Risk Management and Assessment Overview
Purpose of Risk Management
Essential for the health, safety, and well-being within the University.
Required to manage risks in the workplace, on campus, and during activities efficiently.
Involves determining potential sources of harm to the university community.
Risk Assessment
Defined as the systematic process to identify, evaluate, and control risks.
Requirement established by legislation; necessary for compliance.
Aim: To identify feasible measures to mitigate risks rather than generating excessive documentation.
Supports evaluation of existing controls to ensure they are appropriate and effective.
Reporting Requirements
Any risks rated as HIGH (i.e., a score of 12 or greater) must be reported to Corporate Health and Safety.
Assessment Details
Assessment Date: 03 Nov 2025
Review Date: 02 Nov 2026
Faculty/School/Service/Team: SELS
Site and/or Building: King Henry Building – Lab 4.12, 4.10
Description of Assessment: Level 4 Microbiology and Molecular Biology Practicals
Assessor Names: Dr. Athanasios Rizoulis, Elaine Rudge
Responsible Person: Christina Scott (Technical Manager)
High Risks Identified: 0
Actions Required: 0
Risk Evaluation Tables
1. Hazard Identification
1.1 Handling Glass Apparatus
Hazard: Sharp objects from broken glass.
Who Might Be Harmed: Students and staff.
Risk Detail: Cuts to skin.
Existing Controls:
Follow lab practical instructions carefully.
Inspect glassware before use; do not use damaged items.
Dispose broken glass in sharps bin, larger pieces handled by technical team.
Risk Levels:
Likelihood (LH): 2
Impact (IP): 3
Risk Rating (RR): 6
1.2 Equipment Failure
Hazard: Equipment fails during operation.
Who Might Be Harmed: Students and staff.
Risk Detail: Electric shock or injury.
Existing Controls:
Only use equipment designed for its purpose.
Portable equipment tested by technical team; check for PAT label.
Risk Levels:
Likelihood (LH): 1
Impact (IP): 5
Risk Rating (RR): 5
1.3 Bunsen Burners
Hazard: Burns/scalds from Bunsen burner during aseptic procedures.
Who Might Be Harmed: Students and staff.
Risk Detail: Burns/scalds.
Existing Controls:
Use Bunsen in clear areas away from flammable materials.
Gas shut-off points provided; tubing and burner checked regularly (at least once per term).
Do not leave unattended; ensure lab coat is properly sized, tie back long hair.
Use a cooker style lighter for increased distance to flame.
Risk Levels:
Likelihood (LH): 2
Impact (IP): 4
Risk Rating (RR): 8
2. Risk from Chemical Handling
2.1 Handling Hot Agar
Hazard: Burns/scalds when pouring agar plates.
Who Might Be Harmed: Students and staff.
Risk Detail: Burns/scalds.
Existing Controls:
Agar cooled to 45°C-55°C before distribution to students.
Use heat-resistant gloves when handling hot agar.
Risk Levels:
Likelihood (LH): 2
Impact (IP): 4
Risk Rating (RR): 8
2.2 Use of Chemicals
Hazard: Exposure to harmful chemicals.
Who Might Be Harmed: Students and staff.
Risk Detail: Risks to skin, eye contact, and inhalation.
Existing Controls:
Refer to COSHH assessments for specific lab practicals.
Wear suitable footwear (closed-toe).
No food/drinks permitted in the lab.
Only trained personnel handle and dispose of concentrated chemicals.
Maintain cleanliness in the lab; report spills to staff immediately.
All students to wear gloves during Gram staining protocol.
Risk Levels:
Likelihood (LH): 2
Impact (IP): 4
Risk Rating (RR): 8
3. Biological Hazards
3.1 Handling Microorganisms
Hazard: Exposure to microbiological organisms.
Who Might Be Harmed: Students and staff.
Risk Detail: Potential entry of pathogens/microbes through skin, eyes, inhalation, or ingestion.
Existing Controls:
Refer to COSHH assessment for relevant practicals.
Inform Dr. Athanasios Rizoulis if immune-compromised.
Wear designated laboratory coats; no eating/drinking allowed.
Avoid touching face/mouth/eyes.
Risk Levels:
Likelihood (LH): 2
Impact (IP): 3
Risk Rating (RR): 6
4. General Laboratory Safety
4.1 Slips, Trips, and Falls
Hazard: Physical injuries from slips, trips, and falls.
Who Might Be Harmed: Students and staff.
Risk Detail: Cuts, bruises, injury.
Existing Controls:
Wear appropriate footwear (closed-toe).
Report spills immediately; use wet floor signs.
Remove bags and coats in the laboratory; keep pathways clear.
Risk Levels:
Likelihood (LH): 1
Impact (IP): 3
Risk Rating (RR): 3
4.2 Manual Handling
Hazard: Risk of back or muscle injuries.
Who Might Be Harmed: Students and staff.
Risk Detail: Muscle strain injuries.
Existing Controls:
Technical team places large equipment on benches; do not move unless instructed.
Staff must complete manual handling training.
Risk Levels:
Likelihood (LH): 1
Impact (IP): 4
Risk Rating (RR): 4
4.3 General Injuries
Hazard: Various potential injuries in the lab.
Who Might Be Harmed: Students and staff.
Risk Detail: General accidents in the laboratory.
Existing Controls:
All students must read Health & Safety precautions in the Lab Manual.
Report all accidents or near misses to technical team members.
Additional support for students under 18 years old provided during health and safety briefings.
Risk Levels:
Likelihood (LH): 1
Impact (IP): 3
Risk Rating (RR): 3
4.4 Action Plan
Total Number of Actions:
Actions Completed:
Actions in Progress:
Actions Not Started:
Action Details:
Reflect with the additional controls highlighted in the risk evaluation tables.
Responsible individuals and target dates must be assigned for remedial actions.
Conclusion
All personnel within the Microbiology lab must adhere to these risk assessment guidelines to ensure safety and well-being in laboratory practices.
Continuous improvements to these controls and ongoing review of practices, training, and risk evaluations is essential to foster a safe working environment.