Chapter 9 Lecture: Types of Collisions: Elastic and Inelastic Collisions

Fundamentals of Energy and Kinetic Energy

  • Energy exists in multiple physical forms, including kinetic energy, elastic potential energy, gravitational potential energy, and nuclear energy.

  • The principle of conservation of energy establishes that energy cannot be created or destroyed; it can only be transferred from one object to another or converted from one form to another within a system.

  • Kinetic energy is defined specifically as the energy possessed by an object due to its motion and mass. Any physical body possessing mass that is in motion with a non-zero velocity inherently possesses kinetic energy.

  • The scalar equation for translational kinetic energy is given by:   KE=12mv2KE = \frac{1}{2}mv^2   where mm represents mass and vv represents velocity or speed.

  • The SI derived unit of kinetic energy is determined from the fundamental units of mass (kgkg) and speed (m/sm/s):   [KE]=[m][v]2=kg×(m/s)2=kg m2/s2[KE] = [m][v]^2 = kg \times (m/s)^2 = kg\,m^2/s^2   This composite unit is defined as the Joule (JJ), where 1 J=1 kg m2/s21\,J = 1\,kg\,m^2/s^2.

  • Physical benchmarks and quantitative energy scales:

    • Force comparison: A force of 1 N1\,N roughly corresponds to the physical force required to push an elevator button.

    • High-velocity projectile (bullet): A bullet with mass m=4.20 gm = 4.20\,g (0.00420 kg0.00420\,kg) traveling at a high velocity of v=965 m/sv = 965\,m/s (approaching 1 km/s1\,km/s) carries a kinetic energy of:     KE=12(0.00420 kg)(965 m/s)2≈1956 JKE = \frac{1}{2}(0.00420\,kg)(965\,m/s)^2 \approx 1956\,J     This is approximately 1960 J1960\,J, or roughly 2000 J2000\,J rounded to one significant figure.

    • High-mass athlete (NFL linebacker): A football linebacker with mass m=125 kgm = 125\,kg (approximately 350 lb350\,lb) running at a sprint speed of v=6.5 m/sv = 6.5\,m/s carries a kinetic energy of:     KE=12(125 kg)(6.5 m/s)2=12(125 kg)(42.25 m2/s2)=2640.625 J≈2640 JKE = \frac{1}{2}(125\,kg)(6.5\,m/s)^2 = \frac{1}{2}(125\,kg)(42.25\,m^2/s^2) = 2640.625\,J \approx 2640\,J

    • Comparative significance: Despite moving at a fraction of the bullet's velocity (6.5 m/s6.5\,m/s versus 965 m/s965\,m/s), the substantial mass of the athlete results in a higher total kinetic energy (2640 J2640\,J compared to roughly 2000 J2000\,J), illustrating the quadratic influence of velocity coupled with the linear influence of mass.

Collision Framework and Total System Momentum

  • A mechanical collision is an isolated event where two or more bodies exert forces upon one another over a brief time interval.

  • Standard baseline experimental setup:

    • Two particles or objects, designated as mass A (mAm_A) and mass B (mBm_B).

    • Equal mass values: mA=1 kgm_A = 1\,kg and mB=1 kgm_B = 1\,kg.

    • The objects slide directly toward each other along a single axis on a horizontal, frictionless sheet of ice to ensure no net external horizontal forces act on the system (ΣFext=0\Sigma F_{ext} = 0).

    • Initial velocity vectors: Object A moves in the positive direction at vA,i=+1 m/sv_{A,i} = +1\,m/s, and Object B moves in the negative direction at vB,i=−1 m/sv_{B,i} = -1\,m/s.

  • Total initial linear momentum (PiP_i) of the two-mass system:

    • Linear momentum is a vector quantity given by P=mvP = mv.

    • Initial system momentum is calculated by summing the individual momentum vectors:     Pi=PA,i+PB,i=mAvA,i+mBvB,iP_i = P_{A,i} + P_{B,i} = m_A v_{A,i} + m_B v_{B,i}     Pi=(1 kg)(1 m/s)+(1 kg)(−1 m/s)=1 kg m/s−1 kg m/s=0 kg m/sP_i = (1\,kg)(1\,m/s) + (1\,kg)(-1\,m/s) = 1\,kg\,m/s - 1\,kg\,m/s = 0\,kg\,m/s

  • Total initial kinetic energy (KEiKE_i) of the system:

    • Kinetic energy is a scalar quantity and is strictly non-negative for moving bodies.

    • Initial system kinetic energy is the sum of the scalar values:     KEi=KEA,i+KEB,i=12mAvA,i2+12mBvB,i2KE_i = KE_{A,i} + KE_{B,i} = \frac{1}{2}m_A v_{A,i}^2 + \frac{1}{2}m_B v_{B,i}^2     KEi=12(1 kg)(1 m/s)2+12(1 kg)(−1 m/s)2=0.5 J+0.5 J=1.0 JKE_i = \frac{1}{2}(1\,kg)(1\,m/s)^2 + \frac{1}{2}(1\,kg)(-1\,m/s)^2 = 0.5\,J + 0.5\,J = 1.0\,J

  • The center-of-mass reference frame provides a simplified analytical perspective because the total system momentum in this frame is identically zero throughout the collision.

Scenario 1: Perfectly Elastic Collisions

  • Kinematic trajectory of Scenario 1:

    • The two identical 1 kg1\,kg masses collide head-on and bounce off one another cleanly.

    • Post-collision velocities: Object A rebounds in the negative direction at vA,f=−1 m/sv_{A,f} = -1\,m/s; Object B rebounds in the positive direction at vB,f=+1 m/sv_{B,f} = +1\,m/s.

  • Conservation of total momentum verification:

    • Final linear momentum calculation:     Pf=mAvA,f+mBvB,f=(1 kg)(−1 m/s)+(1 kg)(1 m/s)=0 kg m/sP_f = m_A v_{A,f} + m_B v_{B,f} = (1\,kg)(-1\,m/s) + (1\,kg)(1\,m/s) = 0\,kg\,m/s

    • Since Pf=Pi=0 kg m/sP_f = P_i = 0\,kg\,m/s, total linear momentum is strictly conserved (ΔP=Pf−Pi=0\Delta P = P_f - P_i = 0).

  • Conservation of total kinetic energy verification:

    • Final kinetic energy calculation:     KEf=12mAvA,f2+12mBvB,f2KE_f = \frac{1}{2}m_A v_{A,f}^2 + \frac{1}{2}m_B v_{B,f}^2     KEf=12(1 kg)(−1 m/s)2+12(1 kg)(1 m/s)2=0.5 J+0.5 J=1.0 JKE_f = \frac{1}{2}(1\,kg)(-1\,m/s)^2 + \frac{1}{2}(1\,kg)(1\,m/s)^2 = 0.5\,J + 0.5\,J = 1.0\,J

    • Change in kinetic energy (energy loss evaluation):     ΔKE=KEf−KEi=1.0 J−1.0 J=0 J\Delta KE = KE_f - KE_i = 1.0\,J - 1.0\,J = 0\,J

  • Rigorous definition of an elastic collision:

    • An elastic collision is defined as a collision in which both total linear momentum and total kinetic energy are conserved.

    • Explicit criteria:     ΔP=0\Delta P = 0     ΔKE=0\Delta KE = 0

    • Physical reality and constraints: Purely or perfectly elastic collisions require that no kinetic energy is converted into non-mechanical forms (such as thermal energy, permanent structural deformation, or acoustic waves). In macroscopic real-world physics, completely elastic collisions are an idealization, as almost all macroscopic encounters produce some minor energy dissipation.

Scenario 2: Partially Inelastic Collisions

  • Kinematic trajectory of Scenario 2:

    • The two identical 1 kg1\,kg masses collide head-on and rebound in opposite directions, but with significantly diminished speeds.

    • Post-collision velocities: Object A moves at vA,f=−0.5 m/sv_{A,f} = -0.5\,m/s; Object B moves at vB,f=+0.5 m/sv_{B,f} = +0.5\,m/s.

  • Momentum conservation check:

    • Total final momentum calculation:     Pf=mAvA,f+mBvB,f=(1 kg)(−0.5 m/s)+(1 kg)(0.5 m/s)=0 kg m/sP_f = m_A v_{A,f} + m_B v_{B,f} = (1\,kg)(-0.5\,m/s) + (1\,kg)(0.5\,m/s) = 0\,kg\,m/s

    • Total linear momentum remains conserved (Pf=Pi=0P_f = P_i = 0).

  • Final kinetic energy evaluation:

    • Final kinetic energy calculation:     KEf=12mAvA,f2+12mBvB,f2KE_f = \frac{1}{2}m_A v_{A,f}^2 + \frac{1}{2}m_B v_{B,f}^2     KEf=12(1 kg)(−0.5 m/s)2+12(1 kg)(0.5 m/s)2KE_f = \frac{1}{2}(1\,kg)(-0.5\,m/s)^2 + \frac{1}{2}(1\,kg)(0.5\,m/s)^2     KEf=12(1 kg)(0.25 m2/s2)+12(1 kg)(0.25 m2/s2)=0.125 J+0.125 J=0.25 JKE_f = \frac{1}{2}(1\,kg)(0.25\,m^2/s^2) + \frac{1}{2}(1\,kg)(0.25\,m^2/s^2) = 0.125\,J + 0.125\,J = 0.25\,J

  • Net change in system kinetic energy:   ΔKE=KEf−KEi=0.25 J−1.0 J=−0.75 J\Delta KE = KE_f - KE_i = 0.25\,J - 1.0\,J = -0.75\,J

    • The negative sign demonstrates a net loss of kinetic energy from the macroscopic mechanical system of 0.75 J0.75\,J.

  • Definition and classification:

    • A collision in which objects separate after impact but suffer a net loss of mechanical kinetic energy (ΔKE<0\Delta KE < 0) while conserving momentum (ΔP=0\Delta P = 0) is classified as an inelastic collision.

    • The loss of speed upon separation directly reflects the dissipation of 75%75\% of the initial mechanical kinetic energy into internal energy states.

Scenario 3: Completely Inelastic Collisions and Coalescence

  • Kinematic trajectory of Scenario 3:

    • The two identical 1 kg1\,kg masses collide head-on and stick together (fuse or coalesce) into a single composite mass (mtotal=mA+mB=2 kgm_{total} = m_A + m_B = 2\,kg).

    • Post-collision velocity of the combined structure drops to zero (vf=0 m/sv_f = 0\,m/s).

  • Momentum conservation check:

    • Final linear momentum calculation:     Pf=(mA+mB)vf=(2 kg)(0 m/s)=0 kg m/sP_f = (m_A + m_B)v_f = (2\,kg)(0\,m/s) = 0\,kg\,m/s

    • Momentum is strictly conserved (Pf=Pi=0P_f = P_i = 0).

  • Kinetic energy evaluation and complete dissipation:

    • Final kinetic energy calculation:     KEf=12(mA+mB)vf2=12(2 kg)(0 m/s)2=0 JKE_f = \frac{1}{2}(m_A + m_B)v_f^2 = \frac{1}{2}(2\,kg)(0\,m/s)^2 = 0\,J

    • Net kinetic energy loss:     ΔKE=KEf−KEi=0 J−1.0 J=−1.0 J\Delta KE = KE_f - KE_i = 0\,J - 1.0\,J = -1.0\,J

    • Exactly 100%100\% of the initial translational kinetic energy is lost from the system.

  • Definition of completely (purely) inelastic collisions:

    • When colliding bodies coalesce, stick together, and move with a single common final velocity, the interaction is designated as a completely (or purely) inelastic collision. This condition represents the maximum possible mechanical kinetic energy loss consistent with the conservation of linear momentum.

  • Analogies and physical mechanisms of energy conversion during coalescence:

    • Zero-external-force environments: Astronauts performing demonstration experiments in orbit operate in free fall where the net external force on the internal system is zero, providing ideal conditions to observe conservation of momentum during inelastic impacts.

    • Gravitational coalescence in deep space: Two isolated celestial bodies drifting in space that collide and fuse into a single larger body convert their orbital or translational kinetic energy into binding energy, compressive heating, and internal mechanical deformation.

    • Chemical synthesis: Free reactant particles or ions colliding in a fluid stick together through electrostatic forces to synthesize new molecular products. The initial kinetic energy of the individual reactants is converted into internal molecular chemical bonds, atomic rearrangement, and heat.

Energy Dissipation Mechanisms and Applications

  • Mechanical vs. internal energy conversion in collisions:

    • Because the universe obeys total energy conservation, dissipated kinetic energy is never lost from existence; rather, it transitions into non-mechanical forms, including thermal energy (heat), acoustic radiation (sound), atomic lattice rearrangement, and permanent plastic deformation.

  • The physical mechanism of elastic impacts (spring model):

    • During contact, the initial kinetic energy is temporarily transformed into elastic potential energy as the material compresses, analogous to a spring compressed away from its equilibrium point.

    • Once maximum compression is achieved during the collision impulse, the internal restoring forces push the objects back outward, converting the stored elastic potential energy entirely back into kinetic energy.

    • Golf ball impact dynamics: High-speed photography reveals that a golf ball struck by a club undergoes substantial elastic compression, flattening against the clubface like a stiff spring. Because golf equipment is engineered to minimize dissipative losses, the ball rapidly restores its shape, propelling forward with maximum kinetic energy and velocity.

  • The physical mechanism of inelastic impacts (energy absorption model):

    • In an inelastic interaction, the collision forces exceed the elastic limit of the material, performing work that permanently bends, fractures, or alters the physical structure.

    • Automotive crumple zones: In a vehicle crash, engineers intentionally design the vehicle's structural framework to undergo extensive inelastic deformation. As the metal crumples, initial kinetic energy is converted into plastic deformation, thermal dissipation, and acoustic energy. This deliberate structural failure absorbs the kinetic energy of the collision, minimizing the mechanical energy transmitted directly to the human occupants inside the cabin.

    • Symmetrical two-car head-on collision: If two identical vehicles collide head-on at identical speeds and stop dead on impact (vf=0v_f = 0), linear momentum is conserved at zero, while all initial kinetic energy is dissipated into the deformation of the frames, acoustic sound, and heat.