts, ethmoid cribriform plate, and sphenoid lesser wings.Middle Cranial Fossa (
fossa cranii media): Formed medially by sella turcica; laterally by sphenoid greater wings, temporal squama, and petrous anterior surfaces.Posterior Cranial Fossa (
fossa cranii posterior): Formed by occipital bone, sphenoid body posterior part, temporal petrous/mastoid parts, and parietal mastoid angles.
Summary of Main Cranial Foramina and Transmitted Structures
Foramen Magnum: Transmits spinal cord / medulla oblongata junction.
Carotid Canal: Transmits internal carotid artery.
Cribriform Plate Apertures: Transmit olfactory nerve fibers ().
Optic Canal: Transmits optic nerve () and ophthalmic artery.
Superior Orbital Fissure: Transmits oculomotor (), trochlear (), ophthalmic (), and abducent () nerves.
Foramen Rotundum: Transmits maxillary nerve ().
Foramen Ovale: Transmits mandibular nerve ().
Stylomastoid Foramen / Internal Acoustic Meatus: Transmit facial nerve ().
Internal Acoustic Meatus: Transmits vestibulocochlear nerve ().
Jugular Foramen: Transmits glossopharyngeal (), vagus (), accessory () nerves, and internal jugular vein.
Hypoglossal Canal: Transmits hypoglossal nerve ().
Foramen Lacerum: Irregular opening at junction of petrous apex, occipital basilar part, and sphenoid body.

The Orbit (Orbita)
Pyramidal visual cavity; apex directed posteromedially, base forms orbital opening (
aditus orbitalis).Walls:
Medial Wall: Maxilla frontal process, lacrimal bone, ethmoid orbital plate, sphenoid body; anterior lacrimal sac fossa leads to nasolacrimal canal (
canalis nasolacrimalis); sutures contain anterior and posterior ethmoidal foramina (foramina ethmoidale anterius, posterius).Roof (Superior Wall): Frontal orbital surface and sphenoid lesser wing.
Lateral Wall: Zygomatic orbital surface and sphenoid greater wing.
Floor (Inferior Wall): Maxilla and zygomatic orbital surfaces, palatine orbital process.
Apex Openings: Superior orbital fissure and optic canal.
The Bony Nasal Cavity (Cavitas Nasalis Ossea)
Anterior piriform aperture (
apertura piriformis); posterior paired choanae (choanae).Bony septum (
septum nasi osseum) divides cavity into two halves.Nasal Meatuses:
Superior Nasal Meatus (
meatus nasi superior): Above middle concha; communicates with sphenoidal sinus and posterior ethmoidal cells.Middle Nasal Meatus (
meatus nasi medius): Between middle and inferior conchae; communicates with anterior/middle ethmoidal cells, maxillary sinus (via hiatus), frontal sinus (via infundibulum), and pterygopalatine fossa (via sphenopalatine foramenforamen sphenopalatinum).Inferior Nasal Meatus (
meatus nasi inferior): Below inferior concha; receives nasolacrimal canal.Common Nasal Meatus (
meatus nasi communis): Medial space between conchae and septum.

Major Skull Fossae
Temporal Fossa (
fossa temporalis): Lodges temporal muscle; bounded by temporal lines, zygomatic arch, and infratemporal crest.Infratemporal Fossa (
fossa infratemporalis):Bounded medially by lateral pterygoid plate; anteriorly by maxillary tuber/zygomatic bone; superiorly by sphenoid greater wing and temporal squama.
Communicates with orbit via inferior orbital fissure (
fissura orbitalis inferior) and pterygopalatine fossa via pterygomaxillary fissure (fissura pterygomaxillaris).
Pterygopalatine Fossa (
fossa pterygopalatina):Bounded anteriorly by maxillary tuber; medially by palatine perpendicular plate; posteriorly by sphenoid pterygoid process.
Communications:
Middle nasal meatus via sphenopalatine foramen.
Orbit via inferior orbital fissure.
Infratemporal fossa via pterygomaxillary fissure.
Middle cranial fossa via foramen rotundum.
External skull base via pterygoid canal.
Oral cavity via greater palatine canal (
canalis palatinus major).