Knots for Joining Two Cables

KNOTS FOR JOINING TWO CABLES BY THEIR ENDS (CHICOTES)

  • General Purpose: Chapter 8, Section Charlie focuses on knots specifically designed to unite two cables using their respective ends (chicotes).

THE REEF KNOT (NÓ DIREITO)

  • Definition and Construction:     * The Reef Knot (Nó Direito) is used to unite two rope ends (chicotes).     * Its construction requires that the second half-hitch (meia volta) be executed in the inverse direction of the first half-hitch.
  • Material Compatibility Requirements:     * The knot is extremely reliable when the two cable ends have equal size (comprimento), are made of the same material, and have the same gauge/thickness (bitola).     * Under these conditions (same cable, material, and gauge), the knot is very difficult to undo unintentionally.
  • Critical Limitations and Risks:     * The knot "does not slip" (não recorre) normally, but if the cables have different sizes or are made of different materials, it may undo itself spontaneously.     * Prohibited Use - Working Gear: It must never be used to join cables for running rigging (aparelho de laborar) or to splice hawsers (emendar espias).     * Reason for Prohibition: Cables in these contexts work under heavy tension. Once the Reef Knot is subjected to tension, it becomes nearly impossible to undo.
  • Appropriate Applications:     * Suitable for thin cables that do not require high strength.     * Appropriate for finishing any type of permanent lashing (amarração definitiva).

THE GRANNY KNOT (NÓ TORTO)

  • Construction: In the Granny Knot (Nó Torto), both half-hitches (meia voltas) are performed in the same direction.
  • Use Case: This knot is not used in professional practice because it slips (recorre).

THE SINGLE SHEET BEND (NÓ DE ESCOTA SINGELO)

  • General Utility:     * Used to join two cables by their ends (chicotes).     * Used to join one end (chicote) to a loop (olhal), a bight (mão), or a strap (alça).
  • Structure: It resembles the Reef Knot, but the end (chicote) passes under the half-hitch.
  • Specific Exam Uses (Bizu): Students should memorize the following four specific utilities:     1. Flag Halyards: Tying a halyard without a hook (adriça sem gato) to a flag.     2. Small Boats: Securing the painter (bossa) of a small vessel.     3. Booms: Attached to the bight (mão) of the head rope (cabo de cabeça) of a boat boom (pau de surriola).     4. Different Gauges: Used to join thin cables of different gauges (bitolas). Note: The Reef Knot cannot be used for cables of different gauges.
  • Practical Scenario - Boarding a Ship:     1. A boat boom (pau de surriola) is deployed from the side (costado) of a ship.     2. A small vessel approaches to allow boarding via the ladder.     3. The head rope (cabo de cabeça) of the boom is present.     4. The painter (bossa) of the small vessel is secured to the head rope's loop (mão) using a Single Sheet Bend.

THE DOUBLE SHEET BEND (NÓ DE ESCOTA DOBRADO) AND SPECIALIZED SHEET BENDS

  • Construction of the Double Sheet Bend: The end (chicote) performs a round turn (volta redonda) instead of a single turn to provide greater security.
  • Primary Utility:     * Used to join two hawsers (espias), particularly when one hawser has a pre-existing loop (alça) or if they are of different sizes.     * Rule of Application: In cases of differing sizes, the thicker hawser (espia de maior grossura) must be the one that forms the loop (alça).
  • Rose Sheet Bend (Nó de Escota Rosa): A variation (shown in figure 8.37) also used to unite cables of different gauges (bitolas).

THE RUNNING KNOT OR FISHERMAN'S KNOT (NÓ DE CORRER OU NÓ DE PESCADOR)

  • Definition: A knot used to join two cables together.
  • Construction Method:     1. Take the end (chicote) of the first cable and perform a half-hitch (meia volta) around the second cable.     2. Take the end (chicote) of the second cable and perform a half-hitch around the first cable.     3. Tension is applied by pulling the two cables by their bights (seio), causing the knot to tighten against itself.
  • Section Bravo vs. Section Charlie Distinction:     * Section Bravo Version: A "Fisherman's Knot" used to shorten a line or hide a frayed/worn spot (ponto coçado).     * Section Charlie Version: The "Fisherman's Knot" in this section is a synonym for the Running Knot (Nó de Correr) used for joining ends.

THE FRIAR'S KNOT (NÓ DE FRADE)

  • Primary Uses:     1. Ornamental purposes (ornamentação).     2. Limiting the rudder angle (limitar o ângulo de leme) of small vessels.
  • Application Mechanism: By placing the knot on a cable associated with the steering of a small boat, it acts as a physical stop to prevent the rudder from turning past a certain point.

ABOSSADURAS (JOINING HAWSER LASHINGS)

  • Definition: Methods used to join two hawsers (espias) with speed and safety.
  • Physical Characteristics: They are voluminous/bulky. Consequently, they cannot pass through (não podem gornir) capstans (cabrestantes) or fairleads/returns (retornos).
  • Variations (Classified Alpha through Echo):     * Case Alpha: Simple connection.     * Case Bravo: One cut (corte) with seizing/buttons (botões).     * Case Charlie: Multiple cuts with seizing/buttons.     * Case Echo: Crossing connections with seizing/buttons.
  • Advantage of Case Alpha (using two Bowlines/Lais de Guia): Instead of using a Square Knot, which jams under tension, using two Bowlines (one in each hawser) allows the knot to be undone easily even after significant tension has been applied to the mooring lines.