Parametric Curves, Arc Length, and Regularity
Fundamentals of Parametric Curves and Traversal
Distinction Between Geometry and Motion:
A geometric drawing in specifies which spatial points are visited, but omits the traversal order, traversal speed, and the multiplicity of visits to any given point.
To capture both the static geometry and the kinematic progression, spatial position is expressed as a function of a continuous real parameter.
Mathematical operations rely on the standard Euclidean norm and the inner product (dot product) .
Parametric Curve and Support (Definition 15.1):
A curve in is defined as a continuous mapping , where is an interval.
The real variable is designated as the parameter.
The individual coordinate functions constitute the parametric equations of the curve:
Continuity guarantees the absence of spatial jumps or breaks along the path.
The image set is defined as the support of the curve, representing the geometric trace or path drawn in space.
Kinematic Interpretation:
When the parameter represents time, the mapping specifies the position of a particle at time .
The first derivative , when it exists, represents the velocity vector.
The second derivative , when it exists, represents the acceleration vector.
The Euclidean norm of the velocity vector, , is the scalar speed.
Velocity encodes both instantaneous direction and instantaneous magnitude, whereas speed quantifies purely the scalar rate of progression along the path.
Influence of the Clock on Traversal (Example 15.2):
Let with . Consider two distinct parameterisations of the straight line segment connecting to on the domain :
Both mappings traverse identical supports and possess the same orientation (from to ).
Differentiating both mappings reveals distinct kinematic behaviors:
The motion defined by proceeds at constant speed , whereas the motion defined by starts at rest at () and accelerates continuously up to speed at .
Consequently, the support and traversal direction alone do not uniquely identify a curve as a parameterised mapping.
Multiplicity of Traversal (Example 15.3):
Consider the planar mappings:
Both curves share the identical support, namely the unit circle .
The curve executes a single turn, yielding an expected length of , while executes two complete turns, yielding an expected length of .
Any rigorous definition of curve length must measure total accumulated distance travelled rather than the static measure of the geometric image set.
Closed Curves and Simplicity
Definitions of Closedness and Simplicity (Definition 15.4):
A curve is defined as closed if the endpoints coincide:
A curve is defined as simple if it is injective on the interior of . Formally, whenever and at least one parameter is interior to .
Domain Restrictions and Properties of Simple Closed Loops (Observation 15.5):
While a curve may be defined over an arbitrary interval, closedness requires restricting attention to compact intervals .
For a compact interval , the definition of simplicity permits exactly one deviation from global injectivity: the equality of the boundary values .
This enables the formal classification of a simple closed curve (or simple closed loop), such as a circle traversed exactly once.
Simplicity strictly prohibits internal self-intersections and repeated overlapping sub-arcs, whereas closedness tests exclusively whether the trajectory returns to its initial position.
Analysis of the Strophoid (Example 15.6):
Consider the strophoid defined by:
Evaluating at and yields:
Because both and are interior points of the domain , the full curve exhibits an internal self-intersection at the origin and is therefore not simple.
Restricting the mapping to the compact domain yields a simple closed loop.
To verify simplicity on , set for :
Equating the second coordinates gives , meaning , which implies or .
If , equating the first coordinates yields .
Rearranging gives , so .
If , then , meaning .
The only distinct solutions are (or vice versa), which are the endpoints of the interval .
Thus, the restriction of the strophoid to satisfies the single allowed exception to injectivity at the boundary, confirming that it is a simple closed curve.
!The strophoid curve self-intersecting at the origin, with a simple closed loop for t in [-1, 1]
Regularity and the Tangent Line
First-Order Approximations and Secant Lines:
Continuity guarantees that points close in parameter space remain close in Euclidean space.
To define a directional line of motion, a first-order linear Taylor expansion is required. For a differentiable curve at an interior point :
If , the linear term dominates the remainder , establishing a unique directional axis.
For an adjacent parameter , the secant line passing through and is parameterised by as:
As , the secant direction vector converges directly to the non-vanishing velocity vector .
Definition of a Regular Curve (Definition 15.7):
A curve is regular if and for every .
The non-vanishing condition is strictly enforced only on the interior ; boundary behavior at and is evaluated separately.
Tangent Line and Unit Tangent Vector:
The tangent line to a regular curve at parameter is defined parametrically by:
The variable represents a spatial line coordinate and is distinct from the curve's parameter .
The unit tangent vector isolates direction from speed:
At self-intersections, distinct parameter values mapping to the same spatial coordinate can generate distinct tangent lines. Regularity is an intrinsic property of the parameterisation rather than a global topological condition like simplicity.
Tangent to a Circle (Example 15.8):
Consider the circle with radius .
The velocity vector is and the speed is constant:
At , position is and velocity is .
The tangent line is , which is the vertical line .
Taking the dot product of position and velocity:
This proves that the tangent line is everywhere perpendicular to the radial vector.
Implications of Vanishing Velocity:
A vanishing velocity vector invalidates the first-order approximation's ability to isolate a line via .
A vanishing derivative does not necessarily imply the non-existence of a geometric tangent line; rather, it indicates that the first-order differential test is inconclusive.
For example, the path on domain satisfies , yet its geometric support is a straight horizontal segment possessing a tangent line everywhere.
Cusp Singularity with a Geometric Tangent Line (Example 15.9):
Consider for .
The velocity vector is , which vanishes completely at .
Eliminating via gives the support , presenting a geometric cusp at the origin.
For , the secant vector from the origin is:
As , , meaning the geometric support admits a vertical tangent line at the origin.
However, the oriented unit tangent vector fails to be continuous across :
The motion approaches the origin moving downward along the vertical axis and reverses direction abruptly to leave moving upward.

Piecewise Regular Curves:
A curve is piecewise regular if it is continuous and there exists a finite partition of such that the restriction of to each closed subinterval is regular according to Definition 15.7.
Splitting the cusp curve of Example 15.9 at decomposes it into two regular sub-curves: and .
Polygonal paths represent piecewise regular curves whose singular points reside at the vertices.
Polar Curves and Velocity (Remark 15.10):
For curves defined in polar coordinates by radial distance with , the position vector is:
The standard orthonormal moving frame consists of:
Differentiating with respect to shows .
By the product rule, the velocity vector is:
Because and are mutually orthogonal unit vectors, the squared speed is:
Consequently, a polar curve is regular on the interior if and only if and do not vanish simultaneously at any interior parameter value.
Cardioid Analysis (Example 15.11):
The cardioid is defined for by the polar equation:
Its derivative with respect to is:
On the domain , simultaneous vanishing occurs when:
At , the curve forms a cusp at the origin. Partitioning at yields two regular segments: and .
If parameterised instead on , the cusp occurs at the boundary points . Because the regularity condition is evaluated strictly on the interior , the cardioid is regular under the interior-only convention over , despite retaining the geometric cusp.
Curve Length and Rectifiability
Geometric Approximation via Inscribed Polygons:
A general continuous curve can be approximated geometrically by connecting successive evaluation points with straight chords.
By the triangle inequality, refining a partition by introducing additional intermediate points cannot decrease the total length of the polygonal path.

Definitions of Length and Rectifiability (Definition 15.12):
Let be a continuous curve, and let be a partition of the interval :
The length of the inscribed polygonal path associated with is defined as:
The arc length of is the supremum of all such polygonal approximations:
The curve is rectifiable if and only if its length is finite: .
Distance Travelled Versus Endpoint Displacement (Example 15.13):
For a straight line segment on , every partition yields:
Consider the oscillating trajectory on , which travels from to and returns to .
Evaluating the partition yields:
By the reverse triangle inequality, for any points in any partition:
Summing over any partition shows , proving .
The total distance travelled is , even though the geometric support is a segment of length and the net endpoint displacement is .
Heuristic Justification of the Speed Integral:
For a differentiable curve, a displacement across a small step expands as:
Taking the norm gives the straight-line chord length between two temporal positions:
Applying the triangle and reverse triangle inequalities:
Dividing by and taking the limit as eliminates the remainder term since , yielding:
Summing across partition gives:
As the partition mesh approaches zero (), the summation converges to the Riemann integral .
Rigorous Computation and Proof of Arc Length
Arc Length Theorem for Curves (Theorem 15.14):
If , then is rectifiable, and its length is given by the integral of its speed:
Non-vanishing velocity is not required for this theorem to hold.
Complete Proof of Theorem 15.14:
Step 1: Establishing the Upper Bound .
Let be a continuous vector-valued function, and define .
If , the inequality holds trivially.
If , define the unit vector , so that and .
Express the norm via the dot product and move the constant vector inside the integral:
Applying the Cauchy-Schwarz inequality to the integrand yields . Therefore:
For any partition of , express displacement via the Fundamental Theorem of Calculus:
Taking norms and summing over all subintervals:
Taking the supremum over all possible partitions establishes rectifiability and confirms the upper bound:
Step 2: Recovering the Lower Bound Using Uniform Continuity.
Let . Because is continuous on the compact interval , the Heine-Cantor theorem guarantees that is uniformly continuous.
Choose such that for all :
Select a partition with mesh size satisfying for every .
Fix an arbitrary point . Because , the Fundamental Theorem of Calculus gives:
Taking norms and applying the integral bound from Step 1:
Applying the reverse triangle inequality with and :
Rearranging and dividing by the positive scalar isolates the instantaneous speed at :
Integrate both sides of this inequality with respect to the variable over . The terms on the right-hand side are constant with respect to :
Summing across all subintervals gives:
Since , this implies:
Because is arbitrary, taking the limit as yields:
Combining Step 1 and Step 2 demonstrates that .
Analytical Insights from the Proof (Observation 15.15):
The linchpin of the argument is uniform continuity, which permits a single, uniform to bound error across every subinterval simultaneously.
Vanishing velocity points do not impair the integration, confirming that interior regularity () is necessary for defining unit tangents, but superfluous for establishing rectifiability and total length.
Additivity of Arc Length:
For any continuous curve partitioned at an intermediate parameter , arc length is strictly additive:
Inserting the division point into any existing partition cannot decrease polygonal length, and decomposing partitions across confirms the identity.
Consequently, the total length of any piecewise curve (including piecewise regular curves) is obtained by integrating speed over each smooth subinterval and summing the results.
Computational Applications (Example 15.16):
Cartesian Function Graphs:
The graph of a function is parameterised by .
The velocity is . Because the first component is identically , never vanishes, rendering all Cartesian graphs inherently regular.
The arc length formula specializes to:
For an affine linear function , , yielding: This matches the Euclidean distance between endpoints and .
For the parabola on , , giving:
The Circular Helix:
Let with parameters , , on the interval .
The velocity is .
Speed is uniform along the helix:
Total arc length is:
For a single complete revolution (), unrolling the bounding cylinder into a plane produces a right-angled triangle with base (circumference) and height (pitch).
The Pythagorean theorem yields hypotenuse length , matching the spatial integral.
Reparametrisation, Orientation, and Pathological Curves
Invariance Under Regular Reparametrisation (Proposition 15.17):
Let and let be a bijection satisfying for all .
Define the reparameterised curve by . Then:
Proof:
By the vector chain rule, . Taking norms yields:
Because is continuous and non-zero on , by the intermediate value theorem it maintains a constant sign.
Case 1: Orientation-Preserving ().
Here and , with .
Substituting and :
Case 2: Orientation-Reversing ().
Here and , with .
Transforming the integral:
Both cases confirm that length is invariant under any regular bijective reparameterisation.
Orientation Versus Domain Mismatch:
On the domain , the curves and traverse the circle in opposite directions via the decreasing bijection . Both have length .
Conversely, the mapping on has length .
The transformation maps to , which is not a bijection onto the original domain .
Reparametrisation invariance applies exclusively to bijective changes of parameter; multiple coverings of a support scale the length accordingly.
Arc Length for Polar Curves:
Combining polar speed (Remark 15.10) with Theorem 15.14 gives the polar arc length formula:
Applying this to the cardioid with :
Using the trigonometric identity , the speed simplifies to:
The total length of the cardioid over is:
Decomposing the domain to resolve the absolute value:
The absolute value is required because speed is non-negative even when trigonometric factors change sign.
A Bounded Continuous Curve of Infinite Length:
Rectifiability is not guaranteed by continuity and boundedness alone.
Define the continuous function on :
Consider the curve . Because , the support is entirely confined within the compact box .
Define sample parameters for by:
Evaluating the function at these nodes:
Selecting the partition , the polygonal length is bounded below by the vertical displacements:
Summing these terms:
By comparison with the divergent harmonic series, this sum approaches as .
Thus, . Being trapped in a bounded region does not ensure a finite path length.
The Arc-Length Parameter
Definition and Mechanics of Arc-Length Parameterisation (Definition 15.18):
Let be regular, and fix a base parameter .
The arc-length function is defined by:
If , represents distance travelled past . If , is negative and represents the negative distance back to .
If , then maps monotonically onto .
Because is regular, its speed is continuous and strictly positive on . Consequently, for any , .
Therefore, is strictly increasing on , guaranteeing the existence of a continuous, strictly increasing inverse function denoted by .
A curve is said to be parameterised by arc length if its speed satisfies at every interior point.
Unit-Speed Derivation:
Reparameterise the curve by setting for .
By the Fundamental Theorem of Calculus, the derivative of is:
By the inverse function theorem for single-variable calculus, the derivative of is:
Differentiating with respect to via the chain rule:
Taking the norm of yields:
For any sub-interval , computing its length via Theorem 15.14 gives:
Thus, differences in the arc-length parameter directly measure intrinsic curve distance rather than straight-line Euclidean displacement.
Boundary Behavior and Invertibility:
The identity is guaranteed on the interior of the parameter interval. If or , may fail to remain bounded at the boundaries.
For example, consider on with . The velocity is , which vanishes at .
The arc length is , giving inverse .
The derivative is unbounded as .
However, the reparameterised spatial curve is , which is smooth on the entire closed interval.
This distinction separates the regularity of the parameter transformation from the smoothness of the resulting geometric curve .
Arc-Length Parameterisation of a Circle (Example 15.19):
Let on with .
The speed is , so the arc-length function is:
Inverting gives .
The arc-length reparameterisation is:
Differentiating verifies unit speed:
The angle turned after travelling distance along the circle is exactly .
Arc-Length Parameterisation of a Helix (Example 15.20):
Let with , , .
Set the constant speed factor . With base parameter :
The arc-length reparameterisation is:
Differentiating yields:
The scaling factor adjusts the rotational and vertical rates simultaneously so that the combined speed is .
Theoretical Value of Arc Length (Remark 15.21):
In an arbitrary parameterisation, computing the unit tangent vector requires division by the scalar speed:
In an arc-length parameterisation, because speed is identically , the unit tangent is simply the derivative itself:
Differentiating with respect to isolates intrinsic geometric variation per unit of physical distance travelled, eliminating velocity and acceleration artifacts.
Even when cannot be expressed in terms of elementary functions (such as for the parabola where ), the guaranteed existence of the monotonic inverse function makes arc length a foundational tool for defining curvature and normal vectors.
Worked Comprehensive Review Example
Problem Statement:
Analyze the parametric curve defined by:
Determine its support, simplicity, closedness, velocity, speed, total length, tangent line at , and arc-length parameterisation based at .
Detailed Step-by-Step Solution:
Support and Traversal Multiplicity:
The parametric equations satisfy .
The geometric support is the circle centered at the origin with radius .
As ranges from to , the angle ranges from to , completing exactly one counterclockwise revolution.
Simplicity and Closedness:
Boundary evaluation: and .
Because , the curve is closed.
For , . Since the map is injective on , there are no self-intersections on the interior.
Thus, the curve satisfies the exception condition only at its boundaries, confirming it is simple and closed.
Velocity and Speed:
Differentiating with respect to :
Computing the speed:
Speed is constant () throughout the motion.
Total Curve Length:
Applying Theorem 15.14:
Tangent Line at Parameter :
Evaluate position:
Evaluate velocity:
The parametric equation of the tangent line is:
In Cartesian coordinates, this corresponds to the horizontal line .
Arc-Length Parameterisation Based at :
Compute the arc-length integral:
Solve for in terms of :
Substitute into to obtain the unit-speed curve :
The domain of the arc-length parameter is .
Verifying unit speed: