Untitled
Enzymes & Enzyme Kinetics
Sucrose + O₂ → CO₂ + H₂O + Energy
This is a highly exergonic reaction
Very favoured, negative delta G
We should predict this would happen
The combustion of sugar should happen according to the laws of thermodynamics.
So why doesn’t it happen at a measurable rate?
Why doesn't this reaction occur?
The free energy of products need to be lower than free energy of reactants
There is a transition state that the reactions needs to overcome (ie changing/twisting/turning the reactants it to help form product)
The enzyme help with this twisting and lowers that transition statement (energy needs to convert reactant to products)
Enzymes
Catalysts increase the rate of chemical reactions by lowering the activation energy required to progress through the transition state.
The breakdown of H₂O₂ into 2 H₂O and O₂ can be done through either:
The enzyme catalase
Certain metal ions, such as Fe³⁺ (chemical catalysis)
Enzymes work in similar ways to catalysts, but enzymes have some differences from typical chemical catalysts.
Enzymes help to lower the activation energy needed to reach the transition state.
The transition state can be unlikely because the reactants need to be twisted/moved into a configuration that can form the products.
This is true even for an exergonic reaction.
Enzymes lower the activation energy, but the overall Gibbs free energy change (ΔG) of the reaction stays the same.
This allows the reaction to occur much more quickly.
This is true for both chemical catalysts and enzymes.
Important:
Catalysts and enzymes do not change ΔG.
They change the rate at which equilibrium is reached by lowering the activation energy.
Cofactors, Coenzymes & Prosthetic Groups
Some enzymes need cofactors, which can be:
Inorganic molecules, such as metals
Complex organic molecules called coenzymes
Coenzymes that are very tightly bound to an enzyme are called prosthetic groups.
The enzyme without its required cofactor/coenzyme is called an apoenzyme.
The complete, functional enzyme containing its required cofactor is called a holoenzyme.
Holo = complete
Apo = missing something
The apoenzyme is missing something, so it needs something added to become the holoenzyme.
Coenzymes are often derived from vitamins.
They provide chemical groups or chemical reactivity that is not easily possible using only the standard protein amino acids.
There are special things about enzymes that do not necessarily fit with what we would expect from a typical catalyst:
Enzymes are usually proteins, but catalysts do not have to be proteins.
For example, iron can act as a catalyst.
Properties of Enzymes
Enzymes allow reactions with very slow rates to occur faster.
They are catalysts, but have properties that differ from what we would expect from a typical chemical catalyst.
a) Extremely Efficient
Enzymes are usually much more efficient than inorganic or synthetic catalysts.
b) Highly Specific
Enzymes are highly specific and stereospecific.
A chemical catalyst may take a non-chiral molecule and add a group to make it chiral, which can produce a mixture of D and L products.
For example, an iron catalyst does not have a chiral active site.
X + Y → Z
Z could be produced in either the D or L form.
An enzyme will often produce only one stereoisomer because its active site is stereospecific.
The active site is shaped so that it favours one particular orientation.
Therefore, the enzyme can specifically produce either the D or L form.
c) Physiological Conditions
Enzymes operate under physiological temperature and pH.
They have evolved to function in living systems.
Chemical catalysts are not necessarily evolved to function under specific physiological conditions.
An enzyme can denature if environmental conditions change too much.
d) Controlled by Regulatory Mechanisms
We do not always want a reaction to occur, so enzymes can be turned on and off depending on when they are needed.
The enzyme can be chemically modified, such as through phosphorylation, to make it inactive.
Active Site
The active site of an enzyme is shaped to promote interactions with the reactant and stabilize the transition state.
The active site has a shape and chemical environment that allows the reaction to proceed more easily.
Both enzymes and catalysts:
Increase reaction rate.
Do not change ΔG.
Can catalyze both the forward and reverse reactions.
Are present at relatively low concentrations compared with substrates and products.
Are not consumed by the reaction.
The substrate is consumed, but the catalyst/enzyme is regenerated.
Enzyme Kinetics
Enzyme kinetics involves mathematical descriptions of the properties of enzymatic reactions.
This field started in 1902 when Adrian Brown described the reaction:
Sucrose + H₂O → glucose + fructose
The reaction is catalyzed by the yeast extract enzyme β-fructofuranosidase.
Initial Velocity
The initial rate of the reaction increased as the sucrose concentration increased, but only up to a certain point.
At this point, the enzyme became effectively saturated with respect to [sucrose].
At higher substrate concentrations, with a constant amount of enzyme, the initial reaction rate (v₀) reaches a maximum and becomes independent of substrate concentration.
This maximum rate is called Vmax.
Michaelis-Menten Theory
In 1913, Michaelis and Menten proposed a theory to explain this phenomenon.
V₀ = Initial Velocity
V₀ is the initial velocity of the reaction.
It measures the initial formation of a product when the first couple of substrate molecules are added.
It tells us how fast the reaction occurs initially.
What Happens as We Add More Substrates?
As we add more substrate, the initial velocity will initially increase proportionally.
However, the rate will eventually level off to a Vmax when we add lots of substrate.
The enzyme becomes saturated.
The enzymes are essentially all occupied with substrate, so adding more substrate does not significantly increase the rate.
Enzyme-Substrate Complex
The formation of the enzyme-substrate complex is defined as:
Where k₁ and k₋₁ are rate constants
Under case K is equilibrium constant (K = [ES] / [E][S]), however here we use lowercase k as these are speeds
k1 and k-1 are not the same
if k1 is very fast but k-1 is very slow (doesn't like breaking down to E + S), then we will have lots of ES (at equilibrium there is lots of ES)
Related to equilibrium constant K
These rate constants describe the speed at which each part of the reaction occurs.
K₁
k₁ describes the binding of E and S to form the ES complex.
The rate depends on:
a) How quickly E can bind S
How much they want to be together
per second
b) How much S is present
Per M
More abundant —> will happen quickly
This is a second-order rate constant, because both E and S are involved in the binding reaction (depends on 2 factors)
Its units are M⁻¹ s⁻¹
→ Describes how much S there is and how quickly E and S can bind.
K₋₁
k₋₁ describes the dissociation of the ES complex back into E and S.
E does not need to find S because S is already bound
So we look at if they want to stay together or if they lose affinity quickly
Therefore, this is a first-order rate constant.
Its units are s⁻¹
→ Describes how quickly one ES complex can dissociate into E + S.
Why Does the Reaction Saturate?
The reason that the reaction saturates is that during the catalytic reaction, an enzyme-substrate complex (ES) is formed.
The amount of ES depends on the amount of enzyme and substrate
k2= rate at which enzyme coverts subtracted into product (involves twisting)
at saturated concentration, the k2 will determine rate of reaction (as know we depend on how well Es can turn into P)
If there is less substrate, then k1 is determining step
The formation and breakdown of the enzyme-substrate complex, assuming a large excess of substrate, can be summarized by:
Typically, the slowest step in this scheme is the breakdown of ES into products, i.e. k₂.
For many enzymatic reactions, k₂ is relatively slow.
Therefore, the “bottleneck,” or rate-limiting element of the reaction, is the amount of ES available to form products.
At pre-saturation/sub-saturation levels, the rate of the reaction is proportional to [S].
As [S] increases, more ES forms, increasing the reaction rate.
At saturating levels of [S], where effectively all E is in the ES form:
The rate of the reaction becomes insensitive to further increases in [S].
The velocity of the reaction is therefore maximized at Vmax.
k₋₂ is usually negligible because E and P will tend to dissociate/“float away” rather than readily reform the ES complex.
Michaelis-Menten Equation
They derived a basic equation to explain this behaviour:
Michaelis-Menten equation
V₀ = initial velocity
Vmax = maximum velocity
how fast can reaction possibly go
Km = Michaelis constant, which describes the relationship between substrate concentration and reaction rate
constant for specific enzyme we are looking at
[S]
substrate concentration which determines the velocity
Every enzyme/substrate combination has its own definitive Km.
What are the units for Km?
How do we get a “feel” for the nature of Km?
The unit for Km is the same as that for [S], which is M
Understanding Km
What if we set: Km=[S]
Then:
Therefore:
Km = [S] when V₀ = ½ Vmax
Tells us how much substrate we need to get it to go (½ vmax)
Km becomes a value that tells us at what value will the reaction speed up
Is Km a Measure of Affinity?
Not officially
doesn't exactly meet requirements for affinity
To understand why, we first consider Kd (as that measures affinity)
Kd = Dissociation Constant
special type of Keq
kd will be bigger is there is more E and S
kd will be smaller if there is more ES
more affinity (wants to stay as ES)
Has unit M
For the simple dissociation: ES ⇌ E + S
If we wanted to measure affinity, we could define:
Kd= [E][S]/ [ES]
The concentrations of E, S, and ES are also proportional to the rates at which they interchange
If ES never come apart, the k-1 will be small and if E and S form ES then k1 will be big
If:
k₁ = rate of ES formation
k₋₁ = rate of ES breakdown
Then:
So Kd can also be represented as Kd= k-1/ k1
In biochemistry, when this describing Kd in this way, it is
common to call k-1 as koff and k1 as kon :
k₋₁ = koff
k₁ = kon
So if
Then is Km a measure of affinity?
By definition, no.
Km is different from Kd.
Kd is the dissociation constant and is the parameter that directly describes binding affinity.
However:
If k₂ is very slow compared with k₋₁, which is often approximately true, then:
Km ≈ k₋₁ / k₁
Therefore:
Km ≈ Kd
Under these conditions, Km can effectively behave like a measure of affinity.
There needs to be enough substrate for the reaction to occur, so Km tells us how much substrate is needed to reach ½ Vmax.
If we add a concentration of substrate equal to Km, the reaction proceeds at ½ Vmax.
This is similar in concept to affinity because substrate concentration affects how much enzyme is present as ES.
Km is always a constant describing the dependence of the reaction on substrate concentration.
It is similar in concept to “affinity,” but it is not officially the same thing.
Km is the [S] at which:
V₀ = Vmax/2
Vmax and kcat
Vmax describes the maximum velocity a reaction can proceed at for a particular concentration of enzyme.
However, we want to describe the rate of an enzyme regardless of enzyme concentration.
For this, we define kcat.
kcat
kcat is the catalytic rate constant.
When k₂ is the rate-limiting catalytic step:
kcat = k₂
We can write: Vmax = kcat[ET]
where:
kcat = catalytic rate constant
[ET] = total enzyme concentration
The maximum velocity of a chemical reaction is proportional to:
The concentration of enzyme
The rate of the rate-limiting step
kcat and the Rate-Limiting Step
Consider:
Typically, the rate-limiting step is k₂.
Therefore:
Vmax=k2[ET] because Vmax occurs when the enzyme (E) is saturated.
Since the substrate has already bound at the rate-limiting step, kcat is a first-order rate constant
Therefore:
kcat has units of s−1 or “per second”
Catalytic Efficiency
Which enzyme is more efficient?
best enzyme= really fast at making product and if we don't need a substrate to do that (as high affinity for substrate)
bad enzyme= very slow at making product and needs lot of substrate for rxn to go
Some enzymes can be fast but can have low affinity and vise versa
Some enzymes:
Require very little substrate → low Km
But are very slow → low kcat
Other enzymes:
Have a high substrate concentration dependence → high Km
But are very efficient at catalysis → high kcat
Therefore, we need to consider both Km and kcat.
Catalytic efficiency
Catalytic efficiency combines both parameters: Kcat/Km
This is also called the specificity constant.
Units
s-1 /M, or s-1 M-1, or M-1 s-1
You want specialty content to be high for it to be good enzymes (comes from kcat and km or both)
Diffusion limit
There is an upper limit to kcat/Km aka specificity constant
maximum possible way two things come together via diffusion
This is the upper limit at which E and S can possibly come together by diffusion: 10^8-10^9 s-1 M- (can't go higher than 10^8 - 10^9)
we can get to this number through either high Kcat or Km or both
Enzymes cannot be more efficient than this diffusion limit, and some enzymes reach this level.
There are many ways to get to “catalytic perfection!”
Lineweaver-Burk Plot
graph that helps us understand enzymatic concepts
The Michaelis-Menten equation is:
This is the Lineweaver-Burk equation.
Characteristics of Enzyme Reactions
What other factors influence enzyme rate besides [S]?
pH
Enzyme has evolved to have certaingroupprotatnted and other deportantes depending on its environment (so changes in pH changed protonation, thus impacting shape)
The protonated and deprotonated group sit likes at its biological pH helps to make the correct shape it needs
dependent on cellular conditions it lives in (will vary)
Temperature
temperature will increase the rate of reaction but then the enzyme will start falling apart if increased too much
pH Dependence of Chymotrypsin
For optimal activity:
H57 must be deprotonated
histidine but be deported for enzyme to work
The amino terminus of the B chain must be protonated
the amino acid must be protonated to work
Thus we have a narrow pH band to fulfill these requirements
Therefore, enzyme activity can depend strongly on pH because the protonation state of amino acid residues can affect enzyme function
Active Site
Enzyme catalysis occurs in the active site of the enzyme.
Features of the active site:
It demonstrates specificity
It has a high affinity for the correct substrate.
It has a shape closely similar to that of the substrate.
It is relatively small compared to the entire three-dimensional shape of the enzyme
The active site is relatively small compared to the whole protein
This is because it needs a specific conformation, so it's better if it's smaller
Its shape mirrors the shape of the transition state
Twists substrate into translation state, helping to promote it
Substrates are held weakly in the active site by weak, noncovalent interactions
Lots of binding and letting go before, so it doesn't automatically convert right away
This occurs before we convert to product
Not 100% successful, yet it is still fast
Enzyme Inhibition
Why are we interested in enzyme inhibition?
Many biological processes depend on inhibition.
Enzymes can be turned “on” and “off.”
Ie. via phosphorylation which changes shape of enzyme (changes active site, does not bind substrate the same way)
Pharmacological drugs are typically enzyme inhibitors
The major question is:
How do different types of inhibition affect enzyme activity and the plots we have discussed?
Reversible Inhibition
A reversible inhibitor can bind to and dissociate from the enzyme.
E+I⇌EI
Inhibitor binds to enzyme via non covalent interactions
Binds similarity to subtract (non covalent + uses equilibrium constant)
Three types that are covered:
Competitive
Uncompetitive
Mixed / noncompetitive
Little bit of competitive + uncompetitive
1. Competitive Inhibition
Competitive inhibitors compete with the substrate for the active site.
The inhibitor and substrate are therefore competing for access to the same active site.
What happens?
The inhibitor changes the enzyme's dependence on substrate concentration, meaning it changes the apparent Km.
This makes sense:
If there is enough substrate compared with the inhibitor, the substrate can outcompete the inhibitor.
Therefore, at a very high [S], the inhibitor can effectively be “washed out.”
The rate can eventually reach the same Vmax.
Inhibitor binds enzyme in a way that the substrate would
Competes with substrate to binding to active site
There are two competing rxns, either E + S or E + I
These are mutually exclusive
The inhibitor gets in the way (look like the substrate)
Removes enzyme for time pooling in enzyme pool TEMPORARILY
The more competitive inhibitor we bind, it will drive equally to formation of EI
Thus less E to bind and do rxn with S
The enzyme isn't broken, it has trouble finding subtract
This changes Km
When we add lot of substrate, it allows the enzyme to find the substrate and bind to it
It is now able to reach Vmax, however we needed to get a lot of substrate to do that
Appranat Km, Kmi
Km does not officially change (its constant), however it is a modify dKm when inhibitor is there
Effect of competitive inhibition
Km increases
Vmax stays the same
Competitive Inhibition Equation
Normal Michaelis-Menten:
With a competitive inhibitor:
In this context, the Km affected by α is called the apparent Km (Km impacted by the competitive inhibitor)
Why the “1”?
The equation includes:
α=1+[I]K1
The 1 represents the condition when there is no inhibitor:
[I]=0[I]=0
So:
α=1 and the equation returns to the normal Michaelis-Menten equation.
Ki= constant for the E + I → EI rxn
The Ki tells us the equilibrium constant of affinity for inhibitor for enzyme
As Km get larger, the Vo will decrease as the rate of reaction decreases
If a also get bigger, then it Vo will decrease
If subtract concentration is high, the effect of the inhibitor is washed out, which will lead to less change in Vo
Competitive Inhibition at Different [S]
At low [S]
The inhibitor has a greater effect because there is less substrate competing for the active site.
At high [S]
The substrate can outcompete the inhibitor.
Therefore, the effect of competitive inhibition can be overcome by increasing [S].
Competitive Inhibition on a Lineweaver-Burk Plot
A competitive inhibitor:
Changes apparent Km
Does not change Vmax
Changes the slope
Changes the x-intercept
-a/Km
The lines intersect on the y-axis because Vmax is unchanged.
Y-int stays the same
The alpha term changes the Km
As the alpha value increases (adding more inhibitor), the slope gets steeper
2. Uncompetitive Inhibition
An uncompetitive inhibitor binds away from the active site to the ES complex
Binds at a place other than the active cite
This twists/bends the enzyme such that the active site is not perfect anymore
Could laso make E + I → EI + S → ESI
This is unique as we can make ES
In competitive, we had competition between S and I, here S and I can join together
It will strain the active site
Pure uncompetitive inhibitor does not impact affinity between enzyme and substrate, it just changes the enzyme ability to convert ES to P
Substrate can still bind, doesn't change active site where it can't bind
It influences kcat, it includes that 2nd reaction
This will then influence Vmax
Cant be fixed with more subtract
This will just make more ESI
By binding away from the active site, the uncompetitive inhibitor strains the enzyme and decreases its efficiency.
Uncompetitive Inhibition Equation
To account for the effect of an uncompetitive inhibitor, we introduce α′.
Normal Michaelis-Menten:
With an uncompetitive inhibitor:
Uses alpha primer (a’) which gets added to the subtract
This means it will have an effect no matter what substrate concentration is
Enzyme is always inhibited as its always multiplied by a’
K’i
Effect of Uncompetitive Inhibition
An uncompetitive inhibitor lowers:
Vmax (vo= Vmax/ a’)
The denominator will go up where
Apparent Km (less substrate required to get to 1/2 of the lower Vmax; Km apparent = Km / a ‘)
We need less substrate to get to new Vmax
Therefore:
Uncompetitive inhibition decreases both Vmax and Km by the same factor.
Because both decrease by the same factor, their ratio does not change.
Uncompetitive Inhibition at Different [S]
At very low [S] (< Km), apparent Vo = Vo, since = α‘[S] ~ 0
The denominator will be dominated by Km when substrate is low
Thus Vo will be the same
The reaction will be dominating my enzyme binding substrate at low concentrations (the reaction doesn't really happen for broth Km and Kmi as the rat eliminating step is finding substrate)
At high [S] (> Km), α‘[S] gets bigger and bigger, and Vo < Vo
The inhibitor has a greater effect at high [S].
In uncompetitive inhibition, the inhibitor binds to the ES complex to form ESI. This makes the enzyme more likely to remain in a substrate-bound state rather than a free-enzyme state. Therefore, a lower substrate concentration is needed to reach half of the newVamx so the apparent Km decreases. The Vmaxalso decreases because the ESI complex cannot produce product while the inhibitor is bound, reducing the rate of product formation.
Uncompetitive Inhibition on a Lineweaver-Burk Plot
Both Km and Vmax are altered.
Km (x-intercept): altered
Vmax (y-intercept): altered
Doesn't go as fast as it can
Slope: not altered
Slope= (the ratio that the apparent Km and Vmax have been decreased by)
The Km and Vmax both stay the same as they change by same factor
The lines are therefore parallel on a Lineweaver-Burk plot.
3. Noncompetitive / Mixed Inhibition
A noncompetitive or mixed inhibitor can bind to either:
Free enzyme (E)
Enzyme-substrate complex (ES) aka a bound enzyme
Mixed inhibition is a combination of competitive and uncompetitive inhibition.
Therefore, there is both these terms in the equation:
α
Α′
The inhibitor has an effect on both Km and Vmax
Noncompetitive / Mixed Inhibition on a Lineweaver-Burk Plot
Noncompetitive/mixed inhibition is characterized by a Lineweaver-Burk plot in which:
The point where the lines cross is not on the y-axis
This indicates that Vmax has changed
Everything changes but there is a point of interaction (away from Y-int due to change in Vmax)
Summary: Reversible Inhibition
Irreversible Inhibition
Irreversible inhibition often occurs when the inhibitor makes an irreversible covalent bond in the active site of the enzyme.
Inhibitor is covalently bound to active site
Now the enzyme is locked to inhibitor
This can:
Lock the enzyme into an inactive conformation
Permanently inactivate the enzyme
The inhibitor must look at least somewhat similar to the substrate so that the enzyme can interact with it.
Example: Chymotrypsin
Inhibition of chymotrypsin with DIFP
Chymotrypsin has a serine that binds to DIFP (which will bind to it and cant let go)
DIFP looks like the substrate
The substrate for chymotrypsin is proteins
Breaks peptide bonds
DIFP looks like a protein with a peptide bond
Due to phosphate in DIFP, the enzyme won't let go of it, and it is locked in place (it is now dead)
KNOW THESE STEPS
DFP interacts with the enzyme's active site.
The active-site serine reacts with DFP.
A covalent modification forms.
The enzyme is irreversibly inactivated and can no longer carry out its normal catalytic functi
Irreversible Inhibition and African Sleeping Sickness
Disease where someone is bitten by fly with trypanosome
A compound can be used to inactivate an enzyme that is important for DNA packaging in the disease-causing trypanosome.
We have enzyme called Ornithine decarboxylase
Converts ornithine → putrescine
Uses pyridoxal phosphate (PLP) as a cofactor
We do this reaction and trypanasome
Humans:
Continually synthesize and break down the enzyme.
We make a lot of Ornithine decarboxylase and it is unstable so it degrade quickly (to leave a constant amount left over)
Trypanosome:
The enzyme has lower synthesis
Has higher stability so they don't need to make as much to leave that constant among
Ornithine decarboxylase (ODC) uses PLP as a cofactor to convert ornithine into putrescine.
DFMO resembles ornithine and enters the active site.
PLP participates in the enzyme's catalytic processing of DFMO.
The enzyme generates a reactive intermediate from DFMO.
That intermediate covalently inactivates ODC.
The Ornithine decarboxylase is therefore killed
This kills trypanosome but now us as we always make this enzyme and it degrades quickly
Doesn't have big effect
Trypanosome makes the enzyme slowly so it cant quickly make enzyme to quickly continue its reaction
Therefore, the drug can have a greater effect on the trypanosome.
KNOW BIOLOGY/MEDICINE OF IT
DFMO
DFMO is converted into a reactive intermediate by the enzyme.
The reactive intermediate then:
Covalently links to the enzyme
Inactivates the enzyme
Effectively “kills” the enzyme
Why can humans survive?
Humans are continually making more ornithine decarboxylase.
Therefore, humans can replace the enzyme that becomes inactivated.
For the trypanosome, the drug is lethal because its enzyme is not replaced as effectively.