Radial Pulse Assessment
Pre-Procedure Preparation and Patient Identification
Initial Clinical Steps:
Perform hand hygiene prior to initiating patient contact.
Ensure patient privacy throughout the assessment.
Introduce yourself to the patient (e.g., "Miss Morgan? Hi. My name is Denisha. I'm gonna be the nurse taking care of you today. Okay?").
Patient Verification:
Verify the patient's identity using two separate identifiers by checking their armband and asking for verbal confirmation:
First and last name (e.g., Jessica Morgan).
Date of birth (e.g., 02/05/1989).
Pre-Assessment Review:
Assess for key physiological and clinical factors that can influence heart rate and rhythm prior to measurement:
Medical history
Disease processes
Age
Exercise and physical activity levels
Medications
Patient Positioning and Personal Protective Equipment
Personal Protective Equipment (PPE) Guidelines:
Clean gloves are worn only when the nurse may come into contact with bodily fluids or when the patient is placed under protective precautions.
Patient Positioning Protocols:
Assist the patient into a supine or sitting position.
Supine Position:
Lower the head or bed if necessary.
Place the forearm along the patient's side with the wrist extended, OR rest the forearm across the patient's chest or upper abdomen (e.g., "Mister Thompson, I'm gonna take your arm and rest it here.").
Sitting Position:
Bend the elbow at a angle.
Support the lower arm on the chair armrest or on your arm.
Slightly extend or flex the wrist with the palm facing down.
Palpation Technique and Pulse Assessment
Finger Placement and Anatomical Landmarks:
Place the tips of your first two or middle three fingers over the groove along the thumb side (radial side) of the patient's inner wrist.
Slightly extend or flex the wrist with the palm down until you locate the strongest pulse.
Pressure Application Method:
Press against the radius bone, obliterating the pulse at first.
Gradually relax the pressure until the pulse becomes readily palpable.
Pulse Character and Quality Rating:
Determine the strength and thrust of the vessel against your fingertips using the following classifications:
Bounding
Full or strong
Barely palpable or diminished
Absent and not palpable
Note the regularity of the pulse rate and rhythm.
Pulse Measurement, Rates, and Rhythm Evaluation
Timing Initiation:
Once the pulse is felt consistently, look at your watch.
When the second hand reaches a number on the dial or when the digital display reaches a round number, begin counting.
Count the first beat felt as count .
Counting Duration Rules:
Regular Pulse:
Count the rate for and multiply the total by ().
The standard physiological range for a normal radial pulse is .
Irregular Pulse:
Count for a full .
Note the exact frequency and pattern of the irregularity.
Bilateral Comparison and Pulse Deficit:
Compare radial pulses bilaterally (on both wrists) to assess symmetry.
Assess for a pulse deficit (for detailed procedures, review the protocol for assessing an apical-radial pulse).
Post-Procedure Care and Clinical Follow-Up
Patient Comfort and Safety:
When finished, assist the patient into a comfortable position.
Reassure the patient and confirm comfort (e.g., "Are you comfortable? Alright. Well, just let me know if you need anything. Okay? I'll be right out at discuss your findings with her.").
Follow-Up Evaluation:
Compare the measured pulse rate and character with the patient's baseline parameters.
Evaluate the measured rate against the acceptable, age-specific physiological range.